#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/moduleparam.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/cdev.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/dma.h>
static struct class *st_sysfs_class;
MODULE_AUTHOR("Kai Makisara");
-MODULE_DESCRIPTION("SCSI Tape Driver");
+MODULE_DESCRIPTION("SCSI tape (st) driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
/* Set 'perm' (4th argument) to 0 to disable module_param's definition
* of sysfs parameters (which module_param doesn't yet support).
static int st_probe(struct device *);
static int st_remove(struct device *);
-static int st_init_command(struct scsi_cmnd *);
static void do_create_driverfs_files(void);
static void do_remove_driverfs_files(void);
.probe = st_probe,
.remove = st_remove,
},
- .init_command = st_init_command,
};
static int st_compression(struct scsi_tape *, int);
#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
-static DECLARE_MUTEX(st_ref_sem);
+static DEFINE_MUTEX(st_ref_mutex);
\f
#include "osst_detect.h"
{
struct scsi_tape *STp = NULL;
- down(&st_ref_sem);
+ mutex_lock(&st_ref_mutex);
write_lock(&st_dev_arr_lock);
if (dev < st_dev_max && scsi_tapes != NULL)
STp = NULL;
out:
write_unlock(&st_dev_arr_lock);
- up(&st_ref_sem);
+ mutex_unlock(&st_ref_mutex);
return STp;
}
{
struct scsi_device *sdev = STp->device;
- down(&st_ref_sem);
+ mutex_lock(&st_ref_mutex);
kref_put(&STp->kref, scsi_tape_release);
scsi_device_put(sdev);
- up(&st_ref_sem);
+ mutex_unlock(&st_ref_mutex);
}
struct st_reject_data {
STp->buffer->cmdstat.have_sense = 0;
STp->buffer->syscall_result = 0;
- if (scsi_execute_async(STp->device, cmd, direction,
+ if (scsi_execute_async(STp->device, cmd, COMMAND_SIZE(cmd[0]), direction,
&((STp->buffer)->sg[0]), bytes, (STp->buffer)->sg_segs,
timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) {
/* could not allocate the buffer or request was too large */
i = sizeof(struct st_buffer) + (max_sg - 1) * sizeof(struct scatterlist) +
max_sg * sizeof(struct st_buf_fragment);
- tb = kmalloc(i, priority);
+ tb = kzalloc(i, priority);
if (!tb) {
printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
return NULL;
}
- memset(tb, 0, i);
tb->frp_segs = tb->orig_frp_segs = 0;
tb->use_sg = max_sg;
tb->frp = (struct st_buf_fragment *)(&(tb->sg[0]) + max_sg);
goto out_put_disk;
}
- tmp_da = kmalloc(tmp_dev_max * sizeof(struct scsi_tape *), GFP_ATOMIC);
+ tmp_da = kzalloc(tmp_dev_max * sizeof(struct scsi_tape *), GFP_ATOMIC);
if (tmp_da == NULL) {
write_unlock(&st_dev_arr_lock);
printk(KERN_ERR "st: Can't extend device array.\n");
goto out_put_disk;
}
- memset(tmp_da, 0, tmp_dev_max * sizeof(struct scsi_tape *));
if (scsi_tapes != NULL) {
memcpy(tmp_da, scsi_tapes,
st_dev_max * sizeof(struct scsi_tape *));
if (i >= st_dev_max)
panic("scsi_devices corrupt (st)");
- tpnt = kmalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
+ tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
if (tpnt == NULL) {
write_unlock(&st_dev_arr_lock);
printk(KERN_ERR "st: Can't allocate device descriptor.\n");
goto out_put_disk;
}
- memset(tpnt, 0, sizeof(struct scsi_tape));
kref_init(&tpnt->kref);
tpnt->disk = disk;
sprintf(disk->disk_name, "st%d", i);
do_create_class_files(tpnt, dev_num, mode);
}
- for (mode = 0; mode < ST_NBR_MODES; ++mode) {
- /* Make sure that the minor numbers corresponding to the four
- first modes always get the same names */
- i = mode << (4 - ST_NBR_MODE_BITS);
- /* Rewind entry */
- devfs_mk_cdev(MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, 0)),
- S_IFCHR | S_IRUGO | S_IWUGO,
- "%s/mt%s", SDp->devfs_name, st_formats[i]);
- /* No-rewind entry */
- devfs_mk_cdev(MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, 1)),
- S_IFCHR | S_IRUGO | S_IWUGO,
- "%s/mt%sn", SDp->devfs_name, st_formats[i]);
- }
- disk->number = devfs_register_tape(SDp->devfs_name);
-
sdev_printk(KERN_WARNING, SDp,
- "Attached scsi tape %s", tape_name(tpnt));
+ "Attached scsi tape %s\n", tape_name(tpnt));
printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
queue_dma_alignment(SDp->request_queue) + 1);
scsi_tapes[i] = NULL;
st_nr_dev--;
write_unlock(&st_dev_arr_lock);
- devfs_unregister_tape(tpnt->disk->number);
sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
"tape");
for (mode = 0; mode < ST_NBR_MODES; ++mode) {
- j = mode << (4 - ST_NBR_MODE_BITS);
- devfs_remove("%s/mt%s", SDp->devfs_name, st_formats[j]);
- devfs_remove("%s/mt%sn", SDp->devfs_name, st_formats[j]);
for (j=0; j < 2; j++) {
class_device_destroy(st_sysfs_class,
MKDEV(SCSI_TAPE_MAJOR,
}
}
- down(&st_ref_sem);
+ mutex_lock(&st_ref_mutex);
kref_put(&tpnt->kref, scsi_tape_release);
- up(&st_ref_sem);
+ mutex_unlock(&st_ref_mutex);
return 0;
}
}
* scsi_tape_release - Called to free the Scsi_Tape structure
* @kref: pointer to embedded kref
*
- * st_ref_sem must be held entering this routine. Because it is
+ * st_ref_mutex must be held entering this routine. Because it is
* called on last put, you should always use the scsi_tape_get()
* scsi_tape_put() helpers which manipulate the semaphore directly
* and never do a direct kref_put().
return;
}
-static void st_intr(struct scsi_cmnd *SCpnt)
-{
- /*
- * The caller should be checking the request's errors
- * value.
- */
- scsi_io_completion(SCpnt, SCpnt->bufflen, 0);
-}
-
-/*
- * st_init_command: only called via the scsi_cmd_ioctl (block SG_IO)
- * interface for REQ_BLOCK_PC commands.
- */
-static int st_init_command(struct scsi_cmnd *SCpnt)
-{
- if (!(SCpnt->request->flags & REQ_BLOCK_PC))
- return 0;
-
- scsi_setup_blk_pc_cmnd(SCpnt);
- SCpnt->done = st_intr;
- return 1;
-}
-
static int __init init_st(void)
{
validate_options();
git.openpandora.org / pandora-kernel.git / blobdiff