oneConnect = 1;
m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
break;
+ case PCI_DEVICE_ID_TS_BE3:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCeXXXXX-F", max_speed, "PCIe"};
+ break;
default:
m = (typeof(m)){ NULL };
break;
mempool_free(mboxq, phba->mbox_mem_pool);
}
+/**
+ * lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function uses the QUERY_FW_CFG mailbox command to determine if the
+ * firmware loaded supports FCoE. A return of zero indicates that the mailbox
+ * was successful and the firmware supports FCoE. Any other return indicates
+ * a error. It is assumed that this function will be called before interrupts
+ * are enabled.
+ **/
+static int
+lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
+ uint32_t length;
+ uint32_t shdr_status, shdr_add_status;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2621 Failed to allocate mbox for "
+ "query firmware config cmd\n");
+ return -ENOMEM;
+ }
+ query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
+ length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_QUERY_FW_CFG,
+ length, LPFC_SLI4_MBX_EMBED);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &query_fw_cfg->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &query_fw_cfg->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2622 Query Firmware Config failed "
+ "mbx status x%x, status x%x add_status x%x\n",
+ rc, shdr_status, shdr_add_status);
+ return -EINVAL;
+ }
+ if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2623 FCoE Function not supported by firmware. "
+ "Function mode = %08x\n",
+ query_fw_cfg->function_mode);
+ return -EINVAL;
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return 0;
+}
+
/**
* lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
* @phba: pointer to lpfc hba data structure.
{
uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
int rc;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2546 New FCF found index 0x%x tag 0x%x\n",
- acqe_fcoe->fcf_index,
+ acqe_fcoe->index,
acqe_fcoe->event_tag);
/*
* If the current FCF is in discovered state, or
case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2549 FCF disconnected fron network index 0x%x"
- " tag 0x%x\n", acqe_fcoe->fcf_index,
+ " tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
/* If the event is not for currently used fcf do nothing */
- if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+ if (phba->fcf.fcf_indx != acqe_fcoe->index)
break;
/*
* Currently, driver support only one FCF - so treat this as
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
-
+ case LPFC_FCOE_EVENT_TYPE_CVL:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2718 Clear Virtual Link Received for VPI 0x%x"
+ " tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
+ vport = lpfc_find_vport_by_vpid(phba,
+ acqe_fcoe->index /*- phba->vpi_base*/);
+ if (!vport)
+ break;
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp)
+ break;
+ shost = lpfc_shost_from_vport(vport);
+ lpfc_linkdown_port(vport);
+ if (vport->port_type != LPFC_NPIV_PORT) {
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_DELAY_TMO;
+ spin_unlock_irq(shost->host_lock);
+ ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
+ vport->port_state = LPFC_FLOGI;
+ }
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0288 Unknown FCoE event type 0x%x event tag "
if (unlikely(rc))
goto out_free_bsmbx;
+ rc = lpfc_sli4_fw_cfg_check(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
/* Set up the hba's configuration parameters. */
rc = lpfc_sli4_read_config(phba);
if (unlikely(rc))
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
+ struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
goto out_destroy_shost;
}
+ shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
+ if (shost)
+ scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
+ struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
int mcnt;
goto out_destroy_shost;
}
+ shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
+ if (shost)
+ scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TS_BE3,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
git.openpandora.org / pandora-kernel.git / blobdiff