#include "iwl-prph.h"
#include "iwl-3945-hw.h"
#include "iwl-debug.h"
+#include "iwl-power.h"
+#include "iwl-dev.h"
#include "iwl-3945-led.h"
/* Highest firmware API version supported */
struct list_head list;
};
-/*
- * Generic queue structure
- *
- * Contains common data for Rx and Tx queues
- */
-struct iwl3945_queue {
- int n_bd; /* number of BDs in this queue */
- int write_ptr; /* 1-st empty entry (index) host_w*/
- int read_ptr; /* last used entry (index) host_r*/
- dma_addr_t dma_addr; /* physical addr for BD's */
- int n_window; /* safe queue window */
- u32 id;
- int low_mark; /* low watermark, resume queue if free
- * space more than this */
- int high_mark; /* high watermark, stop queue if free
- * space less than this */
-} __attribute__ ((packed));
-
-int iwl3945_queue_space(const struct iwl3945_queue *q);
-int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i);
+int iwl3945_x2_queue_used(const struct iwl_queue *q, int i);
#define MAX_NUM_OF_TBS (20)
struct sk_buff *skb[MAX_NUM_OF_TBS];
};
-/**
- * struct iwl3945_tx_queue - Tx Queue for DMA
- * @q: generic Rx/Tx queue descriptor
- * @bd: base of circular buffer of TFDs
- * @cmd: array of command/Tx buffers
- * @dma_addr_cmd: physical address of cmd/tx buffer array
- * @txb: array of per-TFD driver data
- * @need_update: indicates need to update read/write index
- *
- * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
- * descriptors) and required locking structures.
- */
-struct iwl3945_tx_queue {
- struct iwl3945_queue q;
- struct iwl3945_tfd_frame *bd;
- struct iwl3945_cmd *cmd;
- dma_addr_t dma_addr_cmd;
- struct iwl3945_tx_info *txb;
- int need_update;
- int active;
-};
-
-#define IWL_NUM_SCAN_RATES (2)
-
-struct iwl3945_channel_tgd_info {
- u8 type;
- s8 max_power;
-};
-
-struct iwl3945_channel_tgh_info {
- s64 last_radar_time;
-};
-
-/* current Tx power values to use, one for each rate for each channel.
- * requested power is limited by:
- * -- regulatory EEPROM limits for this channel
- * -- hardware capabilities (clip-powers)
- * -- spectrum management
- * -- user preference (e.g. iwconfig)
- * when requested power is set, base power index must also be set. */
-struct iwl3945_channel_power_info {
- struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_index; /* actual (compenst'd) index into gain table */
- s8 base_power_index; /* gain index for power at factory temp. */
- s8 requested_power; /* power (dBm) requested for this chnl/rate */
-};
-
-/* current scan Tx power values to use, one for each scan rate for each
- * channel. */
-struct iwl3945_scan_power_info {
- struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_index; /* actual (compenst'd) index into gain table */
- s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
-};
-
-/*
- * One for each channel, holds all channel setup data
- * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
- * with one another!
- */
-#define IWL4965_MAX_RATE (33)
-
-struct iwl3945_channel_info {
- struct iwl3945_channel_tgd_info tgd;
- struct iwl3945_channel_tgh_info tgh;
- struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
- struct iwl_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for
- * FAT channel */
-
- u8 channel; /* channel number */
- u8 flags; /* flags copied from EEPROM */
- s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
- s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */
- s8 min_power; /* always 0 */
- s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
-
- u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
- u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
- enum ieee80211_band band;
-
- /* Radio/DSP gain settings for each "normal" data Tx rate.
- * These include, in addition to RF and DSP gain, a few fields for
- * remembering/modifying gain settings (indexes). */
- struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
-
- /* Radio/DSP gain settings for each scan rate, for directed scans. */
- struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
-};
-
-struct iwl3945_clip_group {
- /* maximum power level to prevent clipping for each rate, derived by
- * us from this band's saturation power in EEPROM */
- const s8 clip_powers[IWL_MAX_RATES];
-};
-
#include "iwl-agn-rs.h"
#define IWL_TX_FIFO_AC0 0
/* Minimum number of queues. MAX_NUM is defined in hw specific files */
#define IWL_MIN_NUM_QUEUES 4
-/* Power management (not Tx power) structures */
-
-struct iwl3945_power_vec_entry {
- struct iwl_powertable_cmd cmd;
- u8 no_dtim;
-};
-#define IWL_POWER_RANGE_0 (0)
-#define IWL_POWER_RANGE_1 (1)
-
-#define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */
-#define IWL_POWER_INDEX_3 0x03
-#define IWL_POWER_INDEX_5 0x05
-#define IWL_POWER_AC 0x06
-#define IWL_POWER_BATTERY 0x07
-#define IWL_POWER_LIMIT 0x07
-#define IWL_POWER_MASK 0x0F
-#define IWL_POWER_ENABLED 0x10
-#define IWL_POWER_LEVEL(x) ((x) & IWL_POWER_MASK)
-
-struct iwl3945_power_mgr {
- spinlock_t lock;
- struct iwl3945_power_vec_entry pwr_range_0[IWL_POWER_AC];
- struct iwl3945_power_vec_entry pwr_range_1[IWL_POWER_AC];
- u8 active_index;
- u32 dtim_val;
-};
-
#define IEEE80211_DATA_LEN 2304
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
-enum {
- /* CMD_SIZE_NORMAL = 0, */
- CMD_SIZE_HUGE = (1 << 0),
- /* CMD_SYNC = 0, */
- CMD_ASYNC = (1 << 1),
- /* CMD_NO_SKB = 0, */
- CMD_WANT_SKB = (1 << 2),
-};
-
struct iwl3945_cmd;
struct iwl3945_priv;
const void *data;
};
-#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl3945_cmd) - \
+#define TFD39_MAX_PAYLOAD_SIZE (sizeof(struct iwl3945_cmd) - \
sizeof(struct iwl3945_cmd_meta))
/*
#define IWL_INVALID_RATE 0xFF
#define IWL_INVALID_VALUE -1
-struct iwl3945_tid_data {
- u16 seq_number;
-};
-
-struct iwl3945_hw_key {
- enum ieee80211_key_alg alg;
- int keylen;
- u8 key[32];
-};
-
-union iwl3945_ht_rate_supp {
- u16 rates;
- struct {
- u8 siso_rate;
- u8 mimo_rate;
- };
-};
-
-union iwl3945_qos_capabity {
- struct {
- u8 edca_count:4; /* bit 0-3 */
- u8 q_ack:1; /* bit 4 */
- u8 queue_request:1; /* bit 5 */
- u8 txop_request:1; /* bit 6 */
- u8 reserved:1; /* bit 7 */
- } q_AP;
- struct {
- u8 acvo_APSD:1; /* bit 0 */
- u8 acvi_APSD:1; /* bit 1 */
- u8 ac_bk_APSD:1; /* bit 2 */
- u8 ac_be_APSD:1; /* bit 3 */
- u8 q_ack:1; /* bit 4 */
- u8 max_len:2; /* bit 5-6 */
- u8 more_data_ack:1; /* bit 7 */
- } q_STA;
- u8 val;
-};
-
-/* QoS structures */
-struct iwl3945_qos_info {
- int qos_active;
- union iwl3945_qos_capabity qos_cap;
- struct iwl_qosparam_cmd def_qos_parm;
-};
-
#define STA_PS_STATUS_WAKE 0
#define STA_PS_STATUS_SLEEP 1
-struct iwl3945_station_entry {
- struct iwl3945_addsta_cmd sta;
- struct iwl3945_tid_data tid[MAX_TID_COUNT];
- u8 used;
- u8 ps_status;
- struct iwl3945_hw_key keyinfo;
-};
-
-/* one for each uCode image (inst/data, boot/init/runtime) */
-struct fw_desc {
- void *v_addr; /* access by driver */
- dma_addr_t p_addr; /* access by card's busmaster DMA */
- u32 len; /* bytes */
-};
-
-/* uCode file layout */
-struct iwl3945_ucode {
- __le32 ver; /* major/minor/API/serial */
- __le32 inst_size; /* bytes of runtime instructions */
- __le32 data_size; /* bytes of runtime data */
- __le32 init_size; /* bytes of initialization instructions */
- __le32 init_data_size; /* bytes of initialization data */
- __le32 boot_size; /* bytes of bootstrap instructions */
- u8 data[0]; /* data in same order as "size" elements */
-};
-
struct iwl3945_ibss_seq {
u8 mac[ETH_ALEN];
u16 seq_num;
extern u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id,
u16 tx_rate, u8 flags);
-
-#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
-
-enum {
- MEASUREMENT_READY = (1 << 0),
- MEASUREMENT_ACTIVE = (1 << 1),
-};
-
-#endif
-
#ifdef CONFIG_IWL3945_RFKILL
struct iwl3945_priv;
struct ieee80211_hw *hw;
struct ieee80211_channel *ieee_channels;
struct ieee80211_rate *ieee_rates;
- struct iwl_3945_cfg *cfg; /* device configuration */
+ struct iwl_cfg *cfg; /* device configuration */
/* temporary frame storage list */
struct list_head free_frames;
/* we allocate array of iwl3945_channel_info for NIC's valid channels.
* Access via channel # using indirect index array */
- struct iwl3945_channel_info *channel_info; /* channel info array */
+ struct iwl_channel_info *channel_info; /* channel info array */
u8 channel_count; /* # of channels */
/* each calibration channel group in the EEPROM has a derived
/* uCode images, save to reload in case of failure */
u32 ucode_ver; /* ucode version, copy of
- iwl3945_ucode.ver */
+ iwl_ucode.ver */
struct fw_desc ucode_code; /* runtime inst */
struct fw_desc ucode_data; /* runtime data original */
struct fw_desc ucode_data_backup; /* runtime data save/restore */
u16 assoc_capability;
u8 ps_mode;
- struct iwl3945_qos_info qos_data;
+ struct iwl_qos_info qos_data;
struct workqueue_struct *workqueue;
return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
}
-static inline int is_channel_valid(const struct iwl3945_channel_info *ch_info)
-{
- if (ch_info == NULL)
- return 0;
- return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
-}
-
-static inline int is_channel_radar(const struct iwl3945_channel_info *ch_info)
-{
- return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
-}
-
-static inline u8 is_channel_a_band(const struct iwl3945_channel_info *ch_info)
-{
- return ch_info->band == IEEE80211_BAND_5GHZ;
-}
-
-static inline u8 is_channel_bg_band(const struct iwl3945_channel_info *ch_info)
-{
- return ch_info->band == IEEE80211_BAND_2GHZ;
-}
-
-static inline int is_channel_passive(const struct iwl3945_channel_info *ch)
-{
- return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
-}
-
-static inline int is_channel_ibss(const struct iwl3945_channel_info *ch)
-{
- return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
-}
-
-extern const struct iwl3945_channel_info *iwl3945_get_channel_info(
+extern const struct iwl_channel_info *iwl3945_get_channel_info(
const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel);
extern int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate);