<http://www.tldp.org/docs.html#howto>. Some more specific
information is contained in
<file:Documentation/networking/wavelan.txt> and in the source code
- <file:drivers/net/wavelan.p.h>.
+ <file:drivers/net/wireless/wavelan.p.h>.
You will also need the wireless tools package available from
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
config LIBERTAS
tristate "Marvell 8xxx Libertas WLAN driver support"
depends on WLAN_80211
+ select WIRELESS_EXT
select IEEE80211
select FW_LOADER
---help---
---help---
A driver for Marvell Libertas 8385 CompactFlash devices.
+config LIBERTAS_SDIO
+ tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
+ depends on LIBERTAS && MMC
+ ---help---
+ A driver for Marvell Libertas 8385 and 8686 SDIO devices.
+
config LIBERTAS_DEBUG
bool "Enable full debugging output in the Libertas module."
depends on LIBERTAS
Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
- PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+ IPW2011, and Symbol Spectrum24 High Rate amongst others.
This option includes the guts of the driver, but in order to
actually use a card you will also need to enable support for PCMCIA
To compile this driver as a module, choose M here: the
module will be called zd1201.
+config USB_NET_RNDIS_WLAN
+ tristate "Wireless RNDIS USB support"
+ depends on USB && WLAN_80211 && EXPERIMENTAL
+ select USB_USBNET
+ select USB_NET_CDCETHER
+ select USB_NET_RNDIS_HOST
+ select WIRELESS_EXT
+ ---help---
+ This is a driver for wireless RNDIS devices.
+ These are USB based adapters found in devices such as:
+
+ Buffalo WLI-U2-KG125S
+ U.S. Robotics USR5421
+ Belkin F5D7051
+ Linksys WUSB54GSv2
+ Linksys WUSB54GSC
+ Asus WL169gE
+ Eminent EM4045
+ BT Voyager 1055
+ Linksys WUSB54GSv1
+ U.S. Robotics USR5420
+ BUFFALO WLI-USB-G54
+
+ All of these devices are based on Broadcom 4320 chip which is the
+ only wireless RNDIS chip known to date.
+
+ If you choose to build a module, it'll be called rndis_wlan.
+
+config RTL8180
+ tristate "Realtek 8180/8185 PCI support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8180 and RTL8185 based cards.
+ These are PCI based chips found in cards such as:
+
+ (RTL8185 802.11g)
+ A-Link WL54PC
+
+ (RTL8180 802.11b)
+ Belkin F5D6020 v3
+ Belkin F5D6020 v3
+ Dlink DWL-610
+ Dlink DWL-510
+ Netgear MA521
+ Level-One WPC-0101
+ Acer Aspire 1357 LMi
+ VCTnet PC-11B1
+ Ovislink AirLive WL-1120PCM
+ Mentor WL-PCI
+ Linksys WPC11 v4
+ TrendNET TEW-288PI
+ D-Link DWL-520 Rev D
+ Repotec RP-WP7126
+ TP-Link TL-WN250/251
+ Zonet ZEW1000
+ Longshine LCS-8031-R
+ HomeLine HLW-PCC200
+ GigaFast WF721-AEX
+ Planet WL-3553
+ Encore ENLWI-PCI1-NT
+ TrendNET TEW-266PC
+ Gigabyte GN-WLMR101
+ Siemens-fujitsu Amilo D1840W
+ Edimax EW-7126
+ PheeNet WL-11PCIR
+ Tonze PC-2100T
+ Planet WL-8303
+ Dlink DWL-650 v M1
+ Edimax EW-7106
+ Q-Tec 770WC
+ Topcom Skyr@cer 4011b
+ Roper FreeLan 802.11b (edition 2004)
+ Wistron Neweb Corp CB-200B
+ Pentagram HorNET
+ QTec 775WC
+ TwinMOS Booming B Series
+ Micronet SP906BB
+ Sweex LC700010
+ Surecom EP-9428
+ Safecom SWLCR-1100
+
+ Thanks to Realtek for their support!
+
config RTL8187
tristate "Realtek 8187 USB support"
depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
config P54_COMMON
tristate "Softmac Prism54 support"
depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
+ ---help---
+ This is common code for isl38xx based cards.
+ This module does nothing by itself - the USB/PCI frontends
+ also need to be enabled in order to support any devices.
+
+ These devices require softmac firmware which can be found at
+ http://prism54.org/
+
+ If you choose to build a module, it'll be called p54common.
config P54_USB
tristate "Prism54 USB support"
depends on P54_COMMON && USB
select CRC32
+ ---help---
+ This driver is for USB isl38xx based wireless cards.
+ These are USB based adapters found in devices such as:
+
+ 3COM 3CRWE254G72
+ SMC 2862W-G
+ Accton 802.11g WN4501 USB
+ Siemens Gigaset USB
+ Netgear WG121
+ Netgear WG111
+ Medion 40900, Roper Europe
+ Shuttle PN15, Airvast WM168g, IOGear GWU513
+ Linksys WUSB54G
+ Linksys WUSB54G Portable
+ DLink DWL-G120 Spinnaker
+ DLink DWL-G122
+ Belkin F5D7050 ver 1000
+ Cohiba Proto board
+ SMC 2862W-G version 2
+ U.S. Robotics U5 802.11g Adapter
+ FUJITSU E-5400 USB D1700
+ Sagem XG703A
+ DLink DWL-G120 Cohiba
+ Spinnaker Proto board
+ Linksys WUSB54AG
+ Inventel UR054G
+ Spinnaker DUT
+
+ These devices require softmac firmware which can be found at
+ http://prism54.org/
+
+ If you choose to build a module, it'll be called p54usb.
config P54_PCI
tristate "Prism54 PCI support"
depends on P54_COMMON && PCI
+ ---help---
+ This driver is for PCI isl38xx based wireless cards.
+ This driver supports most devices that are supported by the
+ fullmac prism54 driver plus many devices which are not
+ supported by the fullmac driver/firmware.
+
+ This driver requires softmac firmware which can be found at
+ http://prism54.org/
+
+ If you choose to build a module, it'll be called p54pci.
+
+config ATH5K
+ tristate "Atheros 5xxx wireless cards support"
+ depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ ---help---
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
+
+ Currently the following chip versions are supported:
+
+ MAC: AR5211 AR5212
+ PHY: RF5111/2111 RF5112/2112 RF5413/2413
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ If you choose to build a module, it'll be called ath5k. Say M if
+ unsure.
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
git.openpandora.org / pandora-kernel.git / blobdiff