u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
+ u32 sp_timeouts = 0;
iphy->link_layer_registers = reg;
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
writel(llctl, &iphy->link_layer_registers->link_layer_control);
+ sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+ /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+ /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can
+ * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+ */
+ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+ writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
if (is_a2(ihost->pdev)) {
/* Program the max ARB time for the PHY to 700us so we inter-operate with
* the PMC expander which shuts down PHYs if the expander PHY generates too
__func__,
event_code);
- return SCI_FAILURE;;
+ return SCI_FAILURE;
}
return SCI_SUCCESS;
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
ret = isci_port_perform_hard_reset(ihost, iport, iphy);
break;
+ case PHY_FUNC_GET_EVENTS: {
+ struct scu_link_layer_registers __iomem *r;
+ struct sas_phy *phy = sas_phy->phy;
+
+ r = iphy->link_layer_registers;
+ phy->running_disparity_error_count = readl(&r->running_disparity_error_count);
+ phy->loss_of_dword_sync_count = readl(&r->loss_of_sync_error_count);
+ phy->phy_reset_problem_count = readl(&r->phy_reset_problem_count);
+ phy->invalid_dword_count = readl(&r->invalid_dword_counter);
+ break;
+ }
default:
dev_dbg(&ihost->pdev->dev,