#include "ixgbe_common.h"
#include "ixgbe_phy.h"
+static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
-static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data);
/**
- * ixgbe_identify_phy - Get physical layer module
+ * ixgbe_identify_phy_generic - Get physical layer module
* @hw: pointer to hardware structure
*
* Determines the physical layer module found on the current adapter.
**/
-s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
u32 phy_addr;
- for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
- if (ixgbe_validate_phy_addr(hw, phy_addr)) {
- hw->phy.addr = phy_addr;
- ixgbe_get_phy_id(hw);
- hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
- status = 0;
- break;
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+ hw->phy.addr = phy_addr;
+ ixgbe_get_phy_id(hw);
+ hw->phy.type =
+ ixgbe_get_phy_type_from_id(hw->phy.id);
+ status = 0;
+ break;
+ }
}
+ } else {
+ status = 0;
}
+
return status;
}
bool valid = false;
hw->phy.addr = phy_addr;
- ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_PHY_ID_HIGH,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
if (phy_id != 0xFFFF && phy_id != 0x0)
valid = true;
u16 phy_id_high = 0;
u16 phy_id_low = 0;
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_PHY_ID_HIGH,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id_high);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_high);
if (status == 0) {
hw->phy.id = (u32)(phy_id_high << 16);
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_PHY_ID_LOW,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id_low);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_low);
hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
}
-
return status;
}
enum ixgbe_phy_type phy_type;
switch (phy_id) {
- case TN1010_PHY_ID:
- phy_type = ixgbe_phy_tn;
- break;
case QT2022_PHY_ID:
phy_type = ixgbe_phy_qt;
break;
}
/**
- * ixgbe_reset_phy - Performs a PHY reset
+ * ixgbe_reset_phy_generic - Performs a PHY reset
* @hw: pointer to hardware structure
**/
-s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
{
/*
* Perform soft PHY reset to the PHY_XS.
* This will cause a soft reset to the PHY
*/
- return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
- IXGBE_MDIO_PHY_XS_DEV_TYPE,
- IXGBE_MDIO_PHY_XS_RESET);
+ return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ IXGBE_MDIO_PHY_XS_RESET);
}
/**
- * ixgbe_read_phy_reg - Reads a value from a specified PHY register
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
* @phy_data: Pointer to read data from PHY register
**/
-s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data)
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
{
u32 command;
u32 i;
- u32 timeout = 10;
u32 data;
s32 status = 0;
u16 gssr;
if (status == 0) {
/* Setup and write the address cycle command */
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* The MDI Command bit will clear when the operation is
* complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
* command
*/
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* completed. The MDI Command bit will clear when the
* operation is complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw,
- "PHY read command didn't complete\n");
+ hw_dbg(hw, "PHY read command didn't complete\n");
status = IXGBE_ERR_PHY;
} else {
/*
ixgbe_release_swfw_sync(hw, gssr);
}
+
return status;
}
/**
- * ixgbe_write_phy_reg - Writes a value to specified PHY register
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit PHY register to write
* @device_type: 5 bit device type
* @phy_data: Data to write to the PHY register
**/
-static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data)
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
{
u32 command;
u32 i;
- u32 timeout = 10;
s32 status = 0;
u16 gssr;
/* Setup and write the address cycle command */
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* The MDI Command bit will clear when the operation is
* complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
- hw_dbg(hw, "PHY address cmd didn't complete\n");
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
- }
}
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
status = IXGBE_ERR_PHY;
+ }
if (status == 0) {
/*
* command
*/
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* completed. The MDI Command bit will clear when the
* operation is complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
- hw_dbg(hw, "PHY write command did not "
- "complete.\n");
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
- }
}
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
status = IXGBE_ERR_PHY;
+ }
}
ixgbe_release_swfw_sync(hw, gssr);
}
/**
- * ixgbe_setup_tnx_phy_link - Set and restart autoneg
+ * ixgbe_setup_phy_link_generic - Set and restart autoneg
* @hw: pointer to hardware structure
*
* Restart autonegotiation and PHY and waits for completion.
**/
-s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
{
s32 status = IXGBE_NOT_IMPLEMENTED;
u32 time_out;
u32 max_time_out = 10;
- u16 autoneg_speed_selection_register = 0x10;
- u16 autoneg_restart_mask = 0x0200;
- u16 autoneg_complete_mask = 0x0020;
- u16 autoneg_reg = 0;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
/*
* Set advertisement settings in PHY based on autoneg_advertised
* settings. If autoneg_advertised = 0, then advertise default values
- * txn devices cannot be "forced" to a autoneg 10G and fail. But can
+ * tnx devices cannot be "forced" to a autoneg 10G and fail. But can
* for a 1G.
*/
- ixgbe_read_phy_reg(hw,
- autoneg_speed_selection_register,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
else
autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
- ixgbe_write_phy_reg(hw,
- autoneg_speed_selection_register,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
-
+ hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
/* Restart PHY autonegotiation and wait for completion */
- ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
- autoneg_reg |= autoneg_restart_mask;
+ autoneg_reg |= IXGBE_MII_RESTART;
- ixgbe_write_phy_reg(hw,
- IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
/* Wait for autonegotiation to finish */
for (time_out = 0; time_out < max_time_out; time_out++) {
udelay(10);
/* Restart PHY autonegotiation and wait for completion */
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- autoneg_reg &= autoneg_complete_mask;
- if (autoneg_reg == autoneg_complete_mask) {
+ autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
+ if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
status = 0;
break;
}
}
/**
- * ixgbe_check_tnx_phy_link - Determine link and speed status
- * @hw: pointer to hardware structure
- *
- * Reads the VS1 register to determine if link is up and the current speed for
- * the PHY.
- **/
-s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up)
-{
- s32 status = 0;
- u32 time_out;
- u32 max_time_out = 10;
- u16 phy_link = 0;
- u16 phy_speed = 0;
- u16 phy_data = 0;
-
- /* Initialize speed and link to default case */
- *link_up = false;
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /*
- * Check current speed and link status of the PHY register.
- * This is a vendor specific register and may have to
- * be changed for other copper PHYs.
- */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
- *link_up = true;
- if (phy_speed ==
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- break;
- } else {
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
- IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
- &phy_data);
- phy_link = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
- phy_speed = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
- }
- }
-
- return status;
-}
-
-/**
- * ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
+ * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if autonegotiation enabled
**/
-s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
{
+
/*
* Clear autoneg_advertised and set new values based on input link
* speed.
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
/* Setup link based on the new speed settings */
- ixgbe_setup_tnx_phy_link(hw);
+ hw->phy.ops.setup_link(hw);
return 0;
}
+
git.openpandora.org / pandora-kernel.git / blobdiff