sfc: Implement message level control

[pandora-kernel.git] / drivers / net / sfc / qt202x_phy.c

diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index e077bef..68813d1 100644 (file)
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -91,9 +91,10 @@ static int qt2025c_wait_heartbeat(struct efx_nic *efx)
                if (time_after(jiffies, timeout)) {
                        /* Some cables have EEPROMs that conflict with the
                         * PHY's on-board EEPROM so it cannot load firmware */
-                       EFX_ERR(efx, "If an SFP+ direct attach cable is"
-                               " connected, please check that it complies"
-                               " with the SFP+ specification\n");
+                       netif_err(efx, hw, efx->net_dev,
+                                 "If an SFP+ direct attach cable is"
+                                 " connected, please check that it complies"
+                                 " with the SFP+ specification\n");
                        return -ETIMEDOUT;
                }
                msleep(QT2025C_HEARTB_WAIT);
@@ -145,7 +146,8 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
                /* Bug 17689: occasionally heartbeat starts but firmware status
                 * code never progresses beyond 0x00.  Try again, once, after
                 * restarting execution of the firmware image. */
-               EFX_LOG(efx, "bashing QT2025C microcontroller\n");
+               netif_dbg(efx, hw, efx->net_dev,
+                         "bashing QT2025C microcontroller\n");
                qt2025c_restart_firmware(efx);
                rc = qt2025c_wait_heartbeat(efx);
                if (rc != 0)
@@ -165,11 +167,12 @@ static void qt2025c_firmware_id(struct efx_nic *efx)
        for (i = 0; i < sizeof(firmware_id); i++)
                firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS,
                                               PCS_FW_PRODUCT_CODE_1 + i);
-       EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
-                (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
-                firmware_id[3] >> 4, firmware_id[3] & 0xf,
-                firmware_id[4], firmware_id[5],
-                firmware_id[6], firmware_id[7], firmware_id[8]);
+       netif_info(efx, probe, efx->net_dev,
+                  "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
+                  (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
+                  firmware_id[3] >> 4, firmware_id[3] & 0xf,
+                  firmware_id[4], firmware_id[5],
+                  firmware_id[6], firmware_id[7], firmware_id[8]);
        phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) |
                                 ((firmware_id[3] & 0x0f) << 16) |
                                 (firmware_id[4] << 8) | firmware_id[5];
@@ -198,7 +201,7 @@ static void qt2025c_bug17190_workaround(struct efx_nic *efx)
        }
 
        if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
-               EFX_LOG(efx, "bashing QT2025C PMA/PMD\n");
+               netif_dbg(efx, hw, efx->net_dev, "bashing QT2025C PMA/PMD\n");
                efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
                                  MDIO_PMA_CTRL1_LOOPBACK, true);
                msleep(100);
@@ -231,7 +234,8 @@ static int qt2025c_select_phy_mode(struct efx_nic *efx)
        reg = efx_mdio_read(efx, 1, 0xc319);
        if ((reg & 0x0038) == phy_op_mode)
                return 0;
-       EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode);
+       netif_dbg(efx, hw, efx->net_dev, "Switching PHY to mode 0x%04x\n",
+                 phy_op_mode);
 
        /* This sequence replicates the register writes configured in the boot
         * EEPROM (including the differences between board revisions), except
@@ -287,8 +291,9 @@ static int qt2025c_select_phy_mode(struct efx_nic *efx)
        /* Wait for the microcontroller to be ready again */
        rc = qt2025c_wait_reset(efx);
        if (rc < 0) {
-               EFX_ERR(efx, "PHY microcontroller reset during mode switch "
-                               "timed out\n");
+               netif_err(efx, hw, efx->net_dev,
+                         "PHY microcontroller reset during mode switch "
+                         "timed out\n");
                return rc;
        }
 
@@ -324,7 +329,7 @@ static int qt202x_reset_phy(struct efx_nic *efx)
        return 0;
 
  fail:
-       EFX_ERR(efx, "PHY reset timed out\n");
+       netif_err(efx, hw, efx->net_dev, "PHY reset timed out\n");
        return rc;
 }
 
@@ -353,14 +358,15 @@ static int qt202x_phy_init(struct efx_nic *efx)
 
        rc = qt202x_reset_phy(efx);
        if (rc) {
-               EFX_ERR(efx, "PHY init failed\n");
+               netif_err(efx, probe, efx->net_dev, "PHY init failed\n");
                return rc;
        }
 
        devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
-       EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
-                devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
-                efx_mdio_id_rev(devid));
+       netif_info(efx, probe, efx->net_dev,
+                  "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
+                  devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
+                  efx_mdio_id_rev(devid));
 
        if (efx->phy_type == PHY_TYPE_QT2025C)
                qt2025c_firmware_id(efx);