#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/serial.h>
#include "8250.h"
*/
#define CONFIG_HUB6 1
-#include <asm/serial.h>
-
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
i->head = &up->list;
spin_unlock_irq(&i->lock);
+ irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
+
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
}
if (is_real_interrupt(up->port.irq)) {
+ unsigned char iir1;
/*
* Test for UARTs that do not reassert THRE when the
* transmitter is idle and the interrupt has already
wait_for_xmitr(up, UART_LSR_THRE);
serial_out_sync(up, UART_IER, UART_IER_THRI);
udelay(1); /* allow THRE to set */
- serial_in(up, UART_IIR);
+ iir1 = serial_in(up, UART_IIR);
serial_out(up, UART_IER, 0);
serial_out_sync(up, UART_IER, UART_IER_THRI);
udelay(1); /* allow a working UART time to re-assert THRE */
* If the interrupt is not reasserted, setup a timer to
* kick the UART on a regular basis.
*/
- if (iir & UART_IIR_NO_INT) {
+ if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
pr_debug("ttyS%d - using backup timer\n", port->line);
up->timer.function = serial8250_backup_timeout;
up->timer.data = (unsigned long)up;
}
serial8250_set_mctrl(&up->port, up->port.mctrl);
spin_unlock_irqrestore(&up->port.lock, flags);
- tty_termios_encode_baud_rate(termios, baud, baud);
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
}
static void
}
if (up->port.flags & UPF_IOREMAP) {
- up->port.membase = ioremap(up->port.mapbase, size);
+ up->port.membase = ioremap_nocache(up->port.mapbase,
+ size);
if (!up->port.membase) {
release_mem_region(up->port.mapbase, size);
ret = -ENOMEM;