* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ * (C) Copyright 2006 Helge Deller <deller@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
#define DBG_INIT(x...)
#endif
+#define SUPERIO "SuperIO"
+#define PFX SUPERIO ": "
+
static irqreturn_t
superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
{
local_irq = results & 0x0f;
if (local_irq == 2 || local_irq > 7) {
- printk(KERN_ERR "SuperIO: slave interrupted!\n");
+ printk(KERN_ERR PFX "slave interrupted!\n");
return IRQ_HANDLED;
}
outb(OCW3_ISR,IC_PIC1+0);
results = inb(IC_PIC1+0);
if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
- printk(KERN_WARNING "SuperIO: spurious interrupt!\n");
+ printk(KERN_WARNING PFX "spurious interrupt!\n");
return IRQ_HANDLED;
}
}
struct pci_dev *pdev = sio->lio_pdev;
u16 word;
- if (sio->suckyio_irq_enabled)
+ if (sio->suckyio_irq_enabled)
return;
- if (!pdev) BUG();
- if (!sio->usb_pdev) BUG();
+ BUG_ON(!pdev);
+ BUG_ON(!sio->usb_pdev);
/* use the IRQ iosapic found for USB INT D... */
pdev->irq = sio->usb_pdev->irq;
/* ...then properly fixup the USB to point at suckyio PIC */
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
- printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+ printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
pci_name(pdev), pdev->irq);
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
sio->sp1_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base);
+ printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
sio->sp2_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 2 at 0x%x\n", sio->sp2_base);
+ printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
sio->pp_base &= ~1;
- printk (KERN_INFO "SuperIO: Parallel port at 0x%x\n", sio->pp_base);
+ printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
sio->fdc_base &= ~1;
- printk (KERN_INFO "SuperIO: Floppy controller at 0x%x\n", sio->fdc_base);
+ printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
sio->acpi_base &= ~1;
- printk (KERN_INFO "SuperIO: ACPI at 0x%x\n", sio->acpi_base);
+ printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
request_region (IC_PIC1, 0x1f, "pic1");
request_region (IC_PIC2, 0x1f, "pic2");
request_region (sio->acpi_base, 0x1f, "acpi");
/* Enable the legacy I/O function */
- pci_read_config_word (pdev, PCI_COMMAND, &word);
+ pci_read_config_word (pdev, PCI_COMMAND, &word);
word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
pci_write_config_word (pdev, PCI_COMMAND, word);
/* Setup USB power regulation */
outb(1, sio->acpi_base + USB_REG_CR);
if (inb(sio->acpi_base + USB_REG_CR) & 1)
- printk(KERN_INFO "SuperIO: USB regulator enabled\n");
+ printk(KERN_INFO PFX "USB regulator enabled\n");
else
- printk(KERN_ERR "USB regulator not initialized!\n");
+ printk(KERN_ERR PFX "USB regulator not initialized!\n");
if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
- "SuperIO", (void *)sio)) {
+ SUPERIO, (void *)sio)) {
- printk(KERN_ERR "SuperIO: could not get irq\n");
+ printk(KERN_ERR PFX "could not get irq\n");
BUG();
return;
}
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number.\n");
+ printk(KERN_ERR PFX "Illegal irq number.\n");
BUG();
return;
}
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number (%d).\n", irq);
+ printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
BUG();
return;
}
}
static struct hw_interrupt_type superio_interrupt_type = {
- .typename = "SuperIO",
+ .typename = SUPERIO,
.startup = superio_startup_irq,
.shutdown = superio_disable_irq,
.enable = superio_enable_irq,
return local_irq;
}
-static struct uart_port serial[] = {
- {
- .iotype = UPIO_PORT,
- .line = 0,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- },
- {
- .iotype = UPIO_PORT,
- .line = 1,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- }
-};
-
static void __devinit superio_serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
int retval;
-
- serial[0].iobase = sio_dev.sp1_base;
- serial[0].irq = SP1_IRQ;
- spin_lock_init(&serial[0].lock);
-
- retval = early_serial_setup(&serial[0]);
+ struct uart_port serial_port;
+
+ memset(&serial_port, 0, sizeof(serial_port));
+ serial_port.iotype = UPIO_PORT;
+ serial_port.type = PORT_16550A;
+ serial_port.uartclk = 115200*16;
+ serial_port.fifosize = 16;
+ spin_lock_init(&serial_port.lock);
+
+ /* serial port #1 */
+ serial_port.iobase = sio_dev.sp1_base;
+ serial_port.irq = SP1_IRQ;
+ serial_port.line = 0;
+ retval = early_serial_setup(&serial_port);
if (retval < 0) {
- printk(KERN_WARNING "SuperIO: Register Serial #0 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
- serial[1].iobase = sio_dev.sp2_base;
- serial[1].irq = SP2_IRQ;
- spin_lock_init(&serial[1].lock);
- retval = early_serial_setup(&serial[1]);
-
+ /* serial port #2 */
+ serial_port.iobase = sio_dev.sp2_base;
+ serial_port.irq = SP2_IRQ;
+ serial_port.line = 1;
+ retval = early_serial_setup(&serial_port);
if (retval < 0)
- printk(KERN_WARNING "SuperIO: Register Serial #1 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
}
PARPORT_DMA_NONE /* dma */,
NULL /*struct pci_dev* */) )
- printk(KERN_WARNING "SuperIO: Probing parallel port failed.\n");
+ printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
}
dev->subsystem_vendor, dev->subsystem_device,
dev->class);
- if (!sio->suckyio_irq_enabled)
- BUG(); /* Enabled by PCI_FIXUP_FINAL */
+ BUG_ON(!sio->suckyio_irq_enabled); /* Enabled by PCI_FIXUP_FINAL */
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
superio_parport_init();
};
static struct pci_driver superio_driver = {
- .name = "SuperIO",
+ .name = SUPERIO,
.id_table = superio_tbl,
.probe = superio_probe,
};
git.openpandora.org / pandora-kernel.git / blobdiff