Information and updates available at
http://www.scyld.com/network/epic100.html
+ [this link no longer provides anything useful -jgarzik]
---------------------------------------------------------------------
- Linux kernel-specific changes:
-
- LK1.1.2 (jgarzik):
- * Merge becker version 1.09 (4/08/2000)
-
- LK1.1.3:
- * Major bugfix to 1.09 driver (Francis Romieu)
-
- LK1.1.4 (jgarzik):
- * Merge becker test version 1.09 (5/29/2000)
-
- LK1.1.5:
- * Fix locking (jgarzik)
- * Limit 83c175 probe to ethernet-class PCI devices (rgooch)
-
- LK1.1.6:
- * Merge becker version 1.11
- * Move pci_enable_device before any PCI BAR len checks
-
- LK1.1.7:
- * { fill me in }
-
- LK1.1.8:
- * ethtool driver info support (jgarzik)
-
- LK1.1.9:
- * ethtool media get/set support (jgarzik)
-
- LK1.1.10:
- * revert MII transceiver init change (jgarzik)
-
- LK1.1.11:
- * implement ETHTOOL_[GS]SET, _NWAY_RST, _[GS]MSGLVL, _GLINK (jgarzik)
- * replace some MII-related magic numbers with constants
-
- LK1.1.12:
- * fix power-up sequence
-
- LK1.1.13:
- * revert version 1.1.12, power-up sequence "fix"
-
- LK1.1.14 (Kryzsztof Halasa):
- * fix spurious bad initializations
- * pound phy a la SMSC's app note on the subject
-
- AC1.1.14ac
- * fix power up/down for ethtool that broke in 1.11
-
*/
#define DRV_NAME "epic100"
-#define DRV_VERSION "1.11+LK1.1.14+AC1.1.14"
-#define DRV_RELDATE "June 2, 2004"
+#define DRV_VERSION "2.1"
+#define DRV_RELDATE "Sept 11, 2006"
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
struct epic_chip_info {
const char *name;
- int io_size; /* Needed for I/O region check or ioremap(). */
int drv_flags; /* Driver use, intended as capability flags. */
};
/* indexed by chip_t */
static const struct epic_chip_info pci_id_tbl[] = {
- { "SMSC EPIC/100 83c170",
- EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN },
- { "SMSC EPIC/100 83c170",
- EPIC_TOTAL_SIZE, TYPE2_INTR },
- { "SMSC EPIC/C 83c175",
- EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN },
+ { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
+ { "SMSC EPIC/100 83c170", TYPE2_INTR },
+ { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
};
static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int epic_rx(struct net_device *dev, int budget);
static int epic_poll(struct net_device *dev, int *budget);
-static irqreturn_t epic_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static irqreturn_t epic_interrupt(int irq, void *dev_instance);
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static struct ethtool_ops netdev_ethtool_ops;
+static const struct ethtool_ops netdev_ethtool_ops;
static int epic_close(struct net_device *dev);
static struct net_device_stats *epic_get_stats(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
goto out;
irq = pdev->irq;
- if (pci_resource_len(pdev, 0) < pci_id_tbl[chip_idx].io_size) {
- printk (KERN_ERR "card %d: no PCI region space\n", card_idx);
+ if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
+ dev_err(&pdev->dev, "no PCI region space\n");
ret = -ENODEV;
goto err_out_disable;
}
dev = alloc_etherdev(sizeof (*ep));
if (!dev) {
- printk (KERN_ERR "card %d: no memory for eth device\n", card_idx);
+ dev_err(&pdev->dev, "no memory for eth device\n");
goto err_out_free_res;
}
SET_MODULE_OWNER(dev);
ioaddr = pci_resource_start (pdev, 1);
ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
if (!ioaddr) {
- printk (KERN_ERR DRV_NAME " %d: ioremap failed\n", card_idx);
+ dev_err(&pdev->dev, "ioremap failed\n");
goto err_out_free_netdev;
}
#endif
((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4));
if (debug > 2) {
- printk(KERN_DEBUG DRV_NAME "(%s): EEPROM contents\n",
- pci_name(pdev));
+ dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
for (i = 0; i < 64; i++)
printk(" %4.4x%s", read_eeprom(ioaddr, i),
i % 16 == 15 ? "\n" : "");
int mii_status = mdio_read(dev, phy, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
ep->phys[phy_idx++] = phy;
- printk(KERN_INFO DRV_NAME "(%s): MII transceiver #%d control "
- "%4.4x status %4.4x.\n",
- pci_name(pdev), phy, mdio_read(dev, phy, 0), mii_status);
+ dev_info(&pdev->dev,
+ "MII transceiver #%d control "
+ "%4.4x status %4.4x.\n",
+ phy, mdio_read(dev, phy, 0), mii_status);
}
}
ep->mii_phy_cnt = phy_idx;
if (phy_idx != 0) {
phy = ep->phys[0];
ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
- printk(KERN_INFO DRV_NAME "(%s): Autonegotiation advertising %4.4x link "
+ dev_info(&pdev->dev,
+ "Autonegotiation advertising %4.4x link "
"partner %4.4x.\n",
- pci_name(pdev), ep->mii.advertising, mdio_read(dev, phy, 5));
+ ep->mii.advertising, mdio_read(dev, phy, 5));
} else if ( ! (ep->chip_flags & NO_MII)) {
- printk(KERN_WARNING DRV_NAME "(%s): ***WARNING***: No MII transceiver found!\n",
- pci_name(pdev));
+ dev_warn(&pdev->dev,
+ "***WARNING***: No MII transceiver found!\n");
/* Use the known PHY address of the EPII. */
ep->phys[0] = 3;
}
/* The lower four bits are the media type. */
if (duplex) {
ep->mii.force_media = ep->mii.full_duplex = 1;
- printk(KERN_INFO DRV_NAME "(%s): Forced full duplex operation requested.\n",
- pci_name(pdev));
+ dev_info(&pdev->dev, "Forced full duplex requested.\n");
}
dev->if_port = ep->default_port = option;
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
-static irqreturn_t epic_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+static irqreturn_t epic_interrupt(int irq, void *dev_instance)
{
struct net_device *dev = dev_instance;
struct epic_private *ep = dev->priv;
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
outl(0x002C, ioaddr + RxCtrl);
/* Unconditionally log net taps. */
- printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
memset(mc_filter, 0xff, sizeof(mc_filter));
} else if ((dev->mc_count > 0) || (dev->flags & IFF_ALLMULTI)) {
/* There is apparently a chip bug, so the multicast filter
}
}
-static struct ethtool_ops netdev_ethtool_ops = {
+static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
.get_settings = netdev_get_settings,
.set_settings = netdev_set_settings,
version, version2, version3);
#endif
- return pci_module_init (&epic_driver);
+ return pci_register_driver(&epic_driver);
}