#include "dwmac100.h"
#include "dwmac_dma.h"
-static int dwmac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
+static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx,
u32 dma_rx)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
+ int limit;
+
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+ limit = 15000;
+ while (limit--) {
+ if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
+ break;
+ }
+ if (limit < 0)
+ return -EBUSY;
/* Enable Application Access by writing to DMA CSR0 */
writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
/* Store and Forward capability is not used at all..
* The transmit threshold can be programmed by
* setting the TTC bits in the DMA control register.*/
-static void dwmac100_dma_operation_mode(unsigned long ioaddr, int txmode,
+static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode,
int rxmode)
{
u32 csr6 = readl(ioaddr + DMA_CONTROL);
writel(csr6, ioaddr + DMA_CONTROL);
}
-static void dwmac100_dump_dma_regs(unsigned long ioaddr)
+static void dwmac100_dump_dma_regs(void __iomem *ioaddr)
{
int i;
/* DMA controller has two counters to track the number of
* the receive missed frames. */
static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
- unsigned long ioaddr)
+ void __iomem *ioaddr)
{
struct net_device_stats *stats = (struct net_device_stats *)data;
u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
}
}
-struct stmmac_dma_ops dwmac100_dma_ops = {
+const struct stmmac_dma_ops dwmac100_dma_ops = {
.init = dwmac100_dma_init,
.dump_regs = dwmac100_dump_dma_regs,
.dma_mode = dwmac100_dma_operation_mode,