Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

[pandora-kernel.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f499a3b..30b3671 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -447,6 +447,7 @@ config MIPS_GT96100ETH
 config MIPS_AU1X00_ENET
        bool "MIPS AU1000 Ethernet support"
        depends on NET_ETHERNET && SOC_AU1X00
+       select PHYLIB
        select CRC32
        help
          If you have an Alchemy Semi AU1X00 based system
@@ -853,6 +854,17 @@ config SMC9194
          <file:Documentation/networking/net-modules.txt>. The module
          will be called smc9194.
 
+config NET_NETX
+       tristate "NetX Ethernet support"
+       select MII
+       depends on NET_ETHERNET && ARCH_NETX
+       help
+         This is support for the Hilscher netX builtin Ethernet ports
+
+         To compile this driver as a module, choose M here and read
+         <file:Documentation/networking/net-modules.txt>. The module
+         will be called netx-eth.
+
 config DM9000
        tristate "DM9000 support"
        depends on (ARM || MIPS) && NET_ETHERNET
@@ -869,7 +881,7 @@ config SMC911X
        tristate "SMSC LAN911[5678] support"
        select CRC32
        select MII
-       depends on NET_ETHERNET
+       depends on NET_ETHERNET && ARCH_PXA
        help
          This is a driver for SMSC's LAN911x series of Ethernet chipsets
          including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -1375,8 +1387,8 @@ config APRICOT
          called apricot.
 
 config B44
-       tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
-       depends on NET_PCI && PCI && EXPERIMENTAL
+       tristate "Broadcom 4400 ethernet support"
+       depends on NET_PCI && PCI
        select MII
        help
          If you have a network (Ethernet) controller of this type, say Y and
@@ -1712,6 +1724,20 @@ config VIA_RHINE_MMIO
 
          If unsure, say Y.
 
+config VIA_RHINE_NAPI
+       bool "Use Rx Polling (NAPI)"
+       depends on VIA_RHINE
+       help
+         NAPI is a new driver API designed to reduce CPU and interrupt load
+         when the driver is receiving lots of packets from the card.
+
+         If your estimated Rx load is 10kpps or more, or if the card will be
+         deployed on potentially unfriendly networks (e.g. in a firewall),
+         then say Y here.
+
+         See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+         information.
+
 config LAN_SAA9730
        bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)"
        depends on NET_PCI && EXPERIMENTAL && MIPS
@@ -2179,6 +2205,8 @@ config TIGON3
 config BNX2
        tristate "Broadcom NetXtremeII support"
        depends on PCI
+       select CRC32
+       select ZLIB_INFLATE
        help
          This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
 
@@ -2187,7 +2215,7 @@ config BNX2
 
 config SPIDER_NET
        tristate "Spider Gigabit Ethernet driver"
-       depends on PCI && PPC_CELL
+       depends on PCI && PPC_IBM_CELL_BLADE
        select FW_LOADER
        help
          This driver supports the Gigabit Ethernet chips present on the
@@ -2195,16 +2223,43 @@ config SPIDER_NET
 
 config GIANFAR
        tristate "Gianfar Ethernet"
-       depends on 85xx || 83xx
+       depends on 85xx || 83xx || PPC_86xx
        select PHYLIB
        help
-         This driver supports the Gigabit TSEC on the MPC85xx 
-         family of chips, and the FEC on the 8540
+         This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+         and MPC86xx family of chips, and the FEC on the 8540.
 
 config GFAR_NAPI
        bool "NAPI Support"
        depends on GIANFAR
 
+config UCC_GETH
+       tristate "Freescale QE UCC GETH"
+       depends on QUICC_ENGINE && UCC_FAST
+       help
+         This driver supports the Gigabit Ethernet mode of QE UCC.
+         QE can be found on MPC836x CPUs.
+
+config UGETH_NAPI
+       bool "NAPI Support"
+       depends on UCC_GETH
+
+config UGETH_MAGIC_PACKET
+       bool "Magic Packet detection support"
+       depends on UCC_GETH
+
+config UGETH_FILTERING
+       bool "Mac address filtering support"
+       depends on UCC_GETH
+
+config UGETH_TX_ON_DEMOND
+       bool "Transmit on Demond support"
+       depends on UCC_GETH
+
+config UGETH_HAS_GIGA
+       bool
+       depends on UCC_GETH && MPC836x
+
 config MV643XX_ETH
        tristate "MV-643XX Ethernet support"
        depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM