* Written By:
* Ed Lin <promise_linux@promise.com>
*
- * Version: 3.0.0.1
- *
*/
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/sched.h>
#include <linux/time.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
#define DRV_NAME "stex"
-#define ST_DRIVER_VERSION "3.0.0.1"
+#define ST_DRIVER_VERSION "3.6.0000.1"
#define ST_VER_MAJOR 3
-#define ST_VER_MINOR 0
+#define ST_VER_MINOR 6
#define ST_OEM 0
#define ST_BUILD_VER 1
MU_STATE_STARTED = 4,
MU_STATE_RESETTING = 5,
- MU_MAX_DELAY_TIME = 240000,
+ MU_MAX_DELAY = 120,
MU_HANDSHAKE_SIGNATURE = 0x55aaaa55,
MU_HANDSHAKE_SIGNATURE_HALF = 0x5a5a0000,
+ MU_HARD_RESET_WAIT = 30000,
HMU_PARTNER_TYPE = 2,
/* firmware returned values */
SG_CF_64B = 0x40, /* 64 bit item */
SG_CF_HOST = 0x20, /* sg in host memory */
- ST_MAX_ARRAY_SUPPORTED = 16,
- ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1),
- ST_MAX_LUN_PER_TARGET = 16,
-
st_shasta = 0,
st_vsc = 1,
- st_yosemite = 2,
+ st_vsc1 = 2,
+ st_yosemite = 3,
PASSTHRU_REQ_TYPE = 0x00000001,
PASSTHRU_REQ_NO_WAKEUP = 0x00000100,
MGT_CMD_SIGNATURE = 0xba,
INQUIRY_EVPD = 0x01,
+
+ ST_ADDITIONAL_MEM = 0x200000,
};
/* SCSI inquiry data */
__le32 partner_ver_minor;
__le32 partner_ver_oem;
__le32 partner_ver_build;
- u32 reserved1[4];
+ __le32 extra_offset; /* NEW */
+ __le32 extra_size; /* NEW */
+ u32 reserved1[2];
};
struct req_msg {
void __iomem *mmio_base; /* iomapped PCI memory space */
void *dma_mem;
dma_addr_t dma_handle;
+ size_t dma_size;
struct Scsi_Host *host;
struct pci_dev *pdev;
u16 tag;
host = cmd->device->host;
id = cmd->device->id;
- lun = cmd->device->channel; /* firmware lun issue work around */
+ lun = cmd->device->lun;
hba = (struct st_hba *) &host->hostdata[0];
switch (cmd->cmnd[0]) {
stex_invalid_field(cmd, done);
return 0;
}
+ case REPORT_LUNS:
+ /*
+ * The shasta firmware does not report actual luns in the
+ * target, so fail the command to force sequential lun scan.
+ * Also, the console device does not support this command.
+ */
+ if (hba->cardtype == st_shasta || id == host->max_id - 1) {
+ stex_invalid_field(cmd, done);
+ return 0;
+ }
+ break;
+ case TEST_UNIT_READY:
+ if (id == host->max_id - 1) {
+ cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ done(cmd);
+ return 0;
+ }
+ break;
case INQUIRY:
- if (id != ST_MAX_ARRAY_SUPPORTED)
+ if (id != host->max_id - 1)
break;
if (lun == 0 && (cmd->cmnd[1] & INQUIRY_EVPD) == 0) {
stex_direct_copy(cmd, console_inq_page,
ver.oem = ST_OEM;
ver.build = ST_BUILD_VER;
ver.signature[0] = PASSTHRU_SIGNATURE;
- ver.console_id = ST_MAX_ARRAY_SUPPORTED;
+ ver.console_id = host->max_id - 1;
ver.host_no = hba->host->host_no;
cmd->result = stex_direct_copy(cmd, &ver, sizeof(ver)) ?
DID_OK << 16 | COMMAND_COMPLETE << 8 :
req = stex_alloc_req(hba);
- if (hba->cardtype == st_yosemite) {
- req->lun = lun * (ST_MAX_TARGET_NUM - 1) + id;
- req->target = 0;
- } else {
- req->lun = lun;
- req->target = id;
- }
+ req->lun = lun;
+ req->target = id;
/* cdb */
memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH);
ccb->srb_status = SRB_STATUS_SELECTION_TIMEOUT;
else
ccb->srb_status = SRB_STATUS_SUCCESS;
- } else if (ccb->cmd->cmnd[0] == REPORT_LUNS) {
- u8 *report_lun_data = (u8 *)hba->copy_buffer;
-
- count = STEX_EXTRA_SIZE;
- stex_internal_copy(ccb->cmd, report_lun_data,
- &count, ccb->sg_count, ST_FROM_CMD);
- if (report_lun_data[2] || report_lun_data[3]) {
- report_lun_data[2] = 0x00;
- report_lun_data[3] = 0x08;
- stex_internal_copy(ccb->cmd, report_lun_data,
- &count, ccb->sg_count, ST_TO_CMD);
- }
}
}
struct handshake_frame *h;
dma_addr_t status_phys;
u32 data;
- int i;
+ unsigned long before;
if (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
writel(MU_INBOUND_DOORBELL_HANDSHAKE, base + IDBL);
readl(base + IDBL);
- for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE
- && i < MU_MAX_DELAY_TIME; i++) {
+ before = jiffies;
+ while (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
+ if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): no handshake signature\n",
+ pci_name(hba->pdev));
+ return -1;
+ }
rmb();
msleep(1);
}
-
- if (i == MU_MAX_DELAY_TIME) {
- printk(KERN_ERR DRV_NAME
- "(%s): no handshake signature\n",
- pci_name(hba->pdev));
- return -1;
- }
}
udelay(10);
h->status_cnt = cpu_to_le16(MU_STATUS_COUNT);
stex_gettime(&h->hosttime);
h->partner_type = HMU_PARTNER_TYPE;
+ if (hba->dma_size > STEX_BUFFER_SIZE) {
+ h->extra_offset = cpu_to_le32(STEX_BUFFER_SIZE);
+ h->extra_size = cpu_to_le32(ST_ADDITIONAL_MEM);
+ } else
+ h->extra_offset = h->extra_size = 0;
status_phys = hba->dma_handle + MU_REQ_BUFFER_SIZE;
writel(status_phys, base + IMR0);
readl(base + IDBL); /* flush */
udelay(10);
- for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE
- && i < MU_MAX_DELAY_TIME; i++) {
+ before = jiffies;
+ while (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
+ if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): no signature after handshake frame\n",
+ pci_name(hba->pdev));
+ return -1;
+ }
rmb();
msleep(1);
}
- if (i == MU_MAX_DELAY_TIME) {
- printk(KERN_ERR DRV_NAME
- "(%s): no signature after handshake frame\n",
- pci_name(hba->pdev));
- return -1;
- }
-
writel(0, base + IMR0);
readl(base + IMR0);
writel(0, base + OMR0);
u32 data;
int result = SUCCESS;
unsigned long flags;
+
+ printk(KERN_INFO DRV_NAME
+ "(%s): aborting command\n", pci_name(hba->pdev));
+ scsi_print_command(cmd);
+
base = hba->mmio_base;
spin_lock_irqsave(host->host_lock, flags);
if (tag < host->can_queue && hba->ccb[tag].cmd == cmd)
pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &pci_bctl);
pci_bctl |= PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
- msleep(1);
+
+ /*
+ * 1 ms may be enough for 8-port controllers. But 16-port controllers
+ * require more time to finish bus reset. Use 100 ms here for safety
+ */
+ msleep(100);
pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
- for (i = 0; i < MU_MAX_DELAY_TIME; i++) {
+ for (i = 0; i < MU_HARD_RESET_WAIT; i++) {
pci_read_config_word(hba->pdev, PCI_COMMAND, &pci_cmd);
if (pci_cmd != 0xffff && (pci_cmd & PCI_COMMAND_MASTER))
break;
unsigned long before;
hba = (struct st_hba *) &cmd->device->host->hostdata[0];
+ printk(KERN_INFO DRV_NAME
+ "(%s): resetting host\n", pci_name(hba->pdev));
+ scsi_print_command(cmd);
+
hba->mu_status = MU_STATE_RESETTING;
if (hba->cardtype == st_shasta)
goto out_scsi_host_put;
}
- hba->mmio_base = ioremap(pci_resource_start(pdev, 0),
+ hba->mmio_base = ioremap_nocache(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if ( !hba->mmio_base) {
printk(KERN_ERR DRV_NAME "(%s): memory map failed\n",
goto out_iounmap;
}
+ hba->cardtype = (unsigned int) id->driver_data;
+ if (hba->cardtype == st_vsc && (pdev->subsystem_device & 0xf) == 0x1)
+ hba->cardtype = st_vsc1;
+ hba->dma_size = (hba->cardtype == st_vsc1) ?
+ (STEX_BUFFER_SIZE + ST_ADDITIONAL_MEM) : (STEX_BUFFER_SIZE);
hba->dma_mem = dma_alloc_coherent(&pdev->dev,
- STEX_BUFFER_SIZE, &hba->dma_handle, GFP_KERNEL);
+ hba->dma_size, &hba->dma_handle, GFP_KERNEL);
if (!hba->dma_mem) {
err = -ENOMEM;
printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE;
hba->mu_status = MU_STATE_STARTING;
- hba->cardtype = (unsigned int) id->driver_data;
-
- /* firmware uses id/lun pair for a logical drive, but lun would be
- always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use
- channel to map lun here */
- host->max_channel = ST_MAX_LUN_PER_TARGET - 1;
- host->max_id = ST_MAX_TARGET_NUM;
- host->max_lun = 1;
+ if (hba->cardtype == st_shasta) {
+ host->max_lun = 8;
+ host->max_id = 16 + 1;
+ } else if (hba->cardtype == st_yosemite) {
+ host->max_lun = 128;
+ host->max_id = 1 + 1;
+ } else {
+ /* st_vsc and st_vsc1 */
+ host->max_lun = 1;
+ host->max_id = 128 + 1;
+ }
+ host->max_channel = 0;
host->unique_id = host->host_no;
host->max_cmd_len = STEX_CDB_LENGTH;
out_free_irq:
free_irq(pdev->irq, hba);
out_pci_free:
- dma_free_coherent(&pdev->dev, STEX_BUFFER_SIZE,
+ dma_free_coherent(&pdev->dev, hba->dma_size,
hba->dma_mem, hba->dma_handle);
out_iounmap:
iounmap(hba->mmio_base);
pci_release_regions(hba->pdev);
- dma_free_coherent(&hba->pdev->dev, STEX_BUFFER_SIZE,
+ dma_free_coherent(&hba->pdev->dev, hba->dma_size,
hba->dma_mem, hba->dma_handle);
}
git.openpandora.org / pandora-kernel.git / blobdiff