KVM: VMX: Avoid atomic operation in vmx_vcpu_run

[pandora-kernel.git] / drivers / net / cs89x0.c

diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index d325e01..537a4b2 100644 (file)
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -95,6 +95,9 @@
   Dmitry Pervushin  : dpervushin@ru.mvista.com
                     : PNX010X platform support
 
+  Domenico Andreoli : cavokz@gmail.com
+                    : QQ2440 platform support
+
 */
 
 /* Always include 'config.h' first in case the user wants to turn on
@@ -176,6 +179,10 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_IXDP2X01)
 static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_MACH_QQ2440)
+#include <mach/qq2440.h>
+static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
+static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
 #elif defined(CONFIG_MACH_MX31ADS)
 #include <mach/board-mx31ads.h>
 static unsigned int netcard_portlist[] __used __initdata = {
@@ -521,6 +528,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 #endif
                lp->force = g_cs89x0_media__force;
 #endif
+
+#if defined(CONFIG_MACH_QQ2440)
+               lp->force |= FORCE_RJ45 | FORCE_FULL;
+#endif
         }
 
        /* Grab the region so we can find another board if autoIRQ fails. */
@@ -943,10 +954,10 @@ skip_this_frame:
 static void __init reset_chip(struct net_device *dev)
 {
 #if !defined(CONFIG_MACH_MX31ADS)
-#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
+#if !defined(CS89x0_NONISA_IRQ)
        struct net_local *lp = netdev_priv(dev);
        int ioaddr = dev->base_addr;
-#endif
+#endif /* CS89x0_NONISA_IRQ */
        int reset_start_time;
 
        writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
@@ -954,7 +965,7 @@ static void __init reset_chip(struct net_device *dev)
        /* wait 30 ms */
        msleep(30);
 
-#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
+#if !defined(CS89x0_NONISA_IRQ)
        if (lp->chip_type != CS8900) {
                /* Hardware problem requires PNP registers to be reconfigured after a reset */
                writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT);
@@ -965,7 +976,7 @@ static void __init reset_chip(struct net_device *dev)
                outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
                outb((dev->mem_start >> 8) & 0xff,   ioaddr + DATA_PORT + 1);
        }
-#endif /* IXDP2x01 */
+#endif /* CS89x0_NONISA_IRQ */
 
        /* Wait until the chip is reset */
        reset_start_time = jiffies;