* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.62.00-6"
-#define DRV_MODULE_RELDATE "2011/01/30"
+#define DRV_MODULE_VERSION "1.62.11-0"
+#define DRV_MODULE_RELDATE "2011/01/31"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
#define BNX2X_NEW_NAPI
#if defined(CONFIG_DCB)
-#define BCM_DCB
+#define BCM_DCBNL
#endif
#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
#define BCM_CNIC 1
#endif
#define bnx2x_mc_addr(ha) ((ha)->addr)
+#define bnx2x_uc_addr(ha) ((ha)->addr)
#define U64_LO(x) (u32)(((u64)(x)) & 0xffffffff)
#define U64_HI(x) (u32)(((u64)(x)) >> 32)
/* chip independed shortcut into rx_prods_offset memory */
u32 ustorm_rx_prods_offset;
+ u32 rx_buf_size;
+
dma_addr_t status_blk_mapping;
struct sw_tx_bd *tx_buf_ring;
};
#define bnx2x_fp(bp, nr, var) (bp->fp[nr].var)
+
+/* Use 2500 as a mini-jumbo MTU for FCoE */
+#define BNX2X_FCOE_MINI_JUMBO_MTU 2500
+
#ifdef BCM_CNIC
/* FCoE L2 `fastpath' is right after the eth entries */
#define FCOE_IDX BNX2X_NUM_ETH_QUEUES(bp)
struct eth_stats_query fw_stats;
struct mac_configuration_cmd mac_config;
struct mac_configuration_cmd mcast_config;
+ struct mac_configuration_cmd uc_mac_config;
struct client_init_ramrod_data client_init_data;
/* used by dmae command executer */
int tx_ring_size;
u32 rx_csum;
- u32 rx_buf_size;
/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
#define ETH_OVREHEAD (ETH_HLEN + 8 + 8)
#define ETH_MIN_PACKET_SIZE 60
struct eth_spe *spq_prod_bd;
struct eth_spe *spq_last_bd;
__le16 *dsb_sp_prod;
- atomic_t spq_left; /* serialize spq */
+ atomic_t cq_spq_left; /* ETH_XXX ramrods credit */
/* used to synchronize spq accesses */
spinlock_t spq_lock;
u16 eq_prod;
u16 eq_cons;
__le16 *eq_cons_sb;
+ atomic_t eq_spq_left; /* COMMON_XXX ramrods credit */
/* Flags for marking that there is a STAT_QUERY or
SET_MAC ramrod pending */
#define MF_FUNC_DIS 0x1000
#define FCOE_MACS_SET 0x2000
#define NO_FCOE_FLAG 0x4000
+#define NO_ISCSI_OOO_FLAG 0x8000
+#define NO_ISCSI_FLAG 0x10000
#define NO_FCOE(bp) ((bp)->flags & NO_FCOE_FLAG)
+#define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG)
+#define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG)
int pf_num; /* absolute PF number */
int pfid; /* per-path PF number */
int num_queues;
int disable_tpa;
int int_mode;
+ u32 *rx_indir_table;
struct tstorm_eth_mac_filter_config mac_filters;
#define BNX2X_ACCEPT_NONE 0x0000
#define BNX2X_CNIC_FLAG_MAC_SET 1
void *t2;
dma_addr_t t2_mapping;
- struct cnic_ops *cnic_ops;
+ struct cnic_ops __rcu *cnic_ops;
void *cnic_data;
u32 cnic_tag;
struct cnic_eth_dev cnic_eth_dev;
u16 cnic_kwq_pending;
u16 cnic_spq_pending;
struct mutex cnic_mutex;
- u8 iscsi_mac[ETH_ALEN];
u8 fip_mac[ETH_ALEN];
#endif
int dmae_ready;
/* used to synchronize dmae accesses */
- struct mutex dmae_mutex;
+ spinlock_t dmae_lock;
/* used to protect the FW mail box */
struct mutex fw_mb_mutex;
struct bnx2x_dcbx_port_params dcbx_port_params;
int dcb_version;
- /* DCBX Negotation results */
+ /* DCBX Negotiation results */
struct dcbx_features dcbx_local_feat;
u32 dcbx_error;
u32 pending_max;
void bnx2x_calc_fc_adv(struct bnx2x *bp);
int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
u32 data_hi, u32 data_lo, int common);
+
+/* Clears multicast and unicast list configuration in the chip. */
+void bnx2x_invalidate_e1_mc_list(struct bnx2x *bp);
+void bnx2x_invalidate_e1h_mc_list(struct bnx2x *bp);
+void bnx2x_invalidate_uc_list(struct bnx2x *bp);
+
void bnx2x_update_coalesce(struct bnx2x *bp);
int bnx2x_get_link_cfg_idx(struct bnx2x *bp);
BNX2X_EXTERN int load_count[2][3]; /* per path: 0-common, 1-port0, 2-port1 */
extern void bnx2x_set_ethtool_ops(struct net_device *netdev);
+void bnx2x_push_indir_table(struct bnx2x *bp);
#endif /* bnx2x.h */