struct i2c_msg msg[4];
struct i2c_client *client;
struct rtc_device *rtc;
+ int alarm_valid;
int data_valid;
- int alarm;
};
static const struct i2c_device_id fm3130_id[] = {
{ "fm3130", 0 },
dev_dbg(dev, "invalid mode %d\n", mode);
break;
}
- /* Checking for alarm */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
- fm3130->alarm = 1;
- fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
- }
+
i2c_smbus_write_byte_data(fm3130->client,
FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
}
if (!fm3130->data_valid) {
/* We have invalid data in RTC, probably due
to battery faults or other problems. Return EIO
- for now, it will allow us to set data later insted
+ for now, it will allow us to set data later instead
of error during probing which disables device */
return -EIO;
}
struct fm3130 *fm3130 = dev_get_drvdata(dev);
int tmp;
struct rtc_time *tm = &alrm->time;
+
+ if (!fm3130->alarm_valid) {
+ /*
+ * We have invalid alarm in RTC, probably due to battery faults
+ * or other problems. Return EIO for now, it will allow us to
+ * set alarm value later instead of error during probing which
+ * disables device
+ */
+ return -EIO;
+ }
+
/* read the RTC alarm registers all at once */
tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
&fm3130->msg[2], 2);
fm3130->regs[FM3130_ALARM_DATE],
fm3130->regs[FM3130_ALARM_MONTHS]);
-
tm->tm_sec = bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
tm->tm_min = bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
tm->tm_hour = bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
tm->tm_mday = bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
tm->tm_mon = bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+
if (tm->tm_mon > 0)
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
"read alarm", tm->tm_sec, tm->tm_min,
tm->tm_hour, tm->tm_mday,
tm->tm_mon, tm->tm_year, tm->tm_wday);
+ /* check if alarm enabled */
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+ if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) &&
+ (~fm3130->regs[FM3130_RTC_CONTROL] &
+ FM3130_RTC_CONTROL_BIT_CAL)) {
+ alrm->enabled = 1;
+ }
+
return 0;
}
tm->tm_hour, tm->tm_mday,
tm->tm_mon, tm->tm_year, tm->tm_wday);
- if (tm->tm_sec != -1)
- fm3130->regs[FM3130_ALARM_SECONDS] =
- bin2bcd(tm->tm_sec) | 0x80;
+ fm3130->regs[FM3130_ALARM_SECONDS] =
+ (tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80;
- if (tm->tm_min != -1)
- fm3130->regs[FM3130_ALARM_MINUTES] =
- bin2bcd(tm->tm_min) | 0x80;
+ fm3130->regs[FM3130_ALARM_MINUTES] =
+ (tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80;
- if (tm->tm_hour != -1)
- fm3130->regs[FM3130_ALARM_HOURS] =
- bin2bcd(tm->tm_hour) | 0x80;
+ fm3130->regs[FM3130_ALARM_HOURS] =
+ (tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80;
- if (tm->tm_mday != -1)
- fm3130->regs[FM3130_ALARM_DATE] =
- bin2bcd(tm->tm_mday) | 0x80;
+ fm3130->regs[FM3130_ALARM_DATE] =
+ (tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80;
- if (tm->tm_mon != -1)
- fm3130->regs[FM3130_ALARM_MONTHS] =
- bin2bcd(tm->tm_mon + 1) | 0x80;
+ fm3130->regs[FM3130_ALARM_MONTHS] =
+ (tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80;
dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
fm3130->regs[FM3130_ALARM_SECONDS],
}
fm3130->regs[FM3130_RTC_CONTROL] =
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
- /* Checking for alarm */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
- fm3130->alarm = 1;
- fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
- }
+
+ /* enable or disable alarm */
if (alrm->enabled) {
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
(fm3130->regs[FM3130_RTC_CONTROL] &
} else {
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_RTC_CONTROL] &
- ~(FM3130_RTC_CONTROL_BIT_AEN));
+ ~(FM3130_RTC_CONTROL_BIT_CAL) &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
}
+
+ /* We assume here that data is valid once written */
+ if (!fm3130->alarm_valid)
+ fm3130->alarm_valid = 1;
+
return 0;
}
+static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int ret = 0;
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+ dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n",
+ enabled, fm3130->regs[FM3130_RTC_CONTROL]);
+
+ switch (enabled) {
+ case 0: /* alarm off */
+ ret = i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL) &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
+ break;
+ case 1: /* alarm on */
+ ret = i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+ FM3130_RTC_CONTROL_BIT_AEN);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
static const struct rtc_class_ops fm3130_rtc_ops = {
.read_time = fm3130_get_time,
.set_time = fm3130_set_time,
.read_alarm = fm3130_read_alarm,
.set_alarm = fm3130_set_alarm,
+ .alarm_irq_enable = fm3130_alarm_irq_enable,
};
static struct i2c_driver fm3130_driver;
fm3130->msg[3].len = FM3130_ALARM_REGS;
fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+ fm3130->alarm_valid = 0;
fm3130->data_valid = 0;
tmp = i2c_transfer(adapter, fm3130->msg, 4);
fm3130->regs[FM3130_CAL_CONTROL] =
i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
- /* Checking for alarm */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
- fm3130->alarm = 1;
- fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
- }
-
/* Disabling calibration mode */
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_CAL_CONTROL] &
~(FM3130_CAL_CONTROL_BIT_nOSCEN));
- /* oscillator fault? clear flag, and warn */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+ /* low battery? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) {
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_LB));
dev_warn(&client->dev, "Low battery!\n");
+ }
- /* oscillator fault? clear flag, and warn */
+ /* check if Power On Reset bit is set */
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_RTC_CONTROL] &
~FM3130_RTC_CONTROL_BIT_POR);
- dev_warn(&client->dev, "SET TIME!\n");
+ dev_dbg(&client->dev, "POR bit is set\n");
}
/* ACS is controlled by alarm */
i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
- /* TODO */
- /* TODO need to sanity check alarm */
- tmp = fm3130->regs[FM3130_RTC_SECONDS];
- tmp = bcd2bin(tmp & 0x7f);
- if (tmp > 60)
- goto exit_bad;
+ /* alarm registers sanity check */
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ if (tmp > 59)
+ goto bad_alarm;
+
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
- if (tmp > 60)
- goto exit_bad;
+ if (tmp > 59)
+ goto bad_alarm;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+ if (tmp > 23)
+ goto bad_alarm;
tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
if (tmp == 0 || tmp > 31)
- goto exit_bad;
+ goto bad_alarm;
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
if (tmp == 0 || tmp > 12)
- goto exit_bad;
+ goto bad_alarm;
- tmp = fm3130->regs[FM3130_RTC_HOURS];
+ fm3130->alarm_valid = 1;
+
+bad_alarm:
+
+ /* clock registers sanity chek */
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ if (tmp > 59)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ if (tmp > 59)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+ if (tmp > 23)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7);
+ if (tmp == 0 || tmp > 7)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ if (tmp == 0 || tmp > 31)
+ goto bad_clock;
+
+ tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+ if (tmp == 0 || tmp > 12)
+ goto bad_clock;
fm3130->data_valid = 1;
-exit_bad:
- if (!fm3130->data_valid)
+bad_clock:
+
+ if (!fm3130->data_valid || !fm3130->alarm_valid)
dev_dbg(&client->dev,
"%s: %02x %02x %02x %02x %02x %02x %02x %02x"
"%02x %02x %02x %02x %02x %02x %02x\n",
git.openpandora.org / pandora-kernel.git / blobdiff