* if_sdio_card_to_host() to pad the data.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
out:
if (ret)
- lbs_pr_err("problem fetching packet from firmware\n");
+ pr_err("problem fetching packet from firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
}
if (ret)
- lbs_pr_err("error %d sending packet to firmware\n", ret);
+ pr_err("error %d sending packet to firmware\n", ret);
sdio_release_host(card->func);
out:
if (ret)
- lbs_pr_err("failed to load helper firmware\n");
+ pr_err("failed to load helper firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
out:
if (ret)
- lbs_pr_err("failed to load firmware\n");
+ pr_err("failed to load firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
card->model, &fw_table[0], &helper, &mainfw);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto out;
}
ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd);
if (ret)
- lbs_pr_err("DEEP_SLEEP cmd failed\n");
+ netdev_err(priv->dev, "DEEP_SLEEP cmd failed\n");
mdelay(200);
return ret;
sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
if (ret)
- lbs_pr_err("sdio_writeb failed!\n");
+ netdev_err(priv->dev, "sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
if (ret)
- lbs_pr_err("sdio_writeb failed!\n");
+ netdev_err(priv->dev, "sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
- if (ret)
+ if (ret || !cause)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
}
if (i == func->card->num_info) {
- lbs_pr_err("unable to identify card model\n");
+ pr_err("unable to identify card model\n");
return -ENODEV;
}
break;
}
if (i == ARRAY_SIZE(fw_table)) {
- lbs_pr_err("unknown card model 0x%x\n", card->model);
+ pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
if (ret)
goto release;
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
else
card->rx_unit = 0;
+ /*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
/*
* Enable interrupts now that everything is set up
*/
lbs_deb_sdio("send function INIT command\n");
if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd))
- lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
+ netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
}
ret = lbs_start_card(priv);
if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
&cmd, sizeof(cmd), lbs_cmd_copyback,
(unsigned long) &cmd))
- lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+ pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
}
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
- lbs_pr_info("%s: suspend: PM flags = 0x%x\n",
- sdio_func_id(func), flags);
+ dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
+ sdio_func_id(func), flags);
/* If we aren't being asked to wake on anything, we should bail out
* and let the SD stack power down the card.
*/
if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
- lbs_pr_info("Suspend without wake params -- "
- "powering down card.");
+ dev_info(dev, "Suspend without wake params -- powering down card\n");
return -ENOSYS;
}
if (!(flags & MMC_PM_KEEP_POWER)) {
- lbs_pr_err("%s: cannot remain alive while host is suspended\n",
+ dev_err(dev, "%s: cannot remain alive while host is suspended\n",
sdio_func_id(func));
return -ENOSYS;
}
struct if_sdio_card *card = sdio_get_drvdata(func);
int ret;
- lbs_pr_info("%s: resume: we're back\n", sdio_func_id(func));
+ dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
ret = lbs_resume(card->priv);