pandora: update defconfig

[pandora-kernel.git] / drivers / net / arcnet / Kconfig

diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 948de25..3b2f7f1 100644 (file)
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -2,10 +2,8 @@
 # Arcnet configuration
 #
 
-menu "ARCnet devices"
+menuconfig ARCNET
        depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
        tristate "ARCnet support"
        ---help---
          If you have a network card of this type, say Y and check out the
@@ -21,13 +19,13 @@ config ARCNET
          from <http://www.tldp.org/docs.html#howto>(even though ARCnet
          is not really Ethernet).
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module will
+         To compile this driver as a module, choose M here. The module will
          be called arcnet.
 
+if ARCNET
+
 config ARCNET_1201
        tristate "Enable standard ARCNet packet format (RFC 1201)"
-       depends on ARCNET
        help
          This allows you to use RFC1201 with your ARCnet card via the virtual
          arc0 device.  You need to say Y here to communicate with
@@ -38,7 +36,6 @@ config ARCNET_1201
 
 config ARCNET_1051
        tristate "Enable old ARCNet packet format (RFC 1051)"
-       depends on ARCNET
        ---help---
          This allows you to use RFC1051 with your ARCnet card via the virtual
          arc0s device. You only need arc0s if you want to talk to ARCnet
@@ -53,7 +50,6 @@ config ARCNET_1051
 
 config ARCNET_RAW
        tristate "Enable raw mode packet interface"
-       depends on ARCNET
        help
          ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
          to work unless talking to a copy of the same Linux arcnet driver,
@@ -61,17 +57,16 @@ config ARCNET_RAW
 
 config ARCNET_CAP
        tristate "Enable CAP mode packet interface"
-       depends on ARCNET
        help
          ARCnet "cap mode" packet encapsulation. Used to get the hardware
           acknowledge back to userspace. After the initial protocol byte every
           packet is stuffed with an extra 4 byte "cookie" which doesn't
           actually appear on the network. After transmit the driver will send
           back a packet with protocol byte 0 containing the status of the
-          transmition:
+          transmission:
              0=no hardware acknowledge
              1=excessive nak
-             2=transmition accepted by the reciever hardware
+             2=transmission accepted by the receiver hardware
 
           Received packets are also stuffed with the extra 4 bytes but it will
           be random data.
@@ -80,52 +75,44 @@ config ARCNET_CAP
 
 config ARCNET_COM90xx
        tristate "ARCnet COM90xx (normal) chipset driver"
-       depends on ARCNET
        help
          This is the chipset driver for the standard COM90xx cards. If you
          have always used the old ARCnet driver without knowing what type of
          card you had, this is probably the one for you.
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module will
+         To compile this driver as a module, choose M here. The module will
          be called com90xx.
 
 config ARCNET_COM90xxIO
        tristate "ARCnet COM90xx (IO mapped) chipset driver"
-       depends on ARCNET
        ---help---
          This is the chipset driver for the COM90xx cards, using them in
          IO-mapped mode instead of memory-mapped mode. This is slower than
          the normal driver. Only use it if your card doesn't support shared
          memory.
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module will
+         To compile this driver as a module, choose M here. The module will
          be called com90io.
 
 config ARCNET_RIM_I
        tristate "ARCnet COM90xx (RIM I) chipset driver"
-       depends on ARCNET
        ---help---
          This is yet another chipset driver for the COM90xx cards, but this
          time only using memory-mapped mode, and no IO ports at all. This
          driver is completely untested, so if you have one of these cards,
          please mail <dwmw2@infradead.org>, especially if it works!
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module will
+         To compile this driver as a module, choose M here. The module will
          be called arc-rimi.
 
 config ARCNET_COM20020
        tristate "ARCnet COM20020 chipset driver"
-       depends on ARCNET
        help
          This is the driver for the new COM20020 chipset. It supports such
          things as promiscuous mode, so packet sniffing is possible, and
          extra diagnostic information.
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module will
+         To compile this driver as a module, choose M here. The module will
          be called com20020.
 
 config ARCNET_COM20020_ISA
@@ -136,5 +123,4 @@ config ARCNET_COM20020_PCI
        tristate "Support for COM20020 on PCI"
        depends on ARCNET_COM20020 && PCI
 
-endmenu
-
+endif # ARCNET