Merge branch 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...

[pandora-kernel.git] / drivers / net / wireless / rt2x00 / rt2x00queue.h

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index fcf5252..a4a8c57 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -42,15 +42,18 @@
 /**
  * DOC: Number of entries per queue
  *
- * After research it was concluded that 12 entries in a RX and TX
- * queue would be sufficient. Although this is almost one third of
- * the amount the legacy driver allocated, the queues aren't getting
- * filled to the maximum even when working with the maximum rate.
+ * Under normal load without fragmentation 12 entries are sufficient
+ * without the queue being filled up to the maximum. When using fragmentation
+ * and the queue threshold code we need to add some additional margins to
+ * make sure the queue will never (or only under extreme load) fill up
+ * completely.
+ * Since we don't use preallocated DMA having a large number of queue entries
+ * will have only minimal impact on the memory requirements for the queue.
  */
-#define RX_ENTRIES     12
-#define TX_ENTRIES     12
+#define RX_ENTRIES     24
+#define TX_ENTRIES     24
 #define BEACON_ENTRIES 1
-#define ATIM_ENTRIES   1
+#define ATIM_ENTRIES   8
 
 /**
  * enum data_queue_qid: Queue identification
@@ -82,10 +85,13 @@ enum data_queue_qid {
 /**
  * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc
  *
+ * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
+ * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
  */
-//enum skb_frame_desc_flags {
-//     TEMPORARILY EMPTY
-//};
+enum skb_frame_desc_flags {
+       SKBDESC_DMA_MAPPED_RX = (1 << 0),
+       SKBDESC_DMA_MAPPED_TX = (1 << 1),
+};
 
 /**
  * struct skb_frame_desc: Descriptor information for the skb buffer
@@ -94,19 +100,20 @@ enum data_queue_qid {
  * this structure should not exceed the size of that array (40 bytes).
  *
  * @flags: Frame flags, see &enum skb_frame_desc_flags.
- * @data: Pointer to data part of frame (Start of ieee80211 header).
+ * @desc_len: Length of the frame descriptor.
  * @desc: Pointer to descriptor part of the frame.
  *     Note that this pointer could point to something outside
  *     of the scope of the skb->data pointer.
- * @data_len: Length of the frame data.
- * @desc_len: Length of the frame descriptor.
+ * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
  * @entry: The entry to which this sk buffer belongs.
  */
 struct skb_frame_desc {
        unsigned int flags;
 
-       void *desc;
        unsigned int desc_len;
+       void *desc;
+
+       dma_addr_t skb_dma;
 
        struct queue_entry *entry;
 };
@@ -139,6 +146,7 @@ enum rxdone_entry_desc_flags {
  *
  * Summary of information that has been read from the RX frame descriptor.
  *
+ * @timestamp: RX Timestamp
  * @signal: Signal of the received frame.
  * @rssi: RSSI of the received frame.
  * @size: Data size of the received frame.
@@ -147,6 +155,7 @@ enum rxdone_entry_desc_flags {
 
  */
 struct rxdone_entry_desc {
+       u64 timestamp;
        int signal;
        int rssi;
        int size;
@@ -190,6 +199,7 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
  * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
  * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
  * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
  * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
  * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -201,6 +211,7 @@ enum txentry_desc_flags {
        ENTRY_TXD_RTS_FRAME,
        ENTRY_TXD_CTS_FRAME,
        ENTRY_TXD_OFDM_RATE,
+       ENTRY_TXD_GENERATE_SEQ,
        ENTRY_TXD_FIRST_FRAGMENT,
        ENTRY_TXD_MORE_FRAG,
        ENTRY_TXD_REQ_TIMESTAMP,