Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

[pandora-kernel.git] / drivers / net / s2io.c

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 1a4979f..458daa0 100644 (file)
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -63,6 +63,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/mdio.h>
 #include <linux/skbuff.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -1763,7 +1764,7 @@ static int init_nic(struct s2io_nic *nic)
                 * by then we return error.
                 */
                time = 0;
-               while (TRUE) {
+               while (true) {
                        val64 = readq(&bar0->rti_command_mem);
                        if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
                                break;
@@ -2136,7 +2137,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
 
        herc = (sp->device_type == XFRAME_II_DEVICE);
 
-       if (flag == FALSE) {
+       if (flag == false) {
                if ((!herc && (sp->pdev->revision >= 4)) || herc) {
                        if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
                                ret = 1;
@@ -3328,9 +3329,9 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
        struct stat_block *stat_info = sp->mac_control.stats_info;
 
        /* Check the communication with the MDIO slave */
-       addr = 0x0000;
+       addr = MDIO_CTRL1;
        val64 = 0x0;
-       val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+       val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
        if((val64 == 0xFFFF) || (val64 == 0x0000))
        {
                DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
@@ -3338,24 +3339,24 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
                return;
        }
 
-       /* Check for the expecte value of 2040 at PMA address 0x0000 */
-       if(val64 != 0x2040)
+       /* Check for the expected value of control reg 1 */
+       if(val64 != MDIO_CTRL1_SPEED10G)
        {
                DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
-               DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
-                         (unsigned long long)val64);
+               DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n",
+                         (unsigned long long)val64, MDIO_CTRL1_SPEED10G);
                return;
        }
 
        /* Loading the DOM register to MDIO register */
        addr = 0xA100;
-       s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
-       val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+       s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
+       val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
        /* Reading the Alarm flags */
        addr = 0xA070;
        val64 = 0x0;
-       val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+       val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
        flag = CHECKBIT(val64, 0x7);
        type = 1;
@@ -3387,7 +3388,7 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
        /* Reading the Warning flags */
        addr = 0xA074;
        val64 = 0x0;
-       val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+       val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
        if(CHECKBIT(val64, 0x7))
                stat_info->xpak_stat.warn_transceiver_temp_high++;
@@ -3586,7 +3587,7 @@ static void s2io_reset(struct s2io_nic * sp)
                writeq(val64, &bar0->pcc_err_reg);
        }
 
-       sp->device_enabled_once = FALSE;
+       sp->device_enabled_once = false;
 }
 
 /**
@@ -4298,7 +4299,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
                s2io_stop_tx_queue(sp, fifo->fifo_no);
        }
        mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
-       dev->trans_start = jiffies;
        spin_unlock_irqrestore(&fifo->tx_lock, flags);
 
        if (sp->config.intr_type == MSI_X)
@@ -5572,10 +5572,10 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
 
        val64 = readq(&bar0->rmac_pause_cfg);
        if (val64 & RMAC_PAUSE_GEN_ENABLE)
-               ep->tx_pause = TRUE;
+               ep->tx_pause = true;
        if (val64 & RMAC_PAUSE_RX_ENABLE)
-               ep->rx_pause = TRUE;
-       ep->autoneg = FALSE;
+               ep->rx_pause = true;
+       ep->autoneg = false;
 }
 
 /**
@@ -6806,7 +6806,7 @@ static void s2io_set_link(struct work_struct *work)
                                        val64 |= ADAPTER_LED_ON;
                                        writeq(val64, &bar0->adapter_control);
                                }
-                               nic->device_enabled_once = TRUE;
+                               nic->device_enabled_once = true;
                        } else {
                                DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
                                DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
@@ -7754,7 +7754,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
        struct s2io_nic *sp;
        struct net_device *dev;
        int i, j, ret;
-       int dma_flag = FALSE;
+       int dma_flag = false;
        u32 mac_up, mac_down;
        u64 val64 = 0, tmp64 = 0;
        struct XENA_dev_config __iomem *bar0 = NULL;
@@ -7777,7 +7777,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 
        if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
                DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
-               dma_flag = TRUE;
+               dma_flag = true;
                if (pci_set_consistent_dma_mask
                    (pdev, DMA_BIT_MASK(64))) {
                        DBG_PRINT(ERR_DBG,
@@ -7818,7 +7818,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
        sp->dev = dev;
        sp->pdev = pdev;
        sp->high_dma_flag = dma_flag;
-       sp->device_enabled_once = FALSE;
+       sp->device_enabled_once = false;
        if (rx_ring_mode == 1)
                sp->rxd_mode = RXD_MODE_1;
        if (rx_ring_mode == 2)
@@ -7964,7 +7964,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 
        dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-       if (sp->high_dma_flag == TRUE)
+       if (sp->high_dma_flag == true)
                dev->features |= NETIF_F_HIGHDMA;
        dev->features |= NETIF_F_TSO;
        dev->features |= NETIF_F_TSO6;