include cacheflush.h in FEC driver

[pandora-kernel.git] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 874cfee..d2b3898 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -10,6 +10,7 @@ config RAID_ATTRS
 config SCSI
        tristate "SCSI device support"
        depends on BLOCK
+       select SCSI_DMA if HAS_DMA
        ---help---
          If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
          any other SCSI device under Linux, say Y and make sure that you know
@@ -29,6 +30,10 @@ config SCSI
          However, do not compile this as a module if your root file system
          (the one containing the directory /) is located on a SCSI device.
 
+config SCSI_DMA
+       bool
+       default n
+
 config SCSI_TGT
        tristate "SCSI target support"
        depends on SCSI && EXPERIMENTAL
@@ -60,6 +65,7 @@ config BLK_DEV_SD
        depends on SCSI
        ---help---
          If you want to use SCSI hard disks, Fibre Channel disks,
+         Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
          USB storage or the SCSI or parallel port version of
          the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
          the Disk-HOWTO and the Multi-Disk-HOWTO, available from
@@ -276,7 +282,7 @@ config SCSI_ISCSI_ATTRS
 
 config SCSI_SAS_ATTRS
        tristate "SAS Transport Attributes"
-       depends on SCSI
+       depends on SCSI && BLK_DEV_BSG
        help
          If you wish to export transport-specific information about
          each attached SAS device to sysfs, say Y.
@@ -285,8 +291,12 @@ source "drivers/scsi/libsas/Kconfig"
 
 endmenu
 
-menu "SCSI low-level drivers"
+menuconfig SCSI_LOWLEVEL
+       bool "SCSI low-level drivers"
        depends on SCSI!=n
+       default y
+
+if SCSI_LOWLEVEL
 
 config ISCSI_TCP
        tristate "iSCSI Initiator over TCP/IP"
@@ -477,7 +487,7 @@ source "drivers/scsi/aic94xx/Kconfig"
 # All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
        tristate "Adaptec I2O RAID support "
-       depends on !64BIT && SCSI && PCI
+       depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
        help
          This driver supports all of Adaptec's I2O based RAID controllers as 
          well as the DPT SmartRaid V cards.  This is an Adaptec maintained
@@ -539,7 +549,7 @@ config SCSI_HPTIOP
 
 config SCSI_BUSLOGIC
        tristate "BusLogic SCSI support"
-       depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
+       depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
        ---help---
          This is support for BusLogic MultiMaster and FlashPoint SCSI Host
          Adapters. Consult the SCSI-HOWTO, available from
@@ -1537,6 +1547,7 @@ source "drivers/scsi/arm/Kconfig"
 config JAZZ_ESP
        bool "MIPS JAZZ FAS216 SCSI support"
        depends on MACH_JAZZ && SCSI
+       select SCSI_SPI_ATTRS
        help
          This is the driver for the onboard SCSI host adapter of MIPS Magnum
          4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
@@ -1761,6 +1772,7 @@ config SUN3X_ESP
 config SCSI_SUNESP
        tristate "Sparc ESP Scsi Driver"
        depends on SBUS && SCSI
+       select SCSI_SPI_ATTRS
        help
          This is the driver for the Sun ESP SCSI host adapter. The ESP
          chipset is present in most SPARC SBUS-based computers.
@@ -1768,8 +1780,6 @@ config SCSI_SUNESP
          To compile this driver as a module, choose M here: the
          module will be called esp.
 
-#      bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
-
 config ZFCP
        tristate "FCP host bus adapter driver for IBM eServer zSeries"
        depends on S390 && QDIO && SCSI
@@ -1794,7 +1804,7 @@ config SCSI_SRP
          To compile this driver as a module, choose M here: the
          module will be called libsrp.
 
-endmenu
+endif # SCSI_LOWLEVEL
 
 source "drivers/scsi/pcmcia/Kconfig"