ehea: Fix missing Kconfig dependency

[pandora-kernel.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 389980f..a64bb41 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -90,6 +90,11 @@ config MACVLAN
          This allows one to create virtual interfaces that map packets to
          or from specific MAC addresses to a particular interface.
 
+         Macvlan devices can be added using the "ip" command from the
+         iproute2 package starting with the iproute2-2.6.23 release:
+
+         "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
          To compile this driver as a module, choose M here: the module
          will be called macvlan.
 
@@ -814,8 +819,8 @@ config ULTRA32
          will be called smc-ultra32.
 
 config BFIN_MAC
-       tristate "Blackfin 536/537 on-chip mac support"
-       depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H)
+       tristate "Blackfin 527/536/537 on-chip mac support"
+       depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H)
        select CRC32
        select MII
        select PHYLIB
@@ -828,7 +833,7 @@ config BFIN_MAC
 
 config BFIN_MAC_USE_L1
        bool "Use L1 memory for rx/tx packets"
-       depends on BFIN_MAC && BF537
+       depends on BFIN_MAC && (BF527 || BF537)
        default y
        help
          To get maximum network performance, you should use L1 memory as rx/tx buffers.
@@ -855,7 +860,8 @@ config BFIN_RX_DESC_NUM
 config BFIN_MAC_RMII
        bool "RMII PHY Interface (EXPERIMENTAL)"
        depends on BFIN_MAC && EXPERIMENTAL
-       default n
+       default y if BFIN527_EZKIT
+       default n if BFIN537_STAMP
        help
          Use Reduced PHY MII Interface
 
@@ -878,7 +884,8 @@ config SMC91X
        tristate "SMC 91C9x/91C1xxx support"
        select CRC32
        select MII
-       depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
+       depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+               SOC_AU1X00 || BLACKFIN || MN10300
        help
          This is a driver for SMC's 91x series of Ethernet chipsets,
          including the SMC91C94 and the SMC91C111. Say Y if you want it
@@ -919,8 +926,7 @@ config ENC28J60
        ---help---
          Support for the Microchip EN28J60 ethernet chip.
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module will be
+         To compile this driver as a module, choose M here. The module will be
          called enc28j60.
 
 config ENC28J60_WRITEVERIFY
@@ -930,6 +936,14 @@ config ENC28J60_WRITEVERIFY
          Enable the verify after the buffer write useful for debugging purpose.
          If unsure, say N.
 
+config DM9000_DEBUGLEVEL
+       int "DM9000 maximum debug level"
+       depends on DM9000
+       default 4
+       help
+         The maximum level of debugging code compiled into the DM9000
+         driver.
+
 config SMC911X
        tristate "SMSC LAN911[5678] support"
        select CRC32
@@ -1199,7 +1213,7 @@ config NE2_MCA
 
 config IBMLANA
        tristate "IBM LAN Adapter/A support"
-       depends on MCA && MCA_LEGACY
+       depends on MCA
        ---help---
          This is a Micro Channel Ethernet adapter.  You need to set
          CONFIG_MCA to use this driver.  It is both available as an in-kernel
@@ -1737,10 +1751,8 @@ config SC92031
 
 config CPMAC
        tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-       depends on NET_ETHERNET && EXPERIMENTAL && AR7
+       depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
        select PHYLIB
-       select FIXED_PHY
-       select FIXED_MII_100_FDX
        help
          TI AR7 CPMAC Ethernet support
 
@@ -2040,8 +2052,7 @@ config IGB
          More specific information on configuring the driver is in
          <file:Documentation/networking/e1000.txt>.
 
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>.  The module
+         To compile this driver as a module, choose M here. The module
          will be called igb.
 
 source "drivers/net/ixp2000/Kconfig"
@@ -2354,6 +2365,17 @@ config GELIC_NET
          To compile this driver as a module, choose M here: the
          module will be called ps3_gelic.
 
+config GELIC_WIRELESS
+       bool "PS3 Wireless support"
+       depends on GELIC_NET
+       select WIRELESS_EXT
+       help
+        This option adds the support for the wireless feature of PS3.
+        If you have the wireless-less model of PS3 or have no plan to
+        use wireless feature, disabling this option saves memory.  As
+        the driver automatically distinguishes the models, you can
+        safely enable this option even if you have a wireless-less model.
+
 config GIANFAR
        tristate "Gianfar Ethernet"
        depends on FSL_SOC
@@ -2497,7 +2519,7 @@ config CHELSIO_T3
 
 config EHEA
        tristate "eHEA Ethernet support"
-       depends on IBMEBUS && INET
+       depends on IBMEBUS && INET && SPARSEMEM
        select INET_LRO
        ---help---
          This driver supports the IBM pSeries eHEA ethernet adapter.
@@ -3113,6 +3135,7 @@ config VIRTIO_NET
        tristate "Virtio network driver (EXPERIMENTAL)"
        depends on EXPERIMENTAL && VIRTIO
        ---help---
-         This is the virtual network driver for lguest.  Say Y or M.
+         This is the virtual network driver for virtio.  It can be used with
+          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
 endif # NETDEVICES