#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
#include <linux/semaphore.h>
#include <brcm_hw_ids.h>
#include <soc.h>
#include "sdio_host.h"
-#include "sdio_chip.h"
+#include "chip.h"
#include "nvram.h"
#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
/* manfid tuple length, include tuple, link bytes */
#define SBSDIO_CIS_MANFID_TUPLE_LEN 6
+#define CORE_BUS_REG(base, field) \
+ (base + offsetof(struct sdpcmd_regs, field))
+
+/* SDIO function 1 register CHIPCLKCSR */
+/* Force ALP request to backplane */
+#define SBSDIO_FORCE_ALP 0x01
+/* Force HT request to backplane */
+#define SBSDIO_FORCE_HT 0x02
+/* Force ILP request to backplane */
+#define SBSDIO_FORCE_ILP 0x04
+/* Make ALP ready (power up xtal) */
+#define SBSDIO_ALP_AVAIL_REQ 0x08
+/* Make HT ready (power up PLL) */
+#define SBSDIO_HT_AVAIL_REQ 0x10
+/* Squelch clock requests from HW */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20
+/* Status: ALP is ready */
+#define SBSDIO_ALP_AVAIL 0x40
+/* Status: HT is ready */
+#define SBSDIO_HT_AVAIL 0x80
+#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) \
+ (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
+
/* intstatus */
#define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */
#define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */
BRCMF_SDIO_FT_SUB,
};
+#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
+
+/* SDIO Pad drive strength to select value mappings */
+struct sdiod_drive_str {
+ u8 strength; /* Pad Drive Strength in mA */
+ u8 sel; /* Chip-specific select value */
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */
+static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = {
+ {32, 0x6},
+ {26, 0x7},
+ {22, 0x4},
+ {16, 0x5},
+ {12, 0x2},
+ {8, 0x3},
+ {4, 0x0},
+ {0, 0x1}
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */
+static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = {
+ {6, 0x7},
+ {5, 0x6},
+ {4, 0x5},
+ {3, 0x4},
+ {2, 0x2},
+ {1, 0x1},
+ {0, 0x0}
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */
+static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = {
+ {3, 0x3},
+ {2, 0x2},
+ {1, 0x1},
+ {0, 0x0} };
+
+/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */
+static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
+ {16, 0x7},
+ {12, 0x5},
+ {8, 0x3},
+ {4, 0x1}
+};
+
#define BCM43143_FIRMWARE_NAME "brcm/brcmfmac43143-sdio.bin"
#define BCM43143_NVRAM_NAME "brcm/brcmfmac43143-sdio.txt"
#define BCM43241B0_FIRMWARE_NAME "brcm/brcmfmac43241b0-sdio.bin"
* Reads a register in the SDIO hardware block. This block occupies a series of
* adresses on the 32 bit backplane bus.
*/
-static int
-r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
+static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
{
- u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
+ struct brcmf_core *core;
int ret;
- *regvar = brcmf_sdiod_regrl(bus->sdiodev,
- bus->ci->c_inf[idx].base + offset, &ret);
+ core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
return ret;
}
-static int
-w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
+static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
{
- u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
+ struct brcmf_core *core;
int ret;
- brcmf_sdiod_regwl(bus->sdiodev,
- bus->ci->c_inf[idx].base + reg_offset,
- regval, &ret);
+ core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
return ret;
}
brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
{
int err = 0;
- brcmf_dbg(TRACE, "Enter\n");
- brcmf_dbg(SDIO, "request %s currently %s\n",
+
+ brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
(sleep ? "SLEEP" : "WAKE"),
(bus->sleeping ? "SLEEP" : "WAKE"));
}
+#ifdef DEBUG
+static inline bool brcmf_sdio_valid_shared_address(u32 addr)
+{
+ return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
+}
+
+static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
+ struct sdpcm_shared *sh)
+{
+ u32 addr;
+ int rv;
+ u32 shaddr = 0;
+ struct sdpcm_shared_le sh_le;
+ __le32 addr_le;
+
+ shaddr = bus->ci->rambase + bus->ramsize - 4;
+
+ /*
+ * Read last word in socram to determine
+ * address of sdpcm_shared structure
+ */
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_bus_sleep(bus, false, false);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
+ sdio_release_host(bus->sdiodev->func[1]);
+ if (rv < 0)
+ return rv;
+
+ addr = le32_to_cpu(addr_le);
+
+ brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
+
+ /*
+ * Check if addr is valid.
+ * NVRAM length at the end of memory should have been overwritten.
+ */
+ if (!brcmf_sdio_valid_shared_address(addr)) {
+ brcmf_err("invalid sdpcm_shared address 0x%08X\n",
+ addr);
+ return -EINVAL;
+ }
+
+ /* Read hndrte_shared structure */
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
+ sizeof(struct sdpcm_shared_le));
+ if (rv < 0)
+ return rv;
+
+ /* Endianness */
+ sh->flags = le32_to_cpu(sh_le.flags);
+ sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
+ sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
+ sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
+ sh->assert_line = le32_to_cpu(sh_le.assert_line);
+ sh->console_addr = le32_to_cpu(sh_le.console_addr);
+ sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
+
+ if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
+ brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
+ SDPCM_SHARED_VERSION,
+ sh->flags & SDPCM_SHARED_VERSION_MASK);
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+{
+ struct sdpcm_shared sh;
+
+ if (brcmf_sdio_readshared(bus, &sh) == 0)
+ bus->console_addr = sh.console_addr;
+}
+#else
+static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+{
+}
+#endif /* DEBUG */
+
static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
{
u32 intstatus = 0;
else
brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",
bus->sdpcm_ver);
+
+ /*
+ * Retrieve console state address now that firmware should have
+ * updated it.
+ */
+ brcmf_sdio_get_console_addr(bus);
}
/*
static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
{
- u8 idx;
+ struct brcmf_core *buscore;
u32 addr;
unsigned long val;
int n, ret;
- idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
- addr = bus->ci->c_inf[idx].base +
- offsetof(struct sdpcmd_regs, intstatus);
+ buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
bus->sdcnt.f1regdata++;
}
#ifdef DEBUG
-static inline bool brcmf_sdio_valid_shared_address(u32 addr)
-{
- return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
-}
-
-static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
- struct sdpcm_shared *sh)
-{
- u32 addr;
- int rv;
- u32 shaddr = 0;
- struct sdpcm_shared_le sh_le;
- __le32 addr_le;
-
- shaddr = bus->ci->rambase + bus->ramsize - 4;
-
- /*
- * Read last word in socram to determine
- * address of sdpcm_shared structure
- */
- sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdio_bus_sleep(bus, false, false);
- rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
- sdio_release_host(bus->sdiodev->func[1]);
- if (rv < 0)
- return rv;
-
- addr = le32_to_cpu(addr_le);
-
- brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
-
- /*
- * Check if addr is valid.
- * NVRAM length at the end of memory should have been overwritten.
- */
- if (!brcmf_sdio_valid_shared_address(addr)) {
- brcmf_err("invalid sdpcm_shared address 0x%08X\n",
- addr);
- return -EINVAL;
- }
-
- /* Read hndrte_shared structure */
- rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
- sizeof(struct sdpcm_shared_le));
- if (rv < 0)
- return rv;
-
- /* Endianness */
- sh->flags = le32_to_cpu(sh_le.flags);
- sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
- sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
- sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
- sh->assert_line = le32_to_cpu(sh_le.assert_line);
- sh->console_addr = le32_to_cpu(sh_le.console_addr);
- sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
-
- if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
- brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
- SDPCM_SHARED_VERSION,
- sh->flags & SDPCM_SHARED_VERSION_MASK);
- return -EPROTO;
- }
-
- return 0;
-}
-
static int brcmf_sdio_dump_console(struct brcmf_sdio *bus,
struct sdpcm_shared *sh, char __user *data,
size_t count)
debugfs_create_file("forensics", S_IRUGO, dentry, bus,
&brcmf_sdio_forensic_ops);
brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt);
+ debugfs_create_u32("console_interval", 0644, dentry,
+ &bus->console_interval);
}
#else
static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
const struct firmware *fw)
{
int err;
- int offset;
- int address;
- int len;
brcmf_dbg(TRACE, "Enter\n");
- err = 0;
- offset = 0;
- address = bus->ci->rambase;
- while (offset < fw->size) {
- len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK :
- fw->size - offset;
- err = brcmf_sdiod_ramrw(bus->sdiodev, true, address,
- (u8 *)&fw->data[offset], len);
- if (err) {
- brcmf_err("error %d on writing %d membytes at 0x%08x\n",
- err, len, address);
- return err;
- }
- offset += len;
- address += len;
- }
- if (!err)
- if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
- (u8 *)fw->data, fw->size))
- err = -EIO;
+ err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase,
+ (u8 *)fw->data, fw->size);
+ if (err)
+ brcmf_err("error %d on writing %d membytes at 0x%08x\n",
+ err, (int)fw->size, bus->ci->rambase);
+ else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
+ (u8 *)fw->data, fw->size))
+ err = -EIO;
return err;
}
brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
/* Keep arm in reset */
- brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci);
+ brcmf_chip_enter_download(bus->ci);
fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN);
if (fw == NULL) {
}
/* Take arm out of reset */
- if (!brcmf_sdio_chip_exit_download(bus->sdiodev, bus->ci, rstvec)) {
+ if (!brcmf_chip_exit_download(bus->ci, rstvec)) {
brcmf_err("error getting out of ARM core reset\n");
goto err;
}
return bcmerror;
}
-static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus)
-{
- u32 addr, reg, pmu_cc3_mask = ~0;
- int err;
-
- brcmf_dbg(TRACE, "Enter\n");
-
- /* old chips with PMU version less than 17 don't support save restore */
- if (bus->ci->pmurev < 17)
- return false;
-
- switch (bus->ci->chip) {
- case BCM43241_CHIP_ID:
- case BCM4335_CHIP_ID:
- case BCM4339_CHIP_ID:
- /* read PMU chipcontrol register 3 */
- addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr);
- brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL);
- addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data);
- reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL);
- return (reg & pmu_cc3_mask) != 0;
- default:
- addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucapabilities_ext);
- reg = brcmf_sdiod_regrl(bus->sdiodev, addr, &err);
- if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0)
- return false;
-
- addr = CORE_CC_REG(bus->ci->c_inf[0].base, retention_ctl);
- reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL);
- return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
- PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
- }
-}
-
static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
{
int err = 0;
brcmf_dbg(TRACE, "Enter\n");
/* KSO bit added in SDIO core rev 12 */
- if (bus->ci->c_inf[1].rev < 12)
+ if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
return 0;
val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
struct brcmf_sdio *bus = sdiodev->bus;
uint pad_size;
u32 value;
- u8 idx;
int err;
/* the commands below use the terms tx and rx from
* a device perspective, ie. bus:txglom affects the
* bus transfers from device to host.
*/
- idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
- if (bus->ci->c_inf[idx].rev < 12) {
+ if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) {
/* for sdio core rev < 12, disable txgloming */
value = 0;
err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
ret = -ENODEV;
}
- if (brcmf_sdio_sr_capable(bus)) {
+ if (brcmf_chip_sr_capable(bus->ci)) {
brcmf_sdio_sr_init(bus);
} else {
/* Restore previous clock setting */
}
}
+static void
+brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
+ struct brcmf_chip *ci, u32 drivestrength)
+{
+ const struct sdiod_drive_str *str_tab = NULL;
+ u32 str_mask;
+ u32 str_shift;
+ u32 base;
+ u32 i;
+ u32 drivestrength_sel = 0;
+ u32 cc_data_temp;
+ u32 addr;
+
+ if (!(ci->cc_caps & CC_CAP_PMU))
+ return;
+
+ switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
+ case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12):
+ str_tab = sdiod_drvstr_tab1_1v8;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17):
+ str_tab = sdiod_drvstr_tab6_1v8;
+ str_mask = 0x00001800;
+ str_shift = 11;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17):
+ /* note: 43143 does not support tristate */
+ i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1;
+ if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) {
+ str_tab = sdiod_drvstr_tab2_3v3;
+ str_mask = 0x00000007;
+ str_shift = 0;
+ } else
+ brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n",
+ ci->name, drivestrength);
+ break;
+ case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13):
+ str_tab = sdiod_drive_strength_tab5_1v8;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ default:
+ brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
+ ci->name, ci->chiprev, ci->pmurev);
+ break;
+ }
+
+ if (str_tab != NULL) {
+ for (i = 0; str_tab[i].strength != 0; i++) {
+ if (drivestrength >= str_tab[i].strength) {
+ drivestrength_sel = str_tab[i].sel;
+ break;
+ }
+ }
+ base = brcmf_chip_get_chipcommon(ci)->base;
+ addr = CORE_CC_REG(base, chipcontrol_addr);
+ brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
+ cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+ cc_data_temp &= ~str_mask;
+ drivestrength_sel <<= str_shift;
+ cc_data_temp |= drivestrength_sel;
+ brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
+
+ brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
+ str_tab[i].strength, drivestrength, cc_data_temp);
+ }
+}
+
+static int brcmf_sdio_buscoreprep(void *ctx)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+ int err = 0;
+ u8 clkval, clkset;
+
+ /* Try forcing SDIO core to do ALPAvail request only */
+ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ if (err) {
+ brcmf_err("error writing for HT off\n");
+ return err;
+ }
+
+ /* If register supported, wait for ALPAvail and then force ALP */
+ /* This may take up to 15 milliseconds */
+ clkval = brcmf_sdiod_regrb(sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+
+ if ((clkval & ~SBSDIO_AVBITS) != clkset) {
+ brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
+ clkset, clkval);
+ return -EACCES;
+ }
+
+ SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+ !SBSDIO_ALPAV(clkval)),
+ PMU_MAX_TRANSITION_DLY);
+ if (!SBSDIO_ALPAV(clkval)) {
+ brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
+ clkval);
+ return -EBUSY;
+ }
+
+ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ udelay(65);
+
+ /* Also, disable the extra SDIO pull-ups */
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+
+ return 0;
+}
+
+static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
+ u32 rstvec)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+ struct brcmf_core *core;
+ u32 reg_addr;
+
+ /* clear all interrupts */
+ core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
+ reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
+ brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+
+ if (rstvec)
+ /* Write reset vector to address 0 */
+ brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
+ sizeof(rstvec));
+}
+
+static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+ u32 val, rev;
+
+ val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+ if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
+ addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
+ rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
+ if (rev >= 2) {
+ val &= ~CID_ID_MASK;
+ val |= BCM4339_CHIP_ID;
+ }
+ }
+ return val;
+}
+
+static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+
+ brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
+}
+
+static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
+ .prepare = brcmf_sdio_buscoreprep,
+ .exit_dl = brcmf_sdio_buscore_exitdl,
+ .read32 = brcmf_sdio_buscore_read32,
+ .write32 = brcmf_sdio_buscore_write32,
+};
+
static bool
brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
{
brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
/*
- * Force PLL off until brcmf_sdio_chip_attach()
+ * Force PLL off until brcmf_chip_attach()
* programs PLL control regs
*/
*/
brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
- if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) {
- brcmf_err("brcmf_sdio_chip_attach failed!\n");
+ bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
+ if (IS_ERR(bus->ci)) {
+ brcmf_err("brcmf_chip_attach failed!\n");
+ bus->ci = NULL;
goto fail;
}
drivestrength = bus->sdiodev->pdata->drive_strength;
else
drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
- brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
+ brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
/* Get info on the SOCRAM cores... */
bus->ramsize = bus->ci->ramsize;
goto fail;
/* set PMUControl so a backplane reset does PMU state reload */
- reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base,
+ reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base,
pmucontrol);
- reg_val = brcmf_sdiod_regrl(bus->sdiodev,
- reg_addr,
- &err);
+ reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
if (err)
goto fail;
reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
- brcmf_sdiod_regwl(bus->sdiodev,
- reg_addr,
- reg_val,
- &err);
+ brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
if (err)
goto fail;
-
sdio_release_host(bus->sdiodev->func[1]);
brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
/* De-register interrupt handler */
brcmf_sdiod_intr_unregister(bus->sdiodev);
- cancel_work_sync(&bus->datawork);
- if (bus->brcmf_wq)
- destroy_workqueue(bus->brcmf_wq);
-
if (bus->sdiodev->bus_if->drvr) {
brcmf_detach(bus->sdiodev->dev);
}
+ cancel_work_sync(&bus->datawork);
+ if (bus->brcmf_wq)
+ destroy_workqueue(bus->brcmf_wq);
+
if (bus->ci) {
if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
sdio_claim_host(bus->sdiodev->func[1]);
* all necessary cores.
*/
msleep(20);
- brcmf_sdio_chip_enter_download(bus->sdiodev,
- bus->ci);
+ brcmf_chip_enter_download(bus->ci);
brcmf_sdio_clkctl(bus, CLK_NONE, false);
sdio_release_host(bus->sdiodev->func[1]);
}
- brcmf_sdio_chip_detach(&bus->ci);
+ brcmf_chip_detach(bus->ci);
}
brcmu_pkt_buf_free_skb(bus->txglom_sgpad);
git.openpandora.org / pandora-kernel.git / blobdiff