*/
#include "xmit.h"
-#include "phy.h"
+#include "phy_common.h"
#include "dma.h"
#include "pio.h"
u8 *_txhdr,
const unsigned char *fragment_data,
unsigned int fragment_len,
- const struct ieee80211_tx_info *info,
+ struct ieee80211_tx_info *info,
u16 cookie)
{
struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr;
u16 phy_ctl = 0;
u8 extra_ft = 0;
struct ieee80211_rate *txrate;
+ struct ieee80211_tx_rate *rates;
memset(txhdr, 0, sizeof(*txhdr));
txrate = ieee80211_get_tx_rate(dev->wl->hw, info);
rate = txrate ? txrate->hw_value : B43_CCK_RATE_1MB;
rate_ofdm = b43_is_ofdm_rate(rate);
- fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : txrate;
+ fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : txrate;
rate_fb = fbrate->hw_value;
rate_fb_ofdm = b43_is_ofdm_rate(rate_fb);
}
/* Hardware appends ICV. */
- plcp_fragment_len += info->control.icv_len;
+ plcp_fragment_len += info->control.hw_key->icv_len;
key_idx = b43_kidx_to_fw(dev, key_idx);
mac_ctl |= (key_idx << B43_TXH_MAC_KEYIDX_SHIFT) &
mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) &
B43_TXH_MAC_KEYALG;
wlhdr_len = ieee80211_hdrlen(fctl);
- iv_len = min((size_t) info->control.iv_len,
+ iv_len = min((size_t) info->control.hw_key->iv_len,
ARRAY_SIZE(txhdr->iv));
memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
}
phy_ctl |= B43_TXH_PHY_ENC_OFDM;
else
phy_ctl |= B43_TXH_PHY_ENC_CCK;
- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
phy_ctl |= B43_TXH_PHY_SHORTPRMBL;
switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) {
B43_WARN_ON(1);
}
+ rates = info->control.rates;
/* MAC control */
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
mac_ctl |= B43_TXH_MAC_ACK;
mac_ctl |= B43_TXH_MAC_STMSDU;
if (phy->type == B43_PHYTYPE_A)
mac_ctl |= B43_TXH_MAC_5GHZ;
- if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
+
+ /* Overwrite rates[0].count to make the retry calculation
+ * in the tx status easier. need the actual retry limit to
+ * detect whether the fallback rate was used.
+ */
+ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) {
+ rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count;
mac_ctl |= B43_TXH_MAC_LONGFRAME;
+ } else {
+ rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count;
+ }
/* Generate the RTS or CTS-to-self frame */
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
+ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) {
unsigned int len;
struct ieee80211_hdr *hdr;
int rts_rate, rts_rate_fb;
rts_rate_fb = b43_calc_fallback_rate(rts_rate);
rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb);
- if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
struct ieee80211_cts *cts;
if (b43_is_old_txhdr_format(dev)) {
int adjust_2053, int adjust_2050)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
s32 tmp;
switch (phy->radio_ver) {
boardflags_lo & B43_BFL_RSSI) {
if (in_rssi > 63)
in_rssi = 63;
- tmp = phy->nrssi_lt[in_rssi];
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+ tmp = gphy->nrssi_lt[in_rssi];
tmp = 31 - tmp;
tmp *= -131;
tmp /= 128;
b43_pio_handle_txstatus(dev, status);
else
b43_dma_handle_txstatus(dev, status);
+
+ b43_phy_txpower_check(dev, 0);
}
/* Fill out the mac80211 TXstatus report based on the b43-specific
* txstatus report data. This returns a boolean whether the frame was
* successfully transmitted. */
-bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
+bool b43_fill_txstatus_report(struct b43_wldev *dev,
+ struct ieee80211_tx_info *report,
const struct b43_txstatus *status)
{
bool frame_success = 1;
+ int retry_limit;
+
+ /* preserve the confiured retry limit before clearing the status
+ * The xmit function has overwritten the rc's value with the actual
+ * retry limit done by the hardware */
+ retry_limit = report->status.rates[0].count;
+ ieee80211_tx_info_clear_status(report);
if (status->acked) {
/* The frame was ACKed. */
if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) {
/* ...but we expected an ACK. */
frame_success = 0;
- report->status.excessive_retries = 1;
}
}
if (status->frame_count == 0) {
/* The frame was not transmitted at all. */
- report->status.retry_count = 0;
- } else
- report->status.retry_count = status->frame_count - 1;
+ report->status.rates[0].count = 0;
+ } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
+ /*
+ * If the short retries (RTS, not data frame) have exceeded
+ * the limit, the hw will not have tried the selected rate,
+ * but will have used the fallback rate instead.
+ * Don't let the rate control count attempts for the selected
+ * rate in this case, otherwise the statistics will be off.
+ */
+ report->status.rates[0].count = 0;
+ report->status.rates[1].count = status->frame_count;
+ } else {
+ if (status->frame_count > retry_limit) {
+ report->status.rates[0].count = retry_limit;
+ report->status.rates[1].count = status->frame_count -
+ retry_limit;
+
+ } else {
+ report->status.rates[0].count = status->frame_count;
+ report->status.rates[1].idx = -1;
+ }
+ }
return frame_success;
}