#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
}
}
+ if (rdev->constraints->ramp_delay && ops->set_ramp_delay) {
+ ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
+ if (ret < 0) {
+ rdev_err(rdev, "failed to set ramp_delay\n");
+ goto out;
+ }
+ }
+
print_constraints(rdev);
return 0;
out:
static int _regulator_get_enable_time(struct regulator_dev *rdev)
{
if (!rdev->desc->ops->enable_time)
- return 0;
+ return rdev->desc->enable_time;
return rdev->desc->ops->enable_time(rdev);
}
}
EXPORT_SYMBOL_GPL(devm_regulator_put);
+static int _regulator_do_enable(struct regulator_dev *rdev)
+{
+ int ret, delay;
+
+ /* Query before enabling in case configuration dependent. */
+ ret = _regulator_get_enable_time(rdev);
+ if (ret >= 0) {
+ delay = ret;
+ } else {
+ rdev_warn(rdev, "enable_time() failed: %d\n", ret);
+ delay = 0;
+ }
+
+ trace_regulator_enable(rdev_get_name(rdev));
+
+ if (rdev->ena_gpio) {
+ gpio_set_value_cansleep(rdev->ena_gpio,
+ !rdev->ena_gpio_invert);
+ rdev->ena_gpio_state = 1;
+ } else if (rdev->desc->ops->enable) {
+ ret = rdev->desc->ops->enable(rdev);
+ if (ret < 0)
+ return ret;
+ } else {
+ return -EINVAL;
+ }
+
+ /* Allow the regulator to ramp; it would be useful to extend
+ * this for bulk operations so that the regulators can ramp
+ * together. */
+ trace_regulator_enable_delay(rdev_get_name(rdev));
+
+ if (delay >= 1000) {
+ mdelay(delay / 1000);
+ udelay(delay % 1000);
+ } else if (delay) {
+ udelay(delay);
+ }
+
+ trace_regulator_enable_complete(rdev_get_name(rdev));
+
+ return 0;
+}
+
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
- int ret, delay;
+ int ret;
/* check voltage and requested load before enabling */
if (rdev->constraints &&
if (!_regulator_can_change_status(rdev))
return -EPERM;
- if (!rdev->desc->ops->enable)
- return -EINVAL;
-
- /* Query before enabling in case configuration
- * dependent. */
- ret = _regulator_get_enable_time(rdev);
- if (ret >= 0) {
- delay = ret;
- } else {
- rdev_warn(rdev, "enable_time() failed: %d\n",
- ret);
- delay = 0;
- }
-
- trace_regulator_enable(rdev_get_name(rdev));
-
- /* Allow the regulator to ramp; it would be useful
- * to extend this for bulk operations so that the
- * regulators can ramp together. */
- ret = rdev->desc->ops->enable(rdev);
+ ret = _regulator_do_enable(rdev);
if (ret < 0)
return ret;
- trace_regulator_enable_delay(rdev_get_name(rdev));
-
- if (delay >= 1000) {
- mdelay(delay / 1000);
- udelay(delay % 1000);
- } else if (delay) {
- udelay(delay);
- }
-
- trace_regulator_enable_complete(rdev_get_name(rdev));
-
} else if (ret < 0) {
rdev_err(rdev, "is_enabled() failed: %d\n", ret);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_enable);
+static int _regulator_do_disable(struct regulator_dev *rdev)
+{
+ int ret;
+
+ trace_regulator_disable(rdev_get_name(rdev));
+
+ if (rdev->ena_gpio) {
+ gpio_set_value_cansleep(rdev->ena_gpio,
+ rdev->ena_gpio_invert);
+ rdev->ena_gpio_state = 0;
+
+ } else if (rdev->desc->ops->disable) {
+ ret = rdev->desc->ops->disable(rdev);
+ if (ret != 0)
+ return ret;
+ }
+
+ trace_regulator_disable_complete(rdev_get_name(rdev));
+
+ _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
+ NULL);
+ return 0;
+}
+
/* locks held by regulator_disable() */
static int _regulator_disable(struct regulator_dev *rdev)
{
(rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
- if (_regulator_can_change_status(rdev) &&
- rdev->desc->ops->disable) {
- trace_regulator_disable(rdev_get_name(rdev));
-
- ret = rdev->desc->ops->disable(rdev);
+ if (_regulator_can_change_status(rdev)) {
+ ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
return ret;
}
-
- trace_regulator_disable_complete(rdev_get_name(rdev));
-
- _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
- NULL);
}
rdev->use_count = 0;
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
+ /* A GPIO control always takes precedence */
+ if (rdev->ena_gpio)
+ return rdev->ena_gpio_state;
+
/* If we don't know then assume that the regulator is always on */
if (!rdev->desc->ops->is_enabled)
return 1;
{
int ret, voltage;
+ /* Allow uV_step to be 0 for fixed voltage */
+ if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
+ if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
if (!rdev->desc->uV_step) {
BUG_ON(!rdev->desc->uV_step);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
+/**
+ *regulator_set_voltage_time_sel - get raise/fall time
+ * @regulator: regulator source
+ * @old_selector: selector for starting voltage
+ * @new_selector: selector for target voltage
+ *
+ * Provided with the starting and target voltage selectors, this function
+ * returns time in microseconds required to rise or fall to this new voltage
+ *
+ * Drivers providing ramp_delay in regulation_constraints can use this as their
+ * set_voltage_time_sel() operation.
+ */
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ unsigned int ramp_delay = 0;
+ int old_volt, new_volt;
+
+ if (rdev->constraints->ramp_delay)
+ ramp_delay = rdev->constraints->ramp_delay;
+ else if (rdev->desc->ramp_delay)
+ ramp_delay = rdev->desc->ramp_delay;
+
+ if (ramp_delay == 0) {
+ rdev_warn(rdev, "ramp_delay not set\n");
+ return 0;
+ }
+
+ /* sanity check */
+ if (!rdev->desc->ops->list_voltage)
+ return -EINVAL;
+
+ old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
+ new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
+
+ return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
+
/**
* regulator_sync_voltage - re-apply last regulator output voltage
* @regulator: regulator source
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
- int ret, output_uV, input_uV, total_uA_load = 0;
+ int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+
mutex_lock(&rdev->mutex);
/*
goto out;
}
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ /* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
dev_set_drvdata(&rdev->dev, rdev);
+ if (config->ena_gpio) {
+ ret = gpio_request_one(config->ena_gpio,
+ GPIOF_DIR_OUT | config->ena_gpio_flags,
+ rdev_get_name(rdev));
+ if (ret != 0) {
+ rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
+ config->ena_gpio, ret);
+ goto clean;
+ }
+
+ rdev->ena_gpio = config->ena_gpio;
+ rdev->ena_gpio_invert = config->ena_gpio_invert;
+
+ if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH)
+ rdev->ena_gpio_state = 1;
+
+ if (rdev->ena_gpio_invert)
+ rdev->ena_gpio_state = !rdev->ena_gpio_state;
+ }
+
/* set regulator constraints */
if (init_data)
constraints = &init_data->constraints;
scrub:
if (rdev->supply)
regulator_put(rdev->supply);
+ if (rdev->ena_gpio)
+ gpio_free(rdev->ena_gpio);
kfree(rdev->constraints);
device_unregister(&rdev->dev);
/* device core frees rdev */
unset_regulator_supplies(rdev);
list_del(&rdev->list);
kfree(rdev->constraints);
+ if (rdev->ena_gpio)
+ gpio_free(rdev->ena_gpio);
device_unregister(&rdev->dev);
mutex_unlock(®ulator_list_mutex);
}
git.openpandora.org / pandora-kernel.git / blobdiff