#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
+#define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
+#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
+#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
+
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
+ priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
+
return 0;
}
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
+ priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
+
return 0;
}
-static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
+ struct ieee80211_channel_switch *ch_switch)
{
struct iwl6000_channel_switch_cmd cmd;
const struct iwl_channel_info *ch_info;
+ u32 switch_time_in_usec, ucode_switch_time;
+ u16 ch;
+ u32 tsf_low;
+ u8 switch_count;
+ u16 beacon_interval = le16_to_cpu(priv->rxon_timing.beacon_interval);
+ struct ieee80211_vif *vif = priv->vif;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
.len = sizeof(cmd),
- .flags = CMD_SIZE_HUGE,
+ .flags = CMD_SYNC,
.data = &cmd,
};
- IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
- priv->active_rxon.channel, channel);
-
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- cmd.channel = cpu_to_le16(channel);
+ ch = ieee80211_frequency_to_channel(ch_switch->channel->center_freq);
+ IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+ priv->active_rxon.channel, ch);
+ cmd.channel = cpu_to_le16(ch);
cmd.rxon_flags = priv->staging_rxon.flags;
cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- ch_info = iwl_get_channel_info(priv, priv->band, channel);
+ switch_count = ch_switch->count;
+ tsf_low = ch_switch->timestamp & 0x0ffffffff;
+ /*
+ * calculate the ucode channel switch time
+ * adding TSF as one of the factor for when to switch
+ */
+ if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+ if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+ beacon_interval)) {
+ switch_count -= (priv->ucode_beacon_time -
+ tsf_low) / beacon_interval;
+ } else
+ switch_count = 0;
+ }
+ if (switch_count <= 1)
+ cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ else {
+ switch_time_in_usec =
+ vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+ ucode_switch_time = iwl_usecs_to_beacons(priv,
+ switch_time_in_usec,
+ beacon_interval);
+ cmd.switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
+ }
+ IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+ cmd.switch_time);
+ ch_info = iwl_get_channel_info(priv, priv->band, ch);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else {
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- priv->active_rxon.channel, channel);
+ priv->active_rxon.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cpu_to_le16(channel);
+ priv->switch_rxon.channel = cmd.channel;
priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
.led = &iwlagn_led_ops,
};
+static void do_not_send_bt_config(struct iwl_priv *priv)
+{
+}
+
+static struct iwl_hcmd_ops iwl6000g2b_hcmd = {
+ .rxon_assoc = iwlagn_send_rxon_assoc,
+ .commit_rxon = iwl_commit_rxon,
+ .set_rxon_chain = iwl_set_rxon_chain,
+ .set_tx_ant = iwlagn_send_tx_ant_config,
+ .send_bt_config = do_not_send_bt_config,
+};
+
+static const struct iwl_ops iwl6000g2b_ops = {
+ .lib = &iwl6000_lib,
+ .hcmd = &iwl6000g2b_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+};
+
static struct iwl_lib_ops iwl6050_lib = {
.set_hw_params = iwl6050_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.chain_noise_calib_by_driver = true,
};
+struct iwl_cfg iwl6000g2a_2abg_cfg = {
+ .name = "6000 Series 2x2 ABG Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2a_2bg_cfg = {
+ .name = "6000 Series 2x2 BG Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2agn_cfg = {
+ .name = "6000 Series 2x2 AGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2abg_cfg = {
+ .name = "6000 Series 2x2 ABG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2bgn_cfg = {
+ .name = "6000 Series 2x2 BGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2bg_cfg = {
+ .name = "6000 Series 2x2 BG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_bgn_cfg = {
+ .name = "6000 Series 1x2 BGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_bg_cfg = {
+ .name = "6000 Series 1x2 BG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
/*
* "i": Internal configuration, use internal Power Amplifier
*/
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
git.openpandora.org / pandora-kernel.git / blobdiff