config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH
- select CRC32
- select MII
+ select PHYLIB
+ select MDIO_BITBANG
help
AX88796 driver, using platform bus to provide
chip detection and resources
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS)
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
config CS89x0_NONISA_IRQ
def_bool y
depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
- MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
+ IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC
+ default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
select PHYLIB
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
This driver supports the ethernet MACs in the Broadcom 63xx
MIPS chipset family (BCM63XX).
+config FTMAC100
+ tristate "Faraday FTMAC100 10/100 Ethernet support"
+ depends on ARM
+ select MII
+ help
+ This driver supports the FTMAC100 10/100 Ethernet controller
+ from Faraday. It is used on Faraday A320, Andes AG101 and some
+ other ARM/NDS32 SoC's.
+
+config LANTIQ_ETOP
+ tristate "Lantiq SoC ETOP driver"
+ depends on SOC_TYPE_XWAY
+ help
+ Support for the MII0 inside the Lantiq SoC
+
+
source "drivers/net/fs_enet/Kconfig"
source "drivers/net/octeon/Kconfig"
config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+ select CRC32
depends on PCI && (!SPARC32 || BROKEN)
+ select CRC32
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config R8169_VLAN
- bool "VLAN support"
- depends on R8169 && VLAN_8021Q
- ---help---
- Say Y here for the r8169 driver to support the functions required
- by the kernel 802.1Q code.
-
- If in doubt, say Y.
-
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
source "drivers/net/stmmac/Kconfig"
config PCH_GBE
- tristate "PCH Gigabit Ethernet"
+ tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
depends on PCI
select MII
---help---
to Gigabit Ethernet.
This driver enables Gigabit Ethernet function.
+ This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+ Output Hub), ML7223.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7223 is companion chip for Intel Atom E6xx series.
+ ML7223 is completely compatible for Intel EG20T PCH.
+
endif # NETDEV_1000
#
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
-config CHELSIO_T3_DEPENDS
- tristate
- depends on PCI && INET
- default y
-
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
- depends on CHELSIO_T3_DEPENDS
+ depends on PCI && INET
select FW_LOADER
select MDIO
help
To compile this driver as a module, choose M here: the module
will be called cxgb3.
-config CHELSIO_T4_DEPENDS
- tristate
- depends on PCI && INET
- default y
-
config CHELSIO_T4
tristate "Chelsio Communications T4 Ethernet support"
- depends on CHELSIO_T4_DEPENDS
+ depends on PCI
select FW_LOADER
select MDIO
help
To compile this driver as a module choose M here; the module
will be called cxgb4.
-config CHELSIO_T4VF_DEPENDS
- tristate
- depends on PCI && INET
- default y
-
config CHELSIO_T4VF
tristate "Chelsio Communications T4 Virtual Function Ethernet support"
- depends on CHELSIO_T4VF_DEPENDS
+ depends on PCI
help
This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
adapters with PCI-E SR-IOV Virtual Functions.
select XEN_XENBUS_FRONTEND
default y
help
- The network device frontend driver allows the kernel to
- access network devices exported exported by a virtual
- machine containing a physical network device driver. The
- frontend driver is intended for unprivileged guest domains;
- if you are compiling a kernel for a Xen guest, you almost
- certainly want to enable this.
+ This driver provides support for Xen paravirtual network
+ devices exported by a Xen network driver domain (often
+ domain 0).
+
+ The corresponding Linux backend driver is enabled by the
+ CONFIG_XEN_NETDEV_BACKEND option.
+
+ If you are compiling a kernel for use as Xen guest, you
+ should say Y here. To compile this driver as a module, chose
+ M here: the module will be called xen-netfront.
+
+config XEN_NETDEV_BACKEND
+ tristate "Xen backend network device"
+ depends on XEN_BACKEND
+ help
+ This driver allows the kernel to act as a Xen network driver
+ domain which exports paravirtual network devices to other
+ Xen domains. These devices can be accessed by any operating
+ system that implements a compatible front end.
+
+ The corresponding Linux frontend driver is enabled by the
+ CONFIG_XEN_NETDEV_FRONTEND configuration option.
+
+ The backend driver presents a standard network device
+ endpoint for each paravirtual network device to the driver
+ domain network stack. These can then be bridged or routed
+ etc in order to provide full network connectivity.
+
+ If you are compiling a kernel to run in a Xen network driver
+ domain (often this is domain 0) you should say Y here. To
+ compile this driver as a module, chose M here: the module
+ will be called xen-netback.
config ISERIES_VETH
tristate "iSeries Virtual Ethernet driver support"
git.openpandora.org / pandora-kernel.git / blobdiff