* Sam Lin - GPS support
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define ASUS_HOTK_DEVICE_NAME "Hotkey"
-#define ASUS_HOTK_FILE "asus-laptop"
+#define ASUS_HOTK_FILE KBUILD_MODNAME
#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
+
/*
* Some events we use, same for all Asus
*/
* Flags for hotk status
* WL_ON and BT_ON are also used for wireless_status()
*/
-#define WL_ON 0x01 //internal Wifi
-#define BT_ON 0x02 //internal Bluetooth
-#define MLED_ON 0x04 //mail LED
-#define TLED_ON 0x08 //touchpad LED
-#define RLED_ON 0x10 //Record LED
-#define PLED_ON 0x20 //Phone LED
-#define GLED_ON 0x40 //Gaming LED
-#define LCD_ON 0x80 //LCD backlight
-#define GPS_ON 0x100 //GPS
+#define WL_ON 0x01 /* internal Wifi */
+#define BT_ON 0x02 /* internal Bluetooth */
+#define MLED_ON 0x04 /* mail LED */
+#define TLED_ON 0x08 /* touchpad LED */
+#define RLED_ON 0x10 /* Record LED */
+#define PLED_ON 0x20 /* Phone LED */
+#define GLED_ON 0x40 /* Gaming LED */
+#define LCD_ON 0x80 /* LCD backlight */
+#define GPS_ON 0x100 /* GPS */
+#define KEY_ON 0x200 /* Keyboard backlight */
#define ASUS_LOG ASUS_HOTK_FILE ": "
#define ASUS_ERR KERN_ERR ASUS_LOG
MODULE_DESCRIPTION(ASUS_HOTK_NAME);
MODULE_LICENSE("GPL");
-/* WAPF defines the behavior of the Fn+Fx wlan key
+/*
+ * WAPF defines the behavior of the Fn+Fx wlan key
* The significance of values is yet to be found, but
* most of the time:
* 0x0 will do nothing
/* LEDD */
ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
-/* Bluetooth and WLAN
+/*
+ * Bluetooth and WLAN
* WLED and BLED are not handled like other XLED, because in some dsdt
* they also control the WLAN/Bluetooth device.
*/
/* Display */
ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP");
-ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G
- M6A M6V VX-1 V6J V6V W3Z */
- "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
- S5A M5A z33A W1Jc W2V G1 */
- "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
- "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
- "\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */
- "\\_SB.PCI0.VGA.GETD", /* Z96F */
- "\\ACTD", /* A2D */
- "\\ADVG", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
- "\\DNXT", /* P30 */
- "\\INFB", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
- "\\SSTE"); /* A3F A6F A3N A3L M6N W3N W6A */
-
-ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
-ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
+ASUS_HANDLE(display_get,
+ /* A6B, A6K A6R A7D F3JM L4R M6R A3G M6A M6V VX-1 V6J V6V W3Z */
+ "\\_SB.PCI0.P0P1.VGA.GETD",
+ /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V S5A M5A z33A W1Jc W2V G1 */
+ "\\_SB.PCI0.P0P2.VGA.GETD",
+ /* A6V A6Q */
+ "\\_SB.PCI0.P0P3.VGA.GETD",
+ /* A6T, A6M */
+ "\\_SB.PCI0.P0PA.VGA.GETD",
+ /* L3C */
+ "\\_SB.PCI0.PCI1.VGAC.NMAP",
+ /* Z96F */
+ "\\_SB.PCI0.VGA.GETD",
+ /* A2D */
+ "\\ACTD",
+ /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
+ "\\ADVG",
+ /* P30 */
+ "\\DNXT",
+ /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
+ "\\INFB",
+ /* A3F A6F A3N A3L M6N W3N W6A */
+ "\\SSTE");
+
+ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
+ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
/* GPS */
/* R2H use different handle for GPS on/off */
ASUS_HANDLE(gps_off, ASUS_HOTK_PREFIX "SDOF"); /* R2H */
ASUS_HANDLE(gps_status, ASUS_HOTK_PREFIX "GPST");
+/* Keyboard light */
+ASUS_HANDLE(kled_set, ASUS_HOTK_PREFIX "SLKB");
+ASUS_HANDLE(kled_get, ASUS_HOTK_PREFIX "GLKB");
+
/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
*/
struct asus_hotk {
- char *name; //laptop name
- struct acpi_device *device; //the device we are in
- acpi_handle handle; //the handle of the hotk device
- char status; //status of the hotk, for LEDs, ...
- u32 ledd_status; //status of the LED display
- u8 light_level; //light sensor level
- u8 light_switch; //light sensor switch value
- u16 event_count[128]; //count for each event TODO make this better
+ char *name; /* laptop name */
+ struct acpi_device *device; /* the device we are in */
+ acpi_handle handle; /* the handle of the hotk device */
+ char status; /* status of the hotk, for LEDs, ... */
+ u32 ledd_status; /* status of the LED display */
+ u8 light_level; /* light sensor level */
+ u8 light_switch; /* light sensor switch value */
+ u16 event_count[128]; /* count for each event TODO make this better */
struct input_dev *inputdev;
u16 *keycode_map;
};
.update_status = update_bl_status,
};
-/* These functions actually update the LED's, and are called from a
+/*
+ * These functions actually update the LED's, and are called from a
* workqueue. By doing this as separate work rather than when the LED
* subsystem asks, we avoid messing with the Asus ACPI stuff during a
- * potentially bad time, such as a timer interrupt. */
+ * potentially bad time, such as a timer interrupt.
+ */
static struct workqueue_struct *led_workqueue;
-#define ASUS_LED(object, ledname) \
+#define ASUS_LED(object, ledname, max) \
static void object##_led_set(struct led_classdev *led_cdev, \
enum led_brightness value); \
+ static enum led_brightness object##_led_get( \
+ struct led_classdev *led_cdev); \
static void object##_led_update(struct work_struct *ignored); \
static int object##_led_wk; \
static DECLARE_WORK(object##_led_work, object##_led_update); \
static struct led_classdev object##_led = { \
.name = "asus::" ledname, \
.brightness_set = object##_led_set, \
+ .brightness_get = object##_led_get, \
+ .max_brightness = max \
}
-ASUS_LED(mled, "mail");
-ASUS_LED(tled, "touchpad");
-ASUS_LED(rled, "record");
-ASUS_LED(pled, "phone");
-ASUS_LED(gled, "gaming");
+ASUS_LED(mled, "mail", 1);
+ASUS_LED(tled, "touchpad", 1);
+ASUS_LED(rled, "record", 1);
+ASUS_LED(pled, "phone", 1);
+ASUS_LED(gled, "gaming", 1);
+ASUS_LED(kled, "kbd_backlight", 3);
struct key_entry {
char type;
{KE_KEY, 0x41, KEY_NEXTSONG},
{KE_KEY, 0x43, KEY_STOPCD},
{KE_KEY, 0x45, KEY_PLAYPAUSE},
+ {KE_KEY, 0x4c, KEY_MEDIA},
{KE_KEY, 0x50, KEY_EMAIL},
{KE_KEY, 0x51, KEY_WWW},
+ {KE_KEY, 0x55, KEY_CALC},
{KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */
{KE_KEY, 0x5D, KEY_WLAN},
+ {KE_KEY, 0x5E, KEY_WLAN},
+ {KE_KEY, 0x5F, KEY_WLAN},
+ {KE_KEY, 0x60, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
{KE_KEY, 0x82, KEY_CAMERA},
{KE_KEY, 0x8A, KEY_PROG1},
{KE_KEY, 0x95, KEY_MEDIA},
{KE_KEY, 0x99, KEY_PHONE},
+ {KE_KEY, 0xc4, KEY_KBDILLUMUP},
+ {KE_KEY, 0xc5, KEY_KBDILLUMDOWN},
{KE_END, 0},
};
static int write_acpi_int(acpi_handle handle, const char *method, int val,
struct acpi_buffer *output)
{
- struct acpi_object_list params; //list of input parameters (an int here)
- union acpi_object in_obj; //the only param we use
+ struct acpi_object_list params; /* list of input parameters (an int) */
+ union acpi_object in_obj; /* the only param we use */
acpi_status status;
if (!handle)
rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading Wireless status\n");
+ pr_warning("Error reading Wireless status\n");
else
return (status & mask) ? 1 : 0;
rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading GPS status\n");
+ pr_warning("Error reading GPS status\n");
else
return status ? 1 : 0;
}
if (write_acpi_int(handle, NULL, out, NULL))
- printk(ASUS_WARNING " write failed %x\n", mask);
+ pr_warning(" write failed %x\n", mask);
}
/* /sys/class/led handlers */
{ \
int value = object##_led_wk; \
write_status(object##_set_handle, value, (mask)); \
+ } \
+ static enum led_brightness object##_led_get( \
+ struct led_classdev *led_cdev) \
+ { \
+ return led_cdev->brightness; \
}
ASUS_LED_HANDLER(mled, MLED_ON);
ASUS_LED_HANDLER(tled, TLED_ON);
ASUS_LED_HANDLER(gled, GLED_ON);
+/*
+ * Keyboard backlight
+ */
+static int get_kled_lvl(void)
+{
+ unsigned long long kblv;
+ struct acpi_object_list params;
+ union acpi_object in_obj;
+ acpi_status rv;
+
+ params.count = 1;
+ params.pointer = &in_obj;
+ in_obj.type = ACPI_TYPE_INTEGER;
+ in_obj.integer.value = 2;
+
+ rv = acpi_evaluate_integer(kled_get_handle, NULL, ¶ms, &kblv);
+ if (ACPI_FAILURE(rv)) {
+ pr_warning("Error reading kled level\n");
+ return 0;
+ }
+ return kblv;
+}
+
+static int set_kled_lvl(int kblv)
+{
+ if (kblv > 0)
+ kblv = (1 << 7) | (kblv & 0x7F);
+ else
+ kblv = 0;
+
+ if (write_acpi_int(kled_set_handle, NULL, kblv, NULL)) {
+ pr_warning("Keyboard LED display write failed\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void kled_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ kled_led_wk = value;
+ queue_work(led_workqueue, &kled_led_work);
+}
+
+static void kled_led_update(struct work_struct *ignored)
+{
+ set_kled_lvl(kled_led_wk);
+}
+
+static enum led_brightness kled_led_get(struct led_classdev *led_cdev)
+{
+ return get_kled_lvl();
+}
+
static int get_lcd_state(void)
{
return read_status(LCD_ON);
NULL, NULL, NULL);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error switching LCD\n");
+ pr_warning("Error switching LCD\n");
}
write_status(NULL, lcd, LCD_ON);
rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading brightness\n");
+ pr_warning("Error reading brightness\n");
return value;
}
/* 0 <= value <= 15 */
if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
- printk(ASUS_WARNING "Error changing brightness\n");
+ pr_warning("Error changing brightness\n");
ret = -EIO;
}
{
int len = 0;
unsigned long long temp;
- char buf[16]; //enough for all info
+ char buf[16]; /* enough for all info */
acpi_status rv = AE_OK;
/*
*/
rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "SFUN value : 0x%04x\n",
+ len += sprintf(page + len, "SFUN value : %#x\n",
+ (uint) temp);
+ /*
+ * The HWRS method return informations about the hardware.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * The significance of others is yet to be found.
+ * If we don't find the method, we assume the device are present.
+ */
+ rv = acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &temp);
+ if (!ACPI_FAILURE(rv))
+ len += sprintf(page + len, "HRWS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
*/
rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "ASYM value : 0x%04x\n",
+ len += sprintf(page + len, "ASYM value : %#x\n",
(uint) temp);
if (asus_info) {
snprintf(buf, 16, "%d", asus_info->length);
rv = parse_arg(buf, count, &value);
if (rv > 0) {
if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "LED display write failed\n");
+ pr_warning("LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
{
/* no sanity check needed for now */
if (write_acpi_int(display_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting display\n");
+ pr_warning("Error setting display\n");
return;
}
unsigned long long value = 0;
acpi_status rv = AE_OK;
- /* In most of the case, we know how to set the display, but sometime
- we can't read it */
+ /*
+ * In most of the case, we know how to set the display, but sometime
+ * we can't read it
+ */
if (display_get_handle) {
rv = acpi_evaluate_integer(display_get_handle, NULL,
NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading display status\n");
+ pr_warning("Error reading display status\n");
}
value &= 0x0F; /* needed for some models, shouldn't hurt others */
static void set_light_sens_switch(int value)
{
if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor switch\n");
+ pr_warning("Error setting light sensor switch\n");
hotk->light_switch = value;
}
static void set_light_sens_level(int value)
{
if (write_acpi_int(ls_level_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor level\n");
+ pr_warning("Error setting light sensor level\n");
hotk->light_level = value;
}
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+ pr_warning("Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
- printk(ASUS_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
}
status =
acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error calling BSTS\n");
+ pr_warning("Error calling BSTS\n");
else if (bsts_result)
- printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+ pr_notice("BSTS called, 0x%02x returned\n",
(uint) bsts_result);
/* This too ... */
return -ENOMEM;
if (*string)
- printk(ASUS_NOTICE " %s model detected\n", string);
+ pr_notice(" %s model detected\n", string);
ASUS_HANDLE_INIT(mled_set);
ASUS_HANDLE_INIT(tled_set);
ASUS_HANDLE_INIT(ledd_set);
+ ASUS_HANDLE_INIT(kled_set);
+ ASUS_HANDLE_INIT(kled_get);
+
/*
* The HWRS method return informations about the hardware.
* 0x80 bit is for WLAN, 0x100 for Bluetooth.
ASUS_HANDLE_INIT(display_set);
ASUS_HANDLE_INIT(display_get);
- /* There is a lot of models with "ALSL", but a few get
- a real light sens, so we need to check it. */
+ /*
+ * There is a lot of models with "ALSL", but a few get
+ * a real light sens, so we need to check it.
+ */
if (!ASUS_HANDLE_INIT(ls_switch))
ASUS_HANDLE_INIT(ls_level);
hotk->inputdev = input_allocate_device();
if (!hotk->inputdev) {
- printk(ASUS_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
hotk->inputdev->name = "Asus Laptop extra buttons";
}
result = input_register_device(hotk->inputdev);
if (result) {
- printk(ASUS_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(hotk->inputdev);
}
return result;
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
- printk(ASUS_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
if (!device)
return -EINVAL;
- printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+ pr_notice("Asus Laptop Support version %s\n",
ASUS_LAPTOP_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
/* LCD Backlight is on by default */
write_status(NULL, 1, LCD_ON);
+ /* Keyboard Backlight is on by default */
+ if (kled_set_handle)
+ set_kled_lvl(1);
+
/* LED display is off by default */
hotk->ledd_status = 0xFFF;
ASUS_LED_UNREGISTER(pled);
ASUS_LED_UNREGISTER(rled);
ASUS_LED_UNREGISTER(gled);
+ ASUS_LED_UNREGISTER(kled);
}
static void asus_input_exit(void)
bd = backlight_device_register(ASUS_HOTK_FILE, dev,
NULL, &asusbl_ops);
if (IS_ERR(bd)) {
- printk(ASUS_ERR
- "Could not register asus backlight device\n");
+ pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
return PTR_ERR(bd);
}
if (rv)
goto out4;
+ if (kled_set_handle && kled_get_handle)
+ rv = ASUS_LED_REGISTER(kled, dev);
+ if (rv)
+ goto out5;
+
led_workqueue = create_singlethread_workqueue("led_workqueue");
if (!led_workqueue)
- goto out5;
+ goto out6;
return 0;
-out5:
+out6:
rv = -ENOMEM;
+ ASUS_LED_UNREGISTER(kled);
+out5:
ASUS_LED_UNREGISTER(gled);
out4:
ASUS_LED_UNREGISTER(pled);
static int __init asus_laptop_init(void)
{
- struct device *dev;
int result;
if (acpi_disabled)
return -ENODEV;
}
- dev = acpi_get_physical_device(hotk->device->handle);
-
- if (!acpi_video_backlight_support()) {
- result = asus_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(ASUS_INFO "Brightness ignored, must be controlled by "
- "ACPI video driver\n");
-
result = asus_input_init();
if (result)
goto fail_input;
- result = asus_led_init(dev);
- if (result)
- goto fail_led;
-
/* Register platform stuff */
result = platform_driver_register(&asuspf_driver);
if (result)
if (result)
goto fail_sysfs;
+ result = asus_led_init(&asuspf_device->dev);
+ if (result)
+ goto fail_led;
+
+ if (!acpi_video_backlight_support()) {
+ result = asus_backlight_init(&asuspf_device->dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Brightness ignored, must be controlled by "
+ "ACPI video driver\n");
+
return 0;
+fail_backlight:
+ asus_led_exit();
+
+fail_led:
+ sysfs_remove_group(&asuspf_device->dev.kobj,
+ &asuspf_attribute_group);
+
fail_sysfs:
platform_device_del(asuspf_device);
platform_driver_unregister(&asuspf_driver);
fail_platform_driver:
- asus_led_exit();
-
-fail_led:
asus_input_exit();
fail_input:
- asus_backlight_exit();
-
-fail_backlight:
return result;
}
git.openpandora.org / pandora-kernel.git / blobdiff