}
if (test_bit(STATUS_SCANNING, &priv->status)) {
- if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ if (!test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
IWL_DEBUG_SCAN(priv, "Queuing scan abort.\n");
- set_bit(STATUS_SCAN_ABORTING, &priv->status);
queue_work(priv->workqueue, &priv->abort_scan);
} else
le32_to_cpu(notif->statistics[0]),
le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
#endif
-
- if (!priv->is_internal_short_scan)
- priv->next_scan_jiffies = 0;
}
/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
/* The HW is no longer scanning */
clear_bit(STATUS_SCAN_HW, &priv->status);
- IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
- (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
- "2.4" : "5.2",
+ IWL_DEBUG_INFO(priv, "Scan on %sGHz took %dms\n",
+ (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
jiffies_to_msecs(elapsed_jiffies
- (priv->scan_pass_start, jiffies)));
-
- /* Remove this scanned band from the list of pending
- * bands to scan, band G precedes A in order of scanning
- * as seen in iwl_bg_request_scan */
- if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
- priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
- else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
- priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
+ (priv->scan_start, jiffies)));
- /* If a request to abort was given, or the scan did not succeed
+ /*
+ * If a request to abort was given, or the scan did not succeed
* then we reset the scan state machine and terminate,
- * re-queuing another scan if one has been requested */
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ * re-queuing another scan if one has been requested
+ */
+ if (test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status))
IWL_DEBUG_INFO(priv, "Aborted scan completed.\n");
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- } else {
- /* If there are more bands on this scan pass reschedule */
- if (priv->scan_bands)
- goto reschedule;
- }
-
- if (!priv->is_internal_short_scan)
- priv->next_scan_jiffies = 0;
IWL_DEBUG_INFO(priv, "Setting scan to off\n");
clear_bit(STATUS_SCANNING, &priv->status);
- IWL_DEBUG_INFO(priv, "Scan took %dms\n",
- jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
-
queue_work(priv->workqueue, &priv->scan_completed);
-
- return;
-
-reschedule:
- priv->scan_pass_start = jiffies;
- queue_work(priv->workqueue, &priv->request_scan);
}
void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
EXPORT_SYMBOL(iwl_get_active_dwell_time);
u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band)
+ enum ieee80211_band band,
+ struct ieee80211_vif *vif)
{
u16 passive = (band == IEEE80211_BAND_2GHZ) ?
IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
/* If we're associated, we clamp the maximum passive
* dwell time to be 98% of the beacon interval (minus
* 2 * channel tune time) */
- passive = priv->beacon_int;
+ passive = vif ? vif->bss_conf.beacon_int : 0;
if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
passive = IWL_PASSIVE_DWELL_BASE;
passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
}
EXPORT_SYMBOL(iwl_get_passive_dwell_time);
-static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- struct iwl_scan_channel *scan_ch)
-{
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int i, added = 0;
- u16 channel = 0;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband) {
- IWL_ERR(priv, "invalid band\n");
- return added;
- }
-
- active_dwell = iwl_get_active_dwell_time(priv, band, 0);
- passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- /* only scan single channel, good enough to reset the RF */
- /* pick the first valid not in-use channel */
- if (band == IEEE80211_BAND_5GHZ) {
- for (i = 14; i < priv->channel_count; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel = priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- } else {
- for (i = 0; i < 14; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel =
- priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- }
- if (channel) {
- scan_ch->channel = cpu_to_le16(channel);
- scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* Set txpower levels to defaults */
- scan_ch->dsp_atten = 110;
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tx_gain = ((1 << 5) | (5 << 3));
- added++;
- } else
- IWL_ERR(priv, "no valid channel found\n");
- return added;
-}
-
-static int iwl_get_channels_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 is_active, u8 n_probes,
- struct iwl_scan_channel *scan_ch)
-{
- struct ieee80211_channel *chan;
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
- u16 channel;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband)
- return 0;
-
- active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
- passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
- chan = priv->scan_request->channels[i];
-
- if (chan->band != band)
- continue;
-
- channel = ieee80211_frequency_to_channel(chan->center_freq);
- scan_ch->channel = cpu_to_le16(channel);
-
- ch_info = iwl_get_channel_info(priv, band, channel);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
- channel);
- continue;
- }
-
- if (!is_active || is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
- scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
- else
- scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
-
- if (n_probes)
- scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-
- /* Set txpower levels to defaults */
- scan_ch->dsp_atten = 110;
-
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-
- IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
- channel, le32_to_cpu(scan_ch->type),
- (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
- "ACTIVE" : "PASSIVE",
- (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
- return added;
-}
-
void iwl_init_scan_params(struct iwl_priv *priv)
{
u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
}
EXPORT_SYMBOL(iwl_init_scan_params);
-static int iwl_scan_initiate(struct iwl_priv *priv)
+static int iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif)
{
WARN_ON(!mutex_is_locked(&priv->mutex));
set_bit(STATUS_SCANNING, &priv->status);
priv->is_internal_short_scan = false;
priv->scan_start = jiffies;
- priv->scan_pass_start = priv->scan_start;
- queue_work(priv->workqueue, &priv->request_scan);
+ if (WARN_ON(!priv->cfg->ops->utils->request_scan))
+ return -EOPNOTSUPP;
+
+ priv->cfg->ops->utils->request_scan(priv, vif);
return 0;
}
-#define IWL_DELAY_NEXT_SCAN (HZ*2)
-
int iwl_mac_hw_scan(struct ieee80211_hw *hw,
- struct cfg80211_scan_request *req)
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req)
{
- unsigned long flags;
struct iwl_priv *priv = hw->priv;
- int ret, i;
+ int ret;
IWL_DEBUG_MAC80211(priv, "enter\n");
+ if (req->n_channels == 0)
+ return -EINVAL;
+
mutex_lock(&priv->mutex);
- spin_lock_irqsave(&priv->lock, flags);
if (!iwl_is_ready_rf(priv)) {
ret = -EIO;
goto out_unlock;
}
- if (test_bit(STATUS_SCANNING, &priv->status)) {
+ if (test_bit(STATUS_SCANNING, &priv->status) &&
+ !priv->is_internal_short_scan) {
IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
ret = -EAGAIN;
goto out_unlock;
goto out_unlock;
}
- /* We don't schedule scan within next_scan_jiffies period.
- * Avoid scanning during possible EAPOL exchange, return
- * success immediately.
- */
- if (priv->next_scan_jiffies &&
- time_after(priv->next_scan_jiffies, jiffies)) {
- IWL_DEBUG_SCAN(priv, "scan rejected: within next scan period\n");
- queue_work(priv->workqueue, &priv->scan_completed);
- ret = 0;
- goto out_unlock;
- }
-
- priv->scan_bands = 0;
- for (i = 0; i < req->n_channels; i++)
- priv->scan_bands |= BIT(req->channels[i]->band);
-
+ /* mac80211 will only ask for one band at a time */
+ priv->scan_band = req->channels[0]->band;
priv->scan_request = req;
+ priv->scan_vif = vif;
- ret = iwl_scan_initiate(priv);
+ /*
+ * If an internal scan is in progress, just set
+ * up the scan_request as per above.
+ */
+ if (priv->is_internal_short_scan)
+ ret = 0;
+ else
+ ret = iwl_scan_initiate(priv, vif);
IWL_DEBUG_MAC80211(priv, "leave\n");
out_unlock:
- spin_unlock_irqrestore(&priv->lock, flags);
mutex_unlock(&priv->mutex);
return ret;
queue_work(priv->workqueue, &priv->start_internal_scan);
}
-static void iwl_bg_start_internal_scan(struct work_struct *work)
+void iwl_bg_start_internal_scan(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, start_internal_scan);
mutex_lock(&priv->mutex);
+ if (priv->is_internal_short_scan == true) {
+ IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
+ goto unlock;
+ }
+
if (!iwl_is_ready_rf(priv)) {
IWL_DEBUG_SCAN(priv, "not ready or exit pending\n");
goto unlock;
goto unlock;
}
- priv->scan_bands = 0;
- if (priv->band == IEEE80211_BAND_5GHZ)
- priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
- else
- priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+ priv->scan_band = priv->band;
IWL_DEBUG_SCAN(priv, "Start internal short scan...\n");
set_bit(STATUS_SCANNING, &priv->status);
priv->is_internal_short_scan = true;
- queue_work(priv->workqueue, &priv->request_scan);
+
+ if (WARN_ON(!priv->cfg->ops->utils->request_scan))
+ goto unlock;
+
+ priv->cfg->ops->utils->request_scan(priv, NULL);
unlock:
mutex_unlock(&priv->mutex);
}
-EXPORT_SYMBOL(iwl_internal_short_hw_scan);
-
-#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
+EXPORT_SYMBOL(iwl_bg_start_internal_scan);
void iwl_bg_scan_check(struct work_struct *data)
{
*/
u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
- const u8 *ies, int ie_len, int left)
+ const u8 *ta, const u8 *ies, int ie_len, int left)
{
int len = 0;
u8 *pos = NULL;
frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
- memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
+ memcpy(frame->sa, ta, ETH_ALEN);
memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
frame->seq_ctrl = 0;
if (WARN_ON(left < ie_len))
return len;
- if (ies)
+ if (ies && ie_len) {
memcpy(pos, ies, ie_len);
- len += ie_len;
- left -= ie_len;
+ len += ie_len;
+ }
return (u16)len;
}
EXPORT_SYMBOL(iwl_fill_probe_req);
-static void iwl_bg_request_scan(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, request_scan);
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct iwl_scan_cmd),
- .flags = CMD_SIZE_HUGE,
- };
- struct iwl_scan_cmd *scan;
- struct ieee80211_conf *conf = NULL;
- int ret = 0;
- u32 rate_flags = 0;
- u16 cmd_len;
- u16 rx_chain = 0;
- enum ieee80211_band band;
- u8 n_probes = 0;
- u8 rx_ant = priv->hw_params.valid_rx_ant;
- u8 rate;
- bool is_active = false;
- int chan_mod;
- u8 active_chains;
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- mutex_lock(&priv->mutex);
-
- cancel_delayed_work(&priv->scan_check);
-
- if (!iwl_is_ready(priv)) {
- IWL_WARN(priv, "request scan called when driver not ready.\n");
- goto done;
- }
-
- /* Make sure the scan wasn't canceled before this queued work
- * was given the chance to run... */
- if (!test_bit(STATUS_SCANNING, &priv->status))
- goto done;
-
- /* This should never be called or scheduled if there is currently
- * a scan active in the hardware. */
- if (test_bit(STATUS_SCAN_HW, &priv->status)) {
- IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
- "Ignoring second request.\n");
- ret = -EIO;
- goto done;
- }
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
- goto done;
- }
-
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_HC(priv, "Scan request while abort pending. Queuing.\n");
- goto done;
- }
-
- if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
- goto done;
- }
-
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_DEBUG_HC(priv, "Scan request while uninitialized. Queuing.\n");
- goto done;
- }
-
- if (!priv->scan_bands) {
- IWL_DEBUG_HC(priv, "Aborting scan due to no requested bands\n");
- goto done;
- }
-
- if (!priv->scan) {
- priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) +
- IWL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!priv->scan) {
- ret = -ENOMEM;
- goto done;
- }
- }
- scan = priv->scan;
- memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
- scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
- if (iwl_is_associated(priv)) {
- u16 interval = 0;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
- unsigned long flags;
-
- IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
- spin_lock_irqsave(&priv->lock, flags);
- interval = priv->beacon_int;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
-
- extra = (suspend_time / interval) << 22;
- scan_suspend_time = (extra |
- ((suspend_time % interval) * 1024));
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- if (priv->is_internal_short_scan) {
- IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
- } else if (priv->scan_request->n_ssids) {
- int i, p = 0;
- IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
- for (i = 0; i < priv->scan_request->n_ssids; i++) {
- /* always does wildcard anyway */
- if (!priv->scan_request->ssids[i].ssid_len)
- continue;
- scan->direct_scan[p].id = WLAN_EID_SSID;
- scan->direct_scan[p].len =
- priv->scan_request->ssids[i].ssid_len;
- memcpy(scan->direct_scan[p].ssid,
- priv->scan_request->ssids[i].ssid,
- priv->scan_request->ssids[i].ssid_len);
- n_probes++;
- p++;
- }
- is_active = true;
- } else
- IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
-
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-
- if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
- band = IEEE80211_BAND_2GHZ;
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
- >> RXON_FLG_CHANNEL_MODE_POS;
- if (chan_mod == CHANNEL_MODE_PURE_40) {
- rate = IWL_RATE_6M_PLCP;
- } else {
- rate = IWL_RATE_1M_PLCP;
- rate_flags = RATE_MCS_CCK_MSK;
- }
- scan->good_CRC_th = 0;
- } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
- band = IEEE80211_BAND_5GHZ;
- rate = IWL_RATE_6M_PLCP;
- /*
- * If active scaning is requested but a certain channel
- * is marked passive, we can do active scanning if we
- * detect transmissions.
- */
- scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
-
- /* Force use of chains B and C (0x6) for scan Rx for 4965
- * Avoid A (0x1) because of its off-channel reception on A-band.
- */
- if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
- rx_ant = ANT_BC;
- } else {
- IWL_WARN(priv, "Invalid scan band count\n");
- goto done;
- }
-
- priv->scan_tx_ant[band] =
- iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band]);
- rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
- scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
-
- /* In power save mode use one chain, otherwise use all chains */
- if (test_bit(STATUS_POWER_PMI, &priv->status)) {
- /* rx_ant has been set to all valid chains previously */
- active_chains = rx_ant &
- ((u8)(priv->chain_noise_data.active_chains));
- if (!active_chains)
- active_chains = rx_ant;
-
- IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
- priv->chain_noise_data.active_chains);
-
- rx_ant = first_antenna(active_chains);
- }
- /* MIMO is not used here, but value is required */
- rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
- rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
- rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
- rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
- scan->rx_chain = cpu_to_le16(rx_chain);
- if (!priv->is_internal_short_scan) {
- cmd_len = iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- priv->scan_request->ie,
- priv->scan_request->ie_len,
- IWL_MAX_SCAN_SIZE - sizeof(*scan));
- } else {
- cmd_len = iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- NULL, 0,
- IWL_MAX_SCAN_SIZE - sizeof(*scan));
-
- }
- scan->tx_cmd.len = cpu_to_le16(cmd_len);
- if (iwl_is_monitor_mode(priv))
- scan->filter_flags = RXON_FILTER_PROMISC_MSK;
-
- scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
- RXON_FILTER_BCON_AWARE_MSK);
-
- if (priv->is_internal_short_scan) {
- scan->channel_count =
- iwl_get_single_channel_for_scan(priv, band,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- } else {
- scan->channel_count =
- iwl_get_channels_for_scan(priv, band,
- is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- }
- if (scan->channel_count == 0) {
- IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
- goto done;
- }
-
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct iwl_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &priv->status);
- ret = iwl_send_cmd_sync(priv, &cmd);
- if (ret)
- goto done;
-
- queue_delayed_work(priv->workqueue, &priv->scan_check,
- IWL_SCAN_CHECK_WATCHDOG);
-
- mutex_unlock(&priv->mutex);
- return;
-
- done:
- /* Cannot perform scan. Make sure we clear scanning
- * bits from status so next scan request can be performed.
- * If we don't clear scanning status bit here all next scan
- * will fail
- */
- clear_bit(STATUS_SCAN_HW, &priv->status);
- clear_bit(STATUS_SCANNING, &priv->status);
- /* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
- mutex_unlock(&priv->mutex);
-}
-
void iwl_bg_abort_scan(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, scan_completed);
+ bool internal = false;
IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
cancel_delayed_work(&priv->scan_check);
- if (!priv->is_internal_short_scan)
- ieee80211_scan_completed(priv->hw, false);
- else {
+ mutex_lock(&priv->mutex);
+ if (priv->is_internal_short_scan) {
priv->is_internal_short_scan = false;
IWL_DEBUG_SCAN(priv, "internal short scan completed\n");
+ internal = true;
+ } else {
+ priv->scan_request = NULL;
+ priv->scan_vif = NULL;
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
+ goto out;
+
+ if (internal && priv->scan_request)
+ iwl_scan_initiate(priv, priv->scan_vif);
/* Since setting the TXPOWER may have been deferred while
* performing the scan, fire one off */
- mutex_lock(&priv->mutex);
iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+ out:
mutex_unlock(&priv->mutex);
+
+ /*
+ * Do not hold mutex here since this will cause mac80211 to call
+ * into driver again into functions that will attempt to take
+ * mutex.
+ */
+ if (!internal)
+ ieee80211_scan_completed(priv->hw, false);
}
EXPORT_SYMBOL(iwl_bg_scan_completed);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
{
INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
- INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
git.openpandora.org / pandora-kernel.git / blobdiff