+++ /dev/null
-/*
- * WaveLAN ISA driver
- *
- * Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- *
- * This file contains all definitions and declarations necessary for the
- * WaveLAN ISA driver. This file is a private header, so it should
- * be included only in wavelan.c!
- */
-
-#ifndef WAVELAN_P_H
-#define WAVELAN_P_H
-
-/************************** DOCUMENTATION ***************************/
-/*
- * This driver provides a Linux interface to the WaveLAN ISA hardware.
- * The WaveLAN is a product of Lucent (http://www.wavelan.com/).
- * This division was formerly part of NCR and then AT&T.
- * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean.
- *
- * To learn how to use this driver, read the NET3 HOWTO.
- * If you want to exploit the many other functionalities, read the comments
- * in the code.
- *
- * This driver is the result of the effort of many people (see below).
- */
-
-/* ------------------------ SPECIFIC NOTES ------------------------ */
-/*
- * Web page
- * --------
- * I try to maintain a web page with the Wireless LAN Howto at :
- * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
- *
- * SMP
- * ---
- * We now are SMP compliant (I eventually fixed the remaining bugs).
- * The driver has been tested on a dual P6-150 and survived my usual
- * set of torture tests.
- * Anyway, I spent enough time chasing interrupt re-entrancy during
- * errors or reconfigure, and I designed the locked/unlocked sections
- * of the driver with great care, and with the recent addition of
- * the spinlock (thanks to the new API), we should be quite close to
- * the truth.
- * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
- * but better safe than sorry (especially at 2 Mb/s ;-).
- *
- * I have also looked into disabling only our interrupt on the card
- * (via HACR) instead of all interrupts in the processor (via cli),
- * so that other driver are not impacted, and it look like it's
- * possible, but it's very tricky to do right (full of races). As
- * the gain would be mostly for SMP systems, it can wait...
- *
- * Debugging and options
- * ---------------------
- * You will find below a set of '#define" allowing a very fine control
- * on the driver behaviour and the debug messages printed.
- * The main options are :
- * o SET_PSA_CRC, to have your card correctly recognised by
- * an access point and the Point-to-Point diagnostic tool.
- * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
- * (otherwise we always start afresh with some defaults)
- *
- * wavelan.o is too darned big
- * ---------------------------
- * That's true! There is a very simple way to reduce the driver
- * object by 33%! Comment out the following line:
- * #include <linux/wireless.h>
- * Other compile options can also reduce the size of it...
- *
- * MAC address and hardware detection:
- * -----------------------------------
- * The detection code for the WaveLAN checks that the first three
- * octets of the MAC address fit the company code. This type of
- * detection works well for AT&T cards (because the AT&T code is
- * hardcoded in wavelan.h), but of course will fail for other
- * manufacturers.
- *
- * If you are sure that your card is derived from the WaveLAN,
- * here is the way to configure it:
- * 1) Get your MAC address
- * a) With your card utilities (wfreqsel, instconf, etc.)
- * b) With the driver:
- * o compile the kernel with DEBUG_CONFIG_INFO enabled
- * o Boot and look the card messages
- * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
- * 3) Compile and verify
- * 4) Send me the MAC code. I will include it in the next version.
- *
- */
-
-/* --------------------- WIRELESS EXTENSIONS --------------------- */
-/*
- * This driver is the first to support "wireless extensions".
- * This set of extensions provides a standard way to control the wireless
- * characteristics of the hardware. Applications such as mobile IP may
- * take advantage of it.
- *
- * It might be a good idea as well to fetch the wireless tools to
- * configure the device and play a bit.
- */
-
-/* ---------------------------- FILES ---------------------------- */
-/*
- * wavelan.c: actual code for the driver: C functions
- *
- * wavelan.p.h: private header: local types and variables for driver
- *
- * wavelan.h: description of the hardware interface and structs
- *
- * i82586.h: description of the Ethernet controller
- */
-
-/* --------------------------- HISTORY --------------------------- */
-/*
- * This is based on information in the drivers' headers. It may not be
- * accurate, and I guarantee only my best effort.
- *
- * The history of the WaveLAN drivers is as complicated as the history of
- * the WaveLAN itself (NCR -> AT&T -> Lucent).
- *
- * It all started with Anders Klemets <klemets@paul.rutgers.edu>
- * writing a WaveLAN ISA driver for the Mach microkernel. Girish
- * Welling <welling@paul.rutgers.edu> had also worked on it.
- * Keith Moore modified this for the PCMCIA hardware.
- *
- * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI
- * and added specific PCMCIA support (there is currently no equivalent
- * of the PCMCIA package under BSD).
- *
- * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD.
- *
- * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux.
- *
- * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver
- * (with help of the BSDI PCMCIA driver) for PCMCIA.
- * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work.
- * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
- * 2.00 cards correctly (2.4 GHz with frequency selection).
- * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
- * PCMCIA package (and bug corrections).
- *
- * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
- * patches to the PCMCIA driver. Later, I added code in the ISA driver
- * for Wireless Extensions and full support of frequency selection
- * cards. Then, I did the same to the PCMCIA driver, and did some
- * reorganisation. Finally, I came back to the ISA driver to
- * upgrade it at the same level as the PCMCIA one and reorganise
- * the code.
- * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
- * much needed information on the WaveLAN hardware.
- */
-
-/* The original copyrights and literature mention others' names and
- * credits. I don't know what their part in this development was.
- */
-
-/* By the way, for the copyright and legal stuff:
- * almost everybody wrote code under the GNU or BSD license (or similar),
- * and want their original copyright to remain somewhere in the
- * code (for myself, I go with the GPL).
- * Nobody wants to take responsibility for anything, except the fame.
- */
-
-/* --------------------------- CREDITS --------------------------- */
-/*
- * This software was developed as a component of the
- * Linux operating system.
- * It is based on other device drivers and information
- * either written or supplied by:
- * Ajay Bakre <bakre@paul.rutgers.edu>,
- * Donald Becker <becker@cesdis.gsfc.nasa.gov>,
- * Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>,
- * Brent Elphick <belphick@uwaterloo.ca>,
- * Anders Klemets <klemets@it.kth.se>,
- * Vladimir V. Kolpakov <w@stier.koenig.ru>,
- * Marc Meertens <Marc.Meertens@Utrecht.NCR.com>,
- * Pauline Middelink <middelin@polyware.iaf.nl>,
- * Robert Morris <rtm@das.harvard.edu>,
- * Jean Tourrilhes <jt@hpl.hp.com>,
- * Girish Welling <welling@paul.rutgers.edu>,
- * Clark Woodworth <clark@hiway1.exit109.com>
- * Yongguang Zhang <ygz@isl.hrl.hac.com>
- *
- * Thanks go also to:
- * James Ashton <jaa101@syseng.anu.edu.au>,
- * Alan Cox <alan@lxorguk.ukuu.org.uk>,
- * Allan Creighton <allanc@cs.usyd.edu.au>,
- * Matthew Geier <matthew@cs.usyd.edu.au>,
- * Remo di Giovanni <remo@cs.usyd.edu.au>,
- * Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>,
- * Vipul Gupta <vgupta@cs.binghamton.edu>,
- * Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>,
- * Tim Nicholson <tim@cs.usyd.edu.au>,
- * Ian Parkin <ian@cs.usyd.edu.au>,
- * John Rosenberg <johnr@cs.usyd.edu.au>,
- * George Rossi <george@phm.gov.au>,
- * Arthur Scott <arthur@cs.usyd.edu.au>,
- * Stanislav Sinyagin <stas@isf.ru>
- * and Peter Storey for their assistance and advice.
- *
- * Additional Credits:
- *
- * My development has been done initially under Debian 1.1 (Linux 2.0.x)
- * and now under Debian 2.2, initially with an HP Vectra XP/60, and now
- * an HP Vectra XP/90.
- *
- */
-
-/* ------------------------- IMPROVEMENTS ------------------------- */
-/*
- * I proudly present:
- *
- * Changes made in first pre-release:
- * ----------------------------------
- * - reorganisation of the code, function name change
- * - creation of private header (wavelan.p.h)
- * - reorganised debug messages
- * - more comments, history, etc.
- * - mmc_init: configure the PSA if not done
- * - mmc_init: correct default value of level threshold for PCMCIA
- * - mmc_init: 2.00 detection better code for 2.00 initialization
- * - better info at startup
- * - IRQ setting (note: this setting is permanent)
- * - watchdog: change strategy (and solve module removal problems)
- * - add wireless extensions (ioctl and get_wireless_stats)
- * get/set nwid/frequency on fly, info for /proc/net/wireless
- * - more wireless extensions: SETSPY and GETSPY
- * - make wireless extensions optional
- * - private ioctl to set/get quality and level threshold, histogram
- * - remove /proc/net/wavelan
- * - suppress useless stuff from lp (net_local)
- * - kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
- * - add message level (debug stuff in /var/adm/debug and errors not
- * displayed at console and still in /var/adm/messages)
- * - multi device support
- * - start fixing the probe (init code)
- * - more inlines
- * - man page
- * - many other minor details and cleanups
- *
- * Changes made in second pre-release:
- * -----------------------------------
- * - clean up init code (probe and module init)
- * - better multiple device support (module)
- * - name assignment (module)
- *
- * Changes made in third pre-release:
- * ----------------------------------
- * - be more conservative on timers
- * - preliminary support for multicast (I still lack some details)
- *
- * Changes made in fourth pre-release:
- * -----------------------------------
- * - multicast (revisited and finished)
- * - avoid reset in set_multicast_list (a really big hack)
- * if somebody could apply this code for other i82586 based drivers
- * - share onboard memory 75% RU and 25% CU (instead of 50/50)
- *
- * Changes made for release in 2.1.15:
- * -----------------------------------
- * - change the detection code for multi manufacturer code support
- *
- * Changes made for release in 2.1.17:
- * -----------------------------------
- * - update to wireless extensions changes
- * - silly bug in card initial configuration (psa_conf_status)
- *
- * Changes made for release in 2.1.27 & 2.0.30:
- * --------------------------------------------
- * - small bug in debug code (probably not the last one...)
- * - remove extern keyword for wavelan_probe()
- * - level threshold is now a standard wireless extension (version 4 !)
- * - modules parameters types (new module interface)
- *
- * Changes made for release in 2.1.36:
- * -----------------------------------
- * - byte count stats (courtesy of David Hinds)
- * - remove dev_tint stuff (courtesy of David Hinds)
- * - encryption setting from Brent Elphick (thanks a lot!)
- * - 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
- *
- * Other changes (not by me) :
- * -------------------------
- * - Spelling and gramar "rectification".
- *
- * Changes made for release in 2.0.37 & 2.2.2 :
- * ------------------------------------------
- * - Correct status in /proc/net/wireless
- * - Set PSA CRC to make PtP diagnostic tool happy (Bob Gray)
- * - Module init code don't fail if we found at least one card in
- * the address list (Karlis Peisenieks)
- * - Missing parenthesis (Christopher Peterson)
- * - Correct i82586 configuration parameters
- * - Encryption initialisation bug (Robert McCormack)
- * - New mac addresses detected in the probe
- * - Increase watchdog for busy environments
- *
- * Changes made for release in 2.0.38 & 2.2.7 :
- * ------------------------------------------
- * - Correct the reception logic to better report errors and avoid
- * sending bogus packet up the stack
- * - Delay RU config to avoid corrupting first received packet
- * - Change config completion code (to actually check something)
- * - Avoid reading out of bound in skbuf to transmit
- * - Rectify a lot of (useless) debugging code
- * - Change the way to `#ifdef SET_PSA_CRC'
- *
- * Changes made for release in 2.2.11 & 2.3.13 :
- * -------------------------------------------
- * - Change e-mail and web page addresses
- * - Watchdog timer is now correctly expressed in HZ, not in jiffies
- * - Add channel number to the list of frequencies in range
- * - Add the (short) list of bit-rates in range
- * - Developp a new sensitivity... (sens.value & sens.fixed)
- *
- * Changes made for release in 2.2.14 & 2.3.23 :
- * -------------------------------------------
- * - Fix check for root permission (break instead of exit)
- * - New nwid & encoding setting (Wireless Extension 9)
- *
- * Changes made for release in 2.3.49 :
- * ----------------------------------
- * - Indentation reformating (Alan)
- * - Update to new network API (softnet - 2.3.43) :
- * o replace dev->tbusy (Alan)
- * o replace dev->tstart (Alan)
- * o remove dev->interrupt (Alan)
- * o add SMP locking via spinlock in splxx (me)
- * o add spinlock in interrupt handler (me)
- * o use kernel watchdog instead of ours (me)
- * o increase watchdog timeout (kernel is more sensitive) (me)
- * o verify that all the changes make sense and work (me)
- * - Fixup a potential gotcha when reconfiguring and thighten a bit
- * the interactions with Tx queue.
- *
- * Changes made for release in 2.4.0 :
- * ---------------------------------
- * - Fix spinlock stupid bugs that I left in. The driver is now SMP
- * compliant and doesn't lockup at startup.
- *
- * Changes made for release in 2.5.2 :
- * ---------------------------------
- * - Use new driver API for Wireless Extensions :
- * o got rid of wavelan_ioctl()
- * o use a bunch of iw_handler instead
- *
- * Changes made for release in 2.5.35 :
- * ----------------------------------
- * - Set dev->trans_start to avoid filling the logs
- * - Handle better spurious/bogus interrupt
- * - Avoid deadlocks in mmc_out()/mmc_in()
- *
- * Wishes & dreams:
- * ----------------
- * - roaming (see Pcmcia driver)
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/stat.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/uaccess.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-
-#include <linux/wireless.h> /* Wireless extensions */
-#include <net/iw_handler.h> /* Wireless handlers */
-
-/* WaveLAN declarations */
-#include "i82586.h"
-#include "wavelan.h"
-
-/************************** DRIVER OPTIONS **************************/
-/*
- * `#define' or `#undef' the following constant to change the behaviour
- * of the driver...
- */
-#undef SET_PSA_CRC /* Calculate and set the CRC on PSA (slower) */
-#define USE_PSA_CONFIG /* Use info from the PSA. */
-#undef EEPROM_IS_PROTECTED /* doesn't seem to be necessary */
-#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */
-#undef SET_MAC_ADDRESS /* Experimental */
-
-/* Warning: this stuff will slow down the driver. */
-#define WIRELESS_SPY /* Enable spying addresses. */
-#undef HISTOGRAM /* Enable histogram of signal level. */
-
-/****************************** DEBUG ******************************/
-
-#undef DEBUG_MODULE_TRACE /* module insertion/removal */
-#undef DEBUG_CALLBACK_TRACE /* calls made by Linux */
-#undef DEBUG_INTERRUPT_TRACE /* calls to handler */
-#undef DEBUG_INTERRUPT_INFO /* type of interrupt and so on */
-#define DEBUG_INTERRUPT_ERROR /* problems */
-#undef DEBUG_CONFIG_TRACE /* Trace the config functions. */
-#undef DEBUG_CONFIG_INFO /* what's going on */
-#define DEBUG_CONFIG_ERROR /* errors on configuration */
-#undef DEBUG_TX_TRACE /* transmission calls */
-#undef DEBUG_TX_INFO /* header of the transmitted packet */
-#undef DEBUG_TX_FAIL /* Normal failure conditions */
-#define DEBUG_TX_ERROR /* Unexpected conditions */
-#undef DEBUG_RX_TRACE /* transmission calls */
-#undef DEBUG_RX_INFO /* header of the received packet */
-#undef DEBUG_RX_FAIL /* Normal failure conditions */
-#define DEBUG_RX_ERROR /* Unexpected conditions */
-
-#undef DEBUG_PACKET_DUMP /* Dump packet on the screen if defined to 32. */
-#undef DEBUG_IOCTL_TRACE /* misc. call by Linux */
-#undef DEBUG_IOCTL_INFO /* various debugging info */
-#define DEBUG_IOCTL_ERROR /* what's going wrong */
-#define DEBUG_BASIC_SHOW /* Show basic startup info. */
-#undef DEBUG_VERSION_SHOW /* Print version info. */
-#undef DEBUG_PSA_SHOW /* Dump PSA to screen. */
-#undef DEBUG_MMC_SHOW /* Dump mmc to screen. */
-#undef DEBUG_SHOW_UNUSED /* Show unused fields too. */
-#undef DEBUG_I82586_SHOW /* Show i82586 status. */
-#undef DEBUG_DEVICE_SHOW /* Show device parameters. */
-
-/************************ CONSTANTS & MACROS ************************/
-
-#ifdef DEBUG_VERSION_SHOW
-static const char *version = "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n";
-#endif
-
-/* Watchdog temporisation */
-#define WATCHDOG_JIFFIES (512*HZ/100)
-
-/* ------------------------ PRIVATE IOCTL ------------------------ */
-
-#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */
-#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */
-
-#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 2 /* Set histogram ranges */
-#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 3 /* Get histogram values */
-
-/****************************** TYPES ******************************/
-
-/* Shortcuts */
-typedef struct iw_statistics iw_stats;
-typedef struct iw_quality iw_qual;
-typedef struct iw_freq iw_freq;typedef struct net_local net_local;
-typedef struct timer_list timer_list;
-
-/* Basic types */
-typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */
-
-/*
- * Static specific data for the interface.
- *
- * For each network interface, Linux keeps data in two structures: "device"
- * keeps the generic data (same format for everybody) and "net_local" keeps
- * additional specific data.
- */
-struct net_local
-{
- net_local * next; /* linked list of the devices */
- struct net_device * dev; /* reverse link */
- spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
- int nresets; /* number of hardware resets */
- u_char reconfig_82586; /* We need to reconfigure the controller. */
- u_char promiscuous; /* promiscuous mode */
- int mc_count; /* number of multicast addresses */
- u_short hacr; /* current host interface state */
-
- int tx_n_in_use;
- u_short rx_head;
- u_short rx_last;
- u_short tx_first_free;
- u_short tx_first_in_use;
-
- iw_stats wstats; /* Wireless-specific statistics */
-
- struct iw_spy_data spy_data;
- struct iw_public_data wireless_data;
-
-#ifdef HISTOGRAM
- int his_number; /* number of intervals */
- u_char his_range[16]; /* boundaries of interval ]n-1; n] */
- u_long his_sum[16]; /* sum in interval */
-#endif /* HISTOGRAM */
-};
-
-/**************************** PROTOTYPES ****************************/
-
-/* ----------------------- MISC. SUBROUTINES ------------------------ */
-static u_char
- wv_irq_to_psa(int);
-static int
- wv_psa_to_irq(u_char);
-/* ------------------- HOST ADAPTER SUBROUTINES ------------------- */
-static inline u_short /* data */
- hasr_read(u_long); /* Read the host interface: base address */
-static inline void
- hacr_write(u_long, /* Write to host interface: base address */
- u_short), /* data */
- hacr_write_slow(u_long,
- u_short),
- set_chan_attn(u_long, /* ioaddr */
- u_short), /* hacr */
- wv_hacr_reset(u_long), /* ioaddr */
- wv_16_off(u_long, /* ioaddr */
- u_short), /* hacr */
- wv_16_on(u_long, /* ioaddr */
- u_short), /* hacr */
- wv_ints_off(struct net_device *),
- wv_ints_on(struct net_device *);
-/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
-static void
- psa_read(u_long, /* Read the Parameter Storage Area. */
- u_short, /* hacr */
- int, /* offset in PSA */
- u_char *, /* buffer to fill */
- int), /* size to read */
- psa_write(u_long, /* Write to the PSA. */
- u_short, /* hacr */
- int, /* offset in PSA */
- u_char *, /* buffer in memory */
- int); /* length of buffer */
-static inline void
- mmc_out(u_long, /* Write 1 byte to the Modem Manag Control. */
- u_short,
- u_char),
- mmc_write(u_long, /* Write n bytes to the MMC. */
- u_char,
- u_char *,
- int);
-static inline u_char /* Read 1 byte from the MMC. */
- mmc_in(u_long,
- u_short);
-static inline void
- mmc_read(u_long, /* Read n bytes from the MMC. */
- u_char,
- u_char *,
- int),
- fee_wait(u_long, /* Wait for frequency EEPROM: base address */
- int, /* base delay to wait for */
- int); /* time to wait */
-static void
- fee_read(u_long, /* Read the frequency EEPROM: base address */
- u_short, /* destination offset */
- u_short *, /* data buffer */
- int); /* number of registers */
-/* ---------------------- I82586 SUBROUTINES ----------------------- */
-static /*inline*/ void
- obram_read(u_long, /* ioaddr */
- u_short, /* o */
- u_char *, /* b */
- int); /* n */
-static inline void
- obram_write(u_long, /* ioaddr */
- u_short, /* o */
- u_char *, /* b */
- int); /* n */
-static void
- wv_ack(struct net_device *);
-static inline int
- wv_synchronous_cmd(struct net_device *,
- const char *),
- wv_config_complete(struct net_device *,
- u_long,
- net_local *);
-static int
- wv_complete(struct net_device *,
- u_long,
- net_local *);
-static inline void
- wv_82586_reconfig(struct net_device *);
-/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
-#ifdef DEBUG_I82586_SHOW
-static void
- wv_scb_show(unsigned short);
-#endif
-static inline void
- wv_init_info(struct net_device *); /* display startup info */
-/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
-static iw_stats *
- wavelan_get_wireless_stats(struct net_device *);
-static void
- wavelan_set_multicast_list(struct net_device *);
-/* ----------------------- PACKET RECEPTION ----------------------- */
-static inline void
- wv_packet_read(struct net_device *, /* Read a packet from a frame. */
- u_short,
- int),
- wv_receive(struct net_device *); /* Read all packets waiting. */
-/* --------------------- PACKET TRANSMISSION --------------------- */
-static inline int
- wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer. */
- void *,
- short);
-static netdev_tx_t
- wavelan_packet_xmit(struct sk_buff *, /* Send a packet. */
- struct net_device *);
-/* -------------------- HARDWARE CONFIGURATION -------------------- */
-static inline int
- wv_mmc_init(struct net_device *), /* Initialize the modem. */
- wv_ru_start(struct net_device *), /* Start the i82586 receiver unit. */
- wv_cu_start(struct net_device *), /* Start the i82586 command unit. */
- wv_82586_start(struct net_device *); /* Start the i82586. */
-static void
- wv_82586_config(struct net_device *); /* Configure the i82586. */
-static inline void
- wv_82586_stop(struct net_device *);
-static int
- wv_hw_reset(struct net_device *), /* Reset the WaveLAN hardware. */
- wv_check_ioaddr(u_long, /* ioaddr */
- u_char *); /* mac address (read) */
-/* ---------------------- INTERRUPT HANDLING ---------------------- */
-static irqreturn_t
- wavelan_interrupt(int, /* interrupt handler */
- void *);
-static void
- wavelan_watchdog(struct net_device *); /* transmission watchdog */
-/* ------------------- CONFIGURATION CALLBACKS ------------------- */
-static int
- wavelan_open(struct net_device *), /* Open the device. */
- wavelan_close(struct net_device *), /* Close the device. */
- wavelan_config(struct net_device *, unsigned short);/* Configure one device. */
-extern struct net_device *wavelan_probe(int unit); /* See Space.c. */
-
-/**************************** VARIABLES ****************************/
-
-/*
- * This is the root of the linked list of WaveLAN drivers
- * It is use to verify that we don't reuse the same base address
- * for two different drivers and to clean up when removing the module.
- */
-static net_local * wavelan_list = (net_local *) NULL;
-
-/*
- * This table is used to translate the PSA value to IRQ number
- * and vice versa.
- */
-static u_char irqvals[] =
-{
- 0, 0, 0, 0x01,
- 0x02, 0x04, 0, 0x08,
- 0, 0, 0x10, 0x20,
- 0x40, 0, 0, 0x80,
-};
-
-/*
- * Table of the available I/O addresses (base addresses) for WaveLAN
- */
-static unsigned short iobase[] =
-{
-#if 0
- /* Leave out 0x3C0 for now -- seems to clash with some video
- * controllers.
- * Leave out the others too -- we will always use 0x390 and leave
- * 0x300 for the Ethernet device.
- * Jean II: 0x3E0 is fine as well.
- */
- 0x300, 0x390, 0x3E0, 0x3C0
-#endif /* 0 */
- 0x390, 0x3E0
-};
-
-#ifdef MODULE
-/* Parameters set by insmod */
-static int io[4];
-static int irq[4];
-static char *name[4];
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(name, charp, NULL, 0);
-
-MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required");
-MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)");
-MODULE_PARM_DESC(name, "WaveLAN interface neme(s)");
-#endif /* MODULE */
-
-#endif /* WAVELAN_P_H */
git.openpandora.org / pandora-kernel.git / blobdiff