#include "iwl-debug.h"
#include "iwl-core.h"
#include "iwl-io.h"
-#include "iwl-rfkill.h"
#include "iwl-power.h"
#include "iwl-sta.h"
+#include "iwl-helpers.h"
MODULE_DESCRIPTION("iwl core");
IWL_RATE_##pp##M_INDEX, \
IWL_RATE_##np##M_INDEX }
+u32 iwl_debug_level;
+EXPORT_SYMBOL(iwl_debug_level);
+
+static irqreturn_t iwl_isr(int irq, void *data);
+
/*
* Parameter order:
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
}
EXPORT_SYMBOL(iwl_activate_qos);
+/*
+ * AC CWmin CW max AIFSN TXOP Limit TXOP Limit
+ * (802.11b) (802.11a/g)
+ * AC_BK 15 1023 7 0 0
+ * AC_BE 15 1023 3 0 0
+ * AC_VI 7 15 2 6.016ms 3.008ms
+ * AC_VO 3 7 2 3.264ms 1.504ms
+ */
void iwl_reset_qos(struct iwl_priv *priv)
{
u16 cw_min = 15;
if (priv->qos_data.qos_active)
aifs = 3;
+ /* AC_BE */
priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
if (priv->qos_data.qos_active) {
+ /* AC_BK */
i = 1;
priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
+ /* AC_VI */
i = 2;
priv->qos_data.def_qos_parm.ac[i].cw_min =
cpu_to_le16((cw_min + 1) / 2 - 1);
priv->qos_data.def_qos_parm.ac[i].cw_max =
- cpu_to_le16(cw_max);
+ cpu_to_le16(cw_min);
priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
if (is_legacy)
priv->qos_data.def_qos_parm.ac[i].edca_txop =
cpu_to_le16(3008);
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
+ /* AC_VO */
i = 3;
priv->qos_data.def_qos_parm.ac[i].cw_min =
cpu_to_le16((cw_min + 1) / 4 - 1);
priv->qos_data.def_qos_parm.ac[i].cw_max =
- cpu_to_le16((cw_max + 1) / 2 - 1);
+ cpu_to_le16((cw_min + 1) / 2 - 1);
priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
if (is_legacy)
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
- /* Save flags for reg domain usage */
- geo_ch->orig_flags = geo_ch->flags;
-
IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
ch->channel, geo_ch->center_freq,
is_channel_a_band(ch) ? "5.2" : "2.4",
if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
return !(ch_info->fat_extension_channel &
- IEEE80211_CHAN_NO_FAT_ABOVE);
+ IEEE80211_CHAN_NO_HT40PLUS);
else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
return !(ch_info->fat_extension_channel &
- IEEE80211_CHAN_NO_FAT_BELOW);
+ IEEE80211_CHAN_NO_HT40MINUS);
return 0;
}
struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
if ((!iwl_ht_conf->is_ht) ||
- (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
- (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
+ (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ))
return 0;
+ /* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
+ * the bit will not set if it is pure 40MHz case
+ */
if (sta_ht_inf) {
- if ((!sta_ht_inf->ht_supported) ||
- (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
+ if (!sta_ht_inf->ht_supported)
return 0;
}
-
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (priv->disable_ht40)
+ return 0;
+#endif
return iwl_is_channel_extension(priv, priv->band,
- le16_to_cpu(priv->staging_rxon.channel),
- iwl_ht_conf->extension_chan_offset);
+ le16_to_cpu(priv->staging_rxon.channel),
+ iwl_ht_conf->extension_chan_offset);
}
EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
+static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
+{
+ u16 new_val = 0;
+ u16 beacon_factor = 0;
+
+ beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val;
+ new_val = beacon_val / beacon_factor;
+
+ if (!new_val)
+ new_val = max_beacon_val;
+
+ return new_val;
+}
+
+void iwl_setup_rxon_timing(struct iwl_priv *priv)
+{
+ u64 tsf;
+ s32 interval_tm, rem;
+ unsigned long flags;
+ struct ieee80211_conf *conf = NULL;
+ u16 beacon_int;
+
+ conf = ieee80211_get_hw_conf(priv->hw);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp);
+ priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval);
+
+ if (priv->iw_mode == NL80211_IFTYPE_STATION) {
+ beacon_int = priv->beacon_int;
+ priv->rxon_timing.atim_window = 0;
+ } else {
+ beacon_int = priv->vif->bss_conf.beacon_int;
+
+ /* TODO: we need to get atim_window from upper stack
+ * for now we set to 0 */
+ priv->rxon_timing.atim_window = 0;
+ }
+
+ beacon_int = iwl_adjust_beacon_interval(beacon_int,
+ priv->hw_params.max_beacon_itrvl * 1024);
+ priv->rxon_timing.beacon_interval = cpu_to_le16(beacon_int);
+
+ tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */
+ interval_tm = beacon_int * 1024;
+ rem = do_div(tsf, interval_tm);
+ priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ IWL_DEBUG_ASSOC(priv,
+ "beacon interval %d beacon timer %d beacon tim %d\n",
+ le16_to_cpu(priv->rxon_timing.beacon_interval),
+ le32_to_cpu(priv->rxon_timing.beacon_init_val),
+ le16_to_cpu(priv->rxon_timing.atim_window));
+}
+EXPORT_SYMBOL(iwl_setup_rxon_timing);
+
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
{
struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
(priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
+ (priv->staging_rxon.ofdm_ht_triple_stream_basic_rates !=
+ priv->active_rxon.ofdm_ht_triple_stream_basic_rates) ||
(priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
return 1;
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
{
struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
- u32 val;
if (!ht_info->is_ht) {
- rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
- RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
+ rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
RXON_FLG_FAT_PROT_MSK |
RXON_FLG_HT_PROT_MSK);
return;
}
- /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
- if (iwl_is_fat_tx_allowed(priv, NULL))
- rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
- else
- rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
- RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
-
- /* Note: control channel is opposite of extension channel */
- switch (ht_info->extension_chan_offset) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
- rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
- rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_NONE:
- default:
- rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
- break;
+ /* FIXME: if the definition of ht_protection changed, the "translation"
+ * will be needed for rxon->flags
+ */
+ rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
+
+ /* Set up channel bandwidth:
+ * 20 MHz only, 20/40 mixed or pure 40 if fat ok */
+ /* clear the HT channel mode before set the mode */
+ rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+ RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+ if (iwl_is_fat_tx_allowed(priv, NULL)) {
+ /* pure 40 fat */
+ if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
+ rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
+ /* Note: control channel is opposite of extension channel */
+ switch (ht_info->extension_chan_offset) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+ break;
+ }
+ } else {
+ /* Note: control channel is opposite of extension channel */
+ switch (ht_info->extension_chan_offset) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+ rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+ rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+ default:
+ /* channel location only valid if in Mixed mode */
+ IWL_ERR(priv, "invalid extension channel offset\n");
+ break;
+ }
+ }
+ } else {
+ rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
}
- val = ht_info->ht_protection;
-
- rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
-
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv);
* never called for monitor mode. The only way mac80211 informs us about
* monitor mode is through configuring filters (call to configure_filter).
*/
-static bool iwl_is_monitor_mode(struct iwl_priv *priv)
+bool iwl_is_monitor_mode(struct iwl_priv *priv)
{
return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
}
+EXPORT_SYMBOL(iwl_is_monitor_mode);
/**
* iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
if (iwl_is_monitor_mode(priv) &&
!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
- rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS;
- rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS;
- rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
- rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
}
priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
}
}
-EXPORT_SYMBOL(iwl_set_flags_for_band);
/*
* initialize rxon structure with default values from eeprom
RXON_FILTER_ACCEPT_GRP_MSK;
break;
- case NL80211_IFTYPE_MONITOR:
- priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
- priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
- RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
- break;
default:
IWL_ERR(priv, "Unsupported interface type %d\n", mode);
break;
priv->staging_rxon.cck_basic_rates =
(IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
- priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
- RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
+ /* clear both MIX and PURE40 mode flag */
+ priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
+ RXON_FLG_CHANNEL_MODE_PURE_40);
memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
}
EXPORT_SYMBOL(iwl_connection_init_rx_config);
-void iwl_set_rate(struct iwl_priv *priv)
+static void iwl_set_rate(struct iwl_priv *priv)
{
const struct ieee80211_supported_band *hw = NULL;
struct ieee80211_rate *rate;
priv->staging_rxon.ofdm_basic_rates =
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
}
-EXPORT_SYMBOL(iwl_set_rate);
void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
IWL_DEBUG_RADIO(priv, "RX CONFIG:\n");
- iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+ iwl_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n",
IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
-#endif
+static const char *desc_lookup_text[] = {
+ "OK",
+ "FAIL",
+ "BAD_PARAM",
+ "BAD_CHECKSUM",
+ "NMI_INTERRUPT_WDG",
+ "SYSASSERT",
+ "FATAL_ERROR",
+ "BAD_COMMAND",
+ "HW_ERROR_TUNE_LOCK",
+ "HW_ERROR_TEMPERATURE",
+ "ILLEGAL_CHAN_FREQ",
+ "VCC_NOT_STABLE",
+ "FH_ERROR",
+ "NMI_INTERRUPT_HOST",
+ "NMI_INTERRUPT_ACTION_PT",
+ "NMI_INTERRUPT_UNKNOWN",
+ "UCODE_VERSION_MISMATCH",
+ "HW_ERROR_ABS_LOCK",
+ "HW_ERROR_CAL_LOCK_FAIL",
+ "NMI_INTERRUPT_INST_ACTION_PT",
+ "NMI_INTERRUPT_DATA_ACTION_PT",
+ "NMI_TRM_HW_ER",
+ "NMI_INTERRUPT_TRM",
+ "NMI_INTERRUPT_BREAK_POINT"
+ "DEBUG_0",
+ "DEBUG_1",
+ "DEBUG_2",
+ "DEBUG_3",
+ "UNKNOWN"
+};
+
+static const char *desc_lookup(int i)
+{
+ int max = ARRAY_SIZE(desc_lookup_text) - 1;
+
+ if (i < 0 || i > max)
+ i = max;
+
+ return desc_lookup_text[i];
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+ u32 data2, line;
+ u32 desc, time, count, base, data1;
+ u32 blink1, blink2, ilink1, ilink2;
+
+ switch (priv->ucode_type) {
+ case UCODE_RT:
+ base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
+ break;
+ case UCODE_INIT:
+ base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+ break;
+ default:
+ IWL_ERR(priv, "uCode image not available\n");
+ return;
+ }
+
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+ return;
+ }
+
+ count = iwl_read_targ_mem(priv, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IWL_ERR(priv, "Start IWL Error Log Dump:\n");
+ IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
+ priv->status, count);
+ }
+
+ desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+ blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
+ blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
+ ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
+ ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
+ data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
+ data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
+ line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
+ time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
+
+ IWL_ERR(priv, "Desc Time "
+ "data1 data2 line\n");
+ IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
+ desc_lookup(desc), desc, time, data1, data2, line);
+ IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
+ IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
+ ilink1, ilink2);
+
+}
+
+#define EVENT_START_OFFSET (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+ u32 num_events, u32 mode)
+{
+ u32 i;
+ u32 base; /* SRAM byte address of event log header */
+ u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+ u32 ptr; /* SRAM byte address of log data */
+ u32 ev, time, data; /* event log data */
+
+ if (num_events == 0)
+ return;
+ switch (priv->ucode_type) {
+ case UCODE_RT:
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+ break;
+ case UCODE_INIT:
+ base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ break;
+ default:
+ IWL_ERR(priv, "uCode image not available\n");
+ return;
+ }
+
+ if (mode == 0)
+ event_size = 2 * sizeof(u32);
+ else
+ event_size = 3 * sizeof(u32);
+
+ ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+ /* "time" is actually "data" for mode 0 (no timestamp).
+ * place event id # at far right for easier visual parsing. */
+ for (i = 0; i < num_events; i++) {
+ ev = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ time = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ if (mode == 0) {
+ /* data, ev */
+ IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
+ } else {
+ data = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+ time, data, ev);
+ }
+ }
+}
+
+void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+ u32 base; /* SRAM byte address of event log header */
+ u32 capacity; /* event log capacity in # entries */
+ u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
+ u32 num_wraps; /* # times uCode wrapped to top of log */
+ u32 next_entry; /* index of next entry to be written by uCode */
+ u32 size; /* # entries that we'll print */
+
+ switch (priv->ucode_type) {
+ case UCODE_RT:
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+ break;
+ case UCODE_INIT:
+ base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ break;
+ default:
+ IWL_ERR(priv, "uCode image not available\n");
+ return;
+ }
+
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+ return;
+ }
+
+ /* event log header */
+ capacity = iwl_read_targ_mem(priv, base);
+ mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
+ num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
+ next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
+
+ size = num_wraps ? capacity : next_entry;
+
+ /* bail out if nothing in log */
+ if (size == 0) {
+ IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
+ return;
+ }
+
+ IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
+ size, num_wraps);
+
+ /* if uCode has wrapped back to top of log, start at the oldest entry,
+ * i.e the next one that uCode would fill. */
+ if (num_wraps)
+ iwl_print_event_log(priv, next_entry,
+ capacity - next_entry, mode);
+ /* (then/else) start at top of log */
+ iwl_print_event_log(priv, 0, next_entry, mode);
+
+}
+#endif
/**
* iwl_irq_handle_error - called for HW or SW error interrupt from card
*/
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & IWL_DL_FW_ERRORS) {
+ if (iwl_debug_level & IWL_DL_FW_ERRORS) {
iwl_dump_nic_error_log(priv);
iwl_dump_nic_event_log(priv);
iwl_print_rx_config_cmd(priv);
IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
"Restarting adapter due to uCode error.\n");
- if (iwl_is_associated(priv)) {
- memcpy(&priv->recovery_rxon, &priv->active_rxon,
- sizeof(priv->recovery_rxon));
- priv->error_recovering = 1;
- }
if (priv->cfg->mod_params->restart_fw)
queue_work(priv->workqueue, &priv->restart);
}
BIT(NL80211_IFTYPE_ADHOC);
hw->wiphy->custom_regulatory = true;
- hw->wiphy->max_scan_ssids = 1;
- hw->wiphy->max_scan_ie_len = 0; /* XXX for now */
+
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+ /* we create the 802.11 header and a zero-length SSID element */
+ hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
- hw->conf.beacon_int = 100;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
int iwl_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
if (priv->cfg->mod_params->amsdu_size_8K)
priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
+ priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
+
if (priv->cfg->mod_params->disable_11n)
priv->cfg->sku &= ~IWL_SKU_N;
priv->ibss_beacon = NULL;
spin_lock_init(&priv->lock);
- spin_lock_init(&priv->power_data.lock);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
mutex_init(&priv->mutex);
/* Clear the driver's (not device's) station table */
- priv->cfg->ops->smgmt->clear_station_table(priv);
+ iwl_clear_stations_table(priv);
priv->data_retry_limit = -1;
priv->ieee_channels = NULL;
}
EXPORT_SYMBOL(iwl_uninit_drv);
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
-void iwl_disable_interrupts(struct iwl_priv *priv)
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_priv *priv)
{
- clear_bit(STATUS_INT_ENABLED, &priv->status);
-
- /* disable interrupts from uCode/NIC to host */
- iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
- /* acknowledge/clear/reset any interrupts still pending
- * from uCode or flow handler (Rx/Tx DMA) */
- iwl_write32(priv, CSR_INT, 0xffffffff);
- iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
- IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
+ if (priv->ict_tbl_vir) {
+ pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) +
+ PAGE_SIZE, priv->ict_tbl_vir,
+ priv->ict_tbl_dma);
+ priv->ict_tbl_vir = NULL;
+ }
}
-EXPORT_SYMBOL(iwl_disable_interrupts);
+EXPORT_SYMBOL(iwl_free_isr_ict);
-void iwl_enable_interrupts(struct iwl_priv *priv)
-{
- IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
- set_bit(STATUS_INT_ENABLED, &priv->status);
- iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
-}
-EXPORT_SYMBOL(iwl_enable_interrupts);
-irqreturn_t iwl_isr(int irq, void *data)
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_priv *priv)
{
- struct iwl_priv *priv = data;
- u32 inta, inta_mask;
+
+ if (priv->cfg->use_isr_legacy)
+ return 0;
+ /* allocate shrared data table */
+ priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) *
+ ICT_COUNT) + PAGE_SIZE,
+ &priv->ict_tbl_dma);
+ if (!priv->ict_tbl_vir)
+ return -ENOMEM;
+
+ /* align table to PAGE_SIZE boundry */
+ priv->aligned_ict_tbl_dma = ALIGN(priv->ict_tbl_dma, PAGE_SIZE);
+
+ IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+ (unsigned long long)priv->ict_tbl_dma,
+ (unsigned long long)priv->aligned_ict_tbl_dma,
+ (int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+ priv->ict_tbl = priv->ict_tbl_vir +
+ (priv->aligned_ict_tbl_dma - priv->ict_tbl_dma);
+
+ IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n",
+ priv->ict_tbl, priv->ict_tbl_vir,
+ (int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+ /* reset table and index to all 0 */
+ memset(priv->ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+ priv->ict_index = 0;
+
+ /* add periodic RX interrupt */
+ priv->inta_mask |= CSR_INT_BIT_RX_PERIODIC;
+ return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_isr_ict);
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_priv *priv)
+{
+ u32 val;
+ unsigned long flags;
+
+ if (!priv->ict_tbl_vir)
+ return 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_disable_interrupts(priv);
+
+ memset(&priv->ict_tbl[0],0, sizeof(u32) * ICT_COUNT);
+
+ val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+ val |= CSR_DRAM_INT_TBL_ENABLE;
+ val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+ IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X "
+ "aligned dma address %Lx\n",
+ val, (unsigned long long)priv->aligned_ict_tbl_dma);
+
+ iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val);
+ priv->use_ict = true;
+ priv->ict_index = 0;
+ iwl_write32(priv, CSR_INT, priv->inta_mask);
+ iwl_enable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_reset_ict);
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->use_ict = false;
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(iwl_disable_ict);
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+ struct iwl_priv *priv = data;
+ u32 inta, inta_mask;
+ u32 val = 0;
+
+ if (!priv)
+ return IRQ_NONE;
+
+ /* dram interrupt table not set yet,
+ * use legacy interrupt.
+ */
+ if (!priv->use_ict)
+ return iwl_isr(irq, data);
+
+ spin_lock(&priv->lock);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here.
+ */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
+ iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!priv->ict_tbl[priv->ict_index]) {
+ IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+ goto none;
+ }
+
+ /* read all entries that not 0 start with ict_index */
+ while (priv->ict_tbl[priv->ict_index]) {
+
+ val |= priv->ict_tbl[priv->ict_index];
+ IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n",
+ priv->ict_index,
+ priv->ict_tbl[priv->ict_index]);
+ priv->ict_tbl[priv->ict_index] = 0;
+ priv->ict_index = iwl_queue_inc_wrap(priv->ict_index,
+ ICT_COUNT);
+
+ }
+
+ /* We should not get this value, just ignore it. */
+ if (val == 0xffffffff)
+ val = 0;
+
+ inta = (0xff & val) | ((0xff00 & val) << 16);
+ IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+ inta, inta_mask, val);
+
+ inta &= priv->inta_mask;
+ priv->inta |= inta;
+
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta))
+ tasklet_schedule(&priv->irq_tasklet);
+ else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) {
+ /* Allow interrupt if was disabled by this handler and
+ * no tasklet was schedules, We should not enable interrupt,
+ * tasklet will enable it.
+ */
+ iwl_enable_interrupts(priv);
+ }
+
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+
+ none:
+ /* re-enable interrupts here since we don't have anything to service.
+ * only Re-enable if disabled by irq.
+ */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+ iwl_enable_interrupts(priv);
+
+ spin_unlock(&priv->lock);
+ return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr_ict);
+
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+ struct iwl_priv *priv = data;
+ u32 inta, inta_mask;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ u32 inta_fh;
+#endif
+ if (!priv)
+ return IRQ_NONE;
+
+ spin_lock(&priv->lock);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here. */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
+ iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+ /* Discover which interrupts are active/pending */
+ inta = iwl_read32(priv, CSR_INT);
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!inta) {
+ IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+ goto none;
+ }
+
+ if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+ /* Hardware disappeared. It might have already raised
+ * an interrupt */
+ IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+ goto unplugged;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_debug_level & (IWL_DL_ISR)) {
+ inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+ IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
+ "fh 0x%08x\n", inta, inta_mask, inta_fh);
+ }
+#endif
+
+ priv->inta |= inta;
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta))
+ tasklet_schedule(&priv->irq_tasklet);
+ else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+ iwl_enable_interrupts(priv);
+
+ unplugged:
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+
+ none:
+ /* re-enable interrupts here since we don't have anything to service. */
+ /* only Re-enable if diabled by irq and no schedules tasklet. */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+ iwl_enable_interrupts(priv);
+
+ spin_unlock(&priv->lock);
+ return IRQ_NONE;
+}
+
+irqreturn_t iwl_isr_legacy(int irq, void *data)
+{
+ struct iwl_priv *priv = data;
+ u32 inta, inta_mask;
u32 inta_fh;
if (!priv)
return IRQ_NONE;
spin_unlock(&priv->lock);
return IRQ_NONE;
}
-EXPORT_SYMBOL(iwl_isr);
+EXPORT_SYMBOL(iwl_isr_legacy);
int iwl_send_bt_config(struct iwl_priv *priv)
{
u32 stat_flags = 0;
struct iwl_host_cmd cmd = {
.id = REPLY_STATISTICS_CMD,
- .meta.flags = flags,
+ .flags = flags,
.len = sizeof(stat_flags),
.data = (u8 *) &stat_flags,
};
IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
- ret = iwl_grab_nic_access(priv);
- if (ret)
- return ret;
-
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
}
}
- iwl_release_nic_access(priv);
-
return ret;
}
IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
- ret = iwl_grab_nic_access(priv);
- if (ret)
- return ret;
-
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
IWL49_RTC_INST_LOWER_BOUND);
}
}
- iwl_release_nic_access(priv);
-
if (!errcnt)
IWL_DEBUG_INFO(priv,
"ucode image in INSTRUCTION memory is good\n");
/**
* iwl_verify_ucode - determine which instruction image is in SRAM,
- * and verify its contents
- */
-int iwl_verify_ucode(struct iwl_priv *priv)
-{
- __le32 *image;
- u32 len;
- int ret;
-
- /* Try bootstrap */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- ret = iwlcore_verify_inst_sparse(priv, image, len);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try initialize */
- image = (__le32 *)priv->ucode_init.v_addr;
- len = priv->ucode_init.len;
- ret = iwlcore_verify_inst_sparse(priv, image, len);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try runtime/protocol */
- image = (__le32 *)priv->ucode_code.v_addr;
- len = priv->ucode_code.len;
- ret = iwlcore_verify_inst_sparse(priv, image, len);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
- return 0;
- }
-
- IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
-
- /* Since nothing seems to match, show first several data entries in
- * instruction SRAM, so maybe visual inspection will give a clue.
- * Selection of bootstrap image (vs. other images) is arbitrary. */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- ret = iwl_verify_inst_full(priv, image, len);
-
- return ret;
-}
-EXPORT_SYMBOL(iwl_verify_ucode);
-
-
-static const char *desc_lookup_text[] = {
- "OK",
- "FAIL",
- "BAD_PARAM",
- "BAD_CHECKSUM",
- "NMI_INTERRUPT_WDG",
- "SYSASSERT",
- "FATAL_ERROR",
- "BAD_COMMAND",
- "HW_ERROR_TUNE_LOCK",
- "HW_ERROR_TEMPERATURE",
- "ILLEGAL_CHAN_FREQ",
- "VCC_NOT_STABLE",
- "FH_ERROR",
- "NMI_INTERRUPT_HOST",
- "NMI_INTERRUPT_ACTION_PT",
- "NMI_INTERRUPT_UNKNOWN",
- "UCODE_VERSION_MISMATCH",
- "HW_ERROR_ABS_LOCK",
- "HW_ERROR_CAL_LOCK_FAIL",
- "NMI_INTERRUPT_INST_ACTION_PT",
- "NMI_INTERRUPT_DATA_ACTION_PT",
- "NMI_TRM_HW_ER",
- "NMI_INTERRUPT_TRM",
- "NMI_INTERRUPT_BREAK_POINT"
- "DEBUG_0",
- "DEBUG_1",
- "DEBUG_2",
- "DEBUG_3",
- "UNKNOWN"
-};
-
-static const char *desc_lookup(int i)
-{
- int max = ARRAY_SIZE(desc_lookup_text) - 1;
-
- if (i < 0 || i > max)
- i = max;
-
- return desc_lookup_text[i];
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-void iwl_dump_nic_error_log(struct iwl_priv *priv)
-{
- u32 data2, line;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
- int ret;
-
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
- if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
- return;
- }
-
- ret = iwl_grab_nic_access(priv);
- if (ret) {
- IWL_WARN(priv, "Can not read from adapter at this time.\n");
- return;
- }
-
- count = iwl_read_targ_mem(priv, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IWL_ERR(priv, "Start IWL Error Log Dump:\n");
- IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
- priv->status, count);
- }
-
- desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
- blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
- blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
- ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
- ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
- data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
- data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
- line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
- time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
-
- IWL_ERR(priv, "Desc Time "
- "data1 data2 line\n");
- IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
- desc_lookup(desc), desc, time, data1, data2, line);
- IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
- IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
- ilink1, ilink2);
-
- iwl_release_nic_access(priv);
-}
-EXPORT_SYMBOL(iwl_dump_nic_error_log);
-
-#define EVENT_START_OFFSET (4 * sizeof(u32))
-
-/**
- * iwl_print_event_log - Dump error event log to syslog
- *
- * NOTE: Must be called with iwl_grab_nic_access() already obtained!
- */
-static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
- u32 num_events, u32 mode)
-{
- u32 i;
- u32 base; /* SRAM byte address of event log header */
- u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
- u32 ptr; /* SRAM byte address of log data */
- u32 ev, time, data; /* event log data */
-
- if (num_events == 0)
- return;
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (mode == 0)
- event_size = 2 * sizeof(u32);
- else
- event_size = 3 * sizeof(u32);
-
- ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
- /* "time" is actually "data" for mode 0 (no timestamp).
- * place event id # at far right for easier visual parsing. */
- for (i = 0; i < num_events; i++) {
- ev = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- time = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- if (mode == 0) {
- /* data, ev */
- IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
- } else {
- data = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
- time, data, ev);
- }
- }
-}
-
-void iwl_dump_nic_event_log(struct iwl_priv *priv)
+ * and verify its contents
+ */
+int iwl_verify_ucode(struct iwl_priv *priv)
{
+ __le32 *image;
+ u32 len;
int ret;
- u32 base; /* SRAM byte address of event log header */
- u32 capacity; /* event log capacity in # entries */
- u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
- u32 num_wraps; /* # times uCode wrapped to top of log */
- u32 next_entry; /* index of next entry to be written by uCode */
- u32 size; /* # entries that we'll print */
-
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
- if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return;
+ /* Try bootstrap */
+ image = (__le32 *)priv->ucode_boot.v_addr;
+ len = priv->ucode_boot.len;
+ ret = iwlcore_verify_inst_sparse(priv, image, len);
+ if (!ret) {
+ IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
+ return 0;
}
- ret = iwl_grab_nic_access(priv);
- if (ret) {
- IWL_WARN(priv, "Can not read from adapter at this time.\n");
- return;
+ /* Try initialize */
+ image = (__le32 *)priv->ucode_init.v_addr;
+ len = priv->ucode_init.len;
+ ret = iwlcore_verify_inst_sparse(priv, image, len);
+ if (!ret) {
+ IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
+ return 0;
}
- /* event log header */
- capacity = iwl_read_targ_mem(priv, base);
- mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
- num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
- next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
- size = num_wraps ? capacity : next_entry;
-
- /* bail out if nothing in log */
- if (size == 0) {
- IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
- iwl_release_nic_access(priv);
- return;
+ /* Try runtime/protocol */
+ image = (__le32 *)priv->ucode_code.v_addr;
+ len = priv->ucode_code.len;
+ ret = iwlcore_verify_inst_sparse(priv, image, len);
+ if (!ret) {
+ IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
+ return 0;
}
- IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
- size, num_wraps);
+ IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
- /* if uCode has wrapped back to top of log, start at the oldest entry,
- * i.e the next one that uCode would fill. */
- if (num_wraps)
- iwl_print_event_log(priv, next_entry,
- capacity - next_entry, mode);
- /* (then/else) start at top of log */
- iwl_print_event_log(priv, 0, next_entry, mode);
+ /* Since nothing seems to match, show first several data entries in
+ * instruction SRAM, so maybe visual inspection will give a clue.
+ * Selection of bootstrap image (vs. other images) is arbitrary. */
+ image = (__le32 *)priv->ucode_boot.v_addr;
+ len = priv->ucode_boot.len;
+ ret = iwl_verify_inst_full(priv, image, len);
- iwl_release_nic_access(priv);
+ return ret;
}
-EXPORT_SYMBOL(iwl_dump_nic_event_log);
+EXPORT_SYMBOL(iwl_verify_ucode);
+
void iwl_rf_kill_ct_config(struct iwl_priv *priv)
{
struct iwl_ct_kill_config cmd;
+ struct iwl_ct_kill_throttling_config adv_cmd;
unsigned long flags;
int ret = 0;
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
spin_unlock_irqrestore(&priv->lock, flags);
+ priv->power_data.ct_kill_toggle = false;
+
+ switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_1000:
+ case CSR_HW_REV_TYPE_6x00:
+ case CSR_HW_REV_TYPE_6x50:
+ adv_cmd.critical_temperature_enter =
+ cpu_to_le32(priv->hw_params.ct_kill_threshold);
+ adv_cmd.critical_temperature_exit =
+ cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
+
+ ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(adv_cmd), &adv_cmd);
+ break;
+ default:
+ cmd.critical_temperature_R =
+ cpu_to_le32(priv->hw_params.ct_kill_threshold);
- cmd.critical_temperature_R =
- cpu_to_le32(priv->hw_params.ct_kill_threshold);
-
+ ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(cmd), &cmd);
+ break;
+ }
ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
sizeof(cmd), &cmd);
if (ret)
.id = REPLY_CARD_STATE_CMD,
.len = sizeof(u32),
.data = &flags,
- .meta.flags = meta_flag,
+ .flags = meta_flag,
};
return iwl_send_cmd(priv, &cmd);
}
-EXPORT_SYMBOL(iwl_send_card_state);
-
-void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
-{
- unsigned long flags;
-
- if (test_bit(STATUS_RF_KILL_SW, &priv->status))
- return;
-
- IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO OFF\n");
-
- iwl_scan_cancel(priv);
- /* FIXME: This is a workaround for AP */
- if (priv->iw_mode != NL80211_IFTYPE_AP) {
- spin_lock_irqsave(&priv->lock, flags);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_SW_BIT_RFKILL);
- spin_unlock_irqrestore(&priv->lock, flags);
- /* call the host command only if no hw rf-kill set */
- if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
- iwl_is_ready(priv))
- iwl_send_card_state(priv,
- CARD_STATE_CMD_DISABLE, 0);
- set_bit(STATUS_RF_KILL_SW, &priv->status);
- /* make sure mac80211 stop sending Tx frame */
- if (priv->mac80211_registered)
- ieee80211_stop_queues(priv->hw);
- }
-}
-EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
-
-int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
-{
- unsigned long flags;
-
- if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
- return 0;
-
- IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO ON\n");
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* If the driver is up it will receive CARD_STATE_NOTIFICATION
- * notification where it will clear SW rfkill status.
- * Setting it here would break the handler. Only if the
- * interface is down we can set here since we don't
- * receive any further notification.
- */
- if (!priv->is_open)
- clear_bit(STATUS_RF_KILL_SW, &priv->status);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* wake up ucode */
- msleep(10);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl_read32(priv, CSR_UCODE_DRV_GP1);
- if (!iwl_grab_nic_access(priv))
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
- IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
- "disabled by HW switch\n");
- return 0;
- }
-
- /* when driver is up while rfkill is on, it wont receive
- * any CARD_STATE_NOTIFICATION notifications so we have to
- * restart it in here
- */
- if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) {
- clear_bit(STATUS_RF_KILL_SW, &priv->status);
- if (!iwl_is_rfkill(priv))
- queue_work(priv->workqueue, &priv->up);
- }
-
- /* If the driver is already loaded, it will receive
- * CARD_STATE_NOTIFICATION notifications and the handler will
- * call restart to reload the driver.
- */
- return 1;
-}
-EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);
-
-void iwl_bg_rf_kill(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
-
- wake_up_interruptible(&priv->wait_command_queue);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
-
- if (!iwl_is_rfkill(priv)) {
- IWL_DEBUG_RF_KILL(priv,
- "HW and/or SW RF Kill no longer active, restarting "
- "device\n");
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
- priv->is_open)
- queue_work(priv->workqueue, &priv->restart);
- } else {
- /* make sure mac80211 stop sending Tx frame */
- if (priv->mac80211_registered)
- ieee80211_stop_queues(priv->hw);
-
- if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
- IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
- "disabled by SW switch\n");
- else
- IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
- "Kill switch must be turned off for "
- "wireless networking to work.\n");
- }
- mutex_unlock(&priv->mutex);
- iwl_rfkill_set_hw_state(priv);
-}
-EXPORT_SYMBOL(iwl_bg_rf_kill);
void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
"notification for %s:\n",
le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
- iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+ iwl_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
}
EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
}
EXPORT_SYMBOL(iwl_rx_reply_error);
+void iwl_clear_isr_stats(struct iwl_priv *priv)
+{
+ memset(&priv->isr_stats, 0, sizeof(priv->isr_stats));
+}
+
int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
iwl_conf->ht_protection =
- bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+ bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
iwl_conf->non_GF_STA_present =
- !!(bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+ !!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
rcu_read_unlock();
#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
void iwl_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes)
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
{
struct iwl_priv *priv = hw->priv;
+ int ret;
IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
+ if (!iwl_is_alive(priv))
+ return;
+
+ mutex_lock(&priv->mutex);
+
+ if (changes & BSS_CHANGED_BEACON &&
+ priv->iw_mode == NL80211_IFTYPE_AP) {
+ dev_kfree_skb(priv->ibss_beacon);
+ priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
+ }
+
+ if (changes & BSS_CHANGED_BEACON_INT) {
+ priv->beacon_int = bss_conf->beacon_int;
+ /* TODO: in AP mode, do something to make this take effect */
+ }
+
+ if (changes & BSS_CHANGED_BSSID) {
+ IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
+
+ /*
+ * If there is currently a HW scan going on in the
+ * background then we need to cancel it else the RXON
+ * below/in post_associate will fail.
+ */
+ if (iwl_scan_cancel_timeout(priv, 100)) {
+ IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
+ IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
+ /* mac80211 only sets assoc when in STATION mode */
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
+ bss_conf->assoc) {
+ memcpy(priv->staging_rxon.bssid_addr,
+ bss_conf->bssid, ETH_ALEN);
+
+ /* currently needed in a few places */
+ memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+ } else {
+ priv->staging_rxon.filter_flags &=
+ ~RXON_FILTER_ASSOC_MSK;
+ }
+
+ }
+
+ /*
+ * This needs to be after setting the BSSID in case
+ * mac80211 decides to do both changes at once because
+ * it will invoke post_associate.
+ */
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+ changes & BSS_CHANGED_BEACON) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon)
+ iwl_mac_beacon_update(hw, beacon);
+ }
+
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
bss_conf->use_short_preamble);
priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
}
+ if (changes & BSS_CHANGED_BASIC_RATES) {
+ /* XXX use this information
+ *
+ * To do that, remove code from iwl_set_rate() and put something
+ * like this here:
+ *
+ if (A-band)
+ priv->staging_rxon.ofdm_basic_rates =
+ bss_conf->basic_rates;
+ else
+ priv->staging_rxon.ofdm_basic_rates =
+ bss_conf->basic_rates >> 4;
+ priv->staging_rxon.cck_basic_rates =
+ bss_conf->basic_rates & 0xF;
+ */
+ }
+
if (changes & BSS_CHANGED_HT) {
iwl_ht_conf(priv, bss_conf);
if (changes & BSS_CHANGED_ASSOC) {
IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
- /* This should never happen as this function should
- * never be called from interrupt context. */
- if (WARN_ON_ONCE(in_interrupt()))
- return;
if (bss_conf->assoc) {
priv->assoc_id = bss_conf->aid;
priv->beacon_int = bss_conf->beacon_int;
priv->timestamp = bss_conf->timestamp;
priv->assoc_capability = bss_conf->assoc_capability;
- /* we have just associated, don't start scan too early
- * leave time for EAPOL exchange to complete
+ /*
+ * We have just associated, don't start scan too early
+ * leave time for EAPOL exchange to complete.
+ *
+ * XXX: do this in mac80211
*/
priv->next_scan_jiffies = jiffies +
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
- mutex_lock(&priv->mutex);
- priv->cfg->ops->lib->post_associate(priv);
- mutex_unlock(&priv->mutex);
- } else {
+ if (!iwl_is_rfkill(priv))
+ priv->cfg->ops->lib->post_associate(priv);
+ } else
priv->assoc_id = 0;
- IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
+
+ }
+
+ if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+ IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
+ changes);
+ ret = iwl_send_rxon_assoc(priv);
+ if (!ret) {
+ /* Sync active_rxon with latest change. */
+ memcpy((void *)&priv->active_rxon,
+ &priv->staging_rxon,
+ sizeof(struct iwl_rxon_cmd));
}
- } else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
- IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
- iwl_send_rxon_assoc(priv);
}
+ mutex_unlock(&priv->mutex);
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_bss_info_changed);
memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
- priv->cfg->ops->smgmt->clear_station_table(priv);
+ iwl_clear_stations_table(priv);
/* dont commit rxon if rf-kill is on*/
if (!iwl_is_ready_rf(priv))
return -EAGAIN;
- cancel_delayed_work(&priv->scan_check);
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- return -EAGAIN;
- }
-
iwlcore_commit_rxon(priv);
return 0;
mutex_lock(&priv->mutex);
- if (!iwl_is_ready(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- ret = -EIO;
- goto out;
- }
-
IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
conf->channel->hw_value, changed);
iwl_set_rate(priv);
}
- if (changed & IEEE80211_CONF_CHANGE_PS) {
- if (conf->flags & IEEE80211_CONF_PS)
- ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
- else
- ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+ if (changed & IEEE80211_CONF_CHANGE_PS &&
+ priv->iw_mode == NL80211_IFTYPE_STATION) {
+ priv->power_data.power_disabled =
+ !(conf->flags & IEEE80211_CONF_PS);
+ ret = iwl_power_update_mode(priv, 0);
if (ret)
IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv);
- if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
- if (conf->radio_enabled &&
- iwl_radio_kill_sw_enable_radio(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
- "waiting for uCode\n");
- goto out;
- }
-
- if (!conf->radio_enabled)
- iwl_radio_kill_sw_disable_radio(priv);
- }
-
- if (!conf->radio_enabled) {
- IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
+ if (!iwl_is_ready(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
goto out;
}
}
EXPORT_SYMBOL(iwl_mac_config);
+int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
+ struct ieee80211_tx_queue_stats *stats)
+{
+ struct iwl_priv *priv = hw->priv;
+ int i, avail;
+ struct iwl_tx_queue *txq;
+ struct iwl_queue *q;
+ unsigned long flags;
+
+ IWL_DEBUG_MAC80211(priv, "enter\n");
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ for (i = 0; i < AC_NUM; i++) {
+ txq = &priv->txq[i];
+ q = &txq->q;
+ avail = iwl_queue_space(q);
+
+ stats[i].len = q->n_window - avail;
+ stats[i].limit = q->n_window - q->high_mark;
+ stats[i].count = q->n_window;
+
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_mac_get_tx_stats);
+
+void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
+{
+ struct iwl_priv *priv = hw->priv;
+ unsigned long flags;
+
+ mutex_lock(&priv->mutex);
+ IWL_DEBUG_MAC80211(priv, "enter\n");
+
+ spin_lock_irqsave(&priv->lock, flags);
+ memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ iwl_reset_qos(priv);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->assoc_id = 0;
+ priv->assoc_capability = 0;
+ priv->assoc_station_added = 0;
+
+ /* new association get rid of ibss beacon skb */
+ if (priv->ibss_beacon)
+ dev_kfree_skb(priv->ibss_beacon);
+
+ priv->ibss_beacon = NULL;
+
+ priv->beacon_int = priv->vif->bss_conf.beacon_int;
+ priv->timestamp = 0;
+ if ((priv->iw_mode == NL80211_IFTYPE_STATION))
+ priv->beacon_int = 0;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
+ /* we are restarting association process
+ * clear RXON_FILTER_ASSOC_MSK bit
+ */
+ if (priv->iw_mode != NL80211_IFTYPE_AP) {
+ iwl_scan_cancel_timeout(priv, 100);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwlcore_commit_rxon(priv);
+ }
+
+ if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+ IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
+ iwl_set_rate(priv);
+
+ mutex_unlock(&priv->mutex);
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_mac_reset_tsf);
+
#ifdef CONFIG_PM
int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)