/*
- * linux/drivers/mmc/at91_mci.c - ATMEL AT91RM9200 MCI Driver
+ * linux/drivers/mmc/at91_mci.c - ATMEL AT91 MCI Driver
*
* Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
*
*/
/*
- This is the AT91RM9200 MCI driver that has been tested with both MMC cards
+ This is the AT91 MCI driver that has been tested with both MMC cards
and SD-cards. Boards that support write protect are now supported.
The CCAT91SBC001 board does not support SD cards.
controller to manage the transfers.
A read is done from the controller directly to the scatterlist passed in from the request.
- Due to a bug in the controller, when a read is completed, all the words are byte
- swapped in the scatterlist buffers.
+ Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
+ swapped in the scatterlist buffers. AT91SAM926x are not affected by this bug.
The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
#include <asm/irq.h>
#include <asm/mach/mmc.h>
#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_mci.h>
#include <asm/arch/at91_pdc.h>
for (i = 0; i < len; i++) {
struct scatterlist *sg;
int amount;
- int index;
unsigned int *sgbuffer;
sg = &data->sg[i];
sgbuffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
amount = min(size, sg->length);
size -= amount;
- amount /= 4;
- for (index = 0; index < amount; index++)
- *dmabuf++ = swab32(sgbuffer[index]);
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
+ int index;
+
+ for (index = 0; index < (amount / 4); index++)
+ *dmabuf++ = swab32(sgbuffer[index]);
+ }
+ else
+ memcpy(dmabuf, sgbuffer, amount);
kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
while (host->in_use_index < host->transfer_index) {
unsigned int *buffer;
- int index;
- int len;
struct scatterlist *sg;
data->bytes_xfered += sg->length;
- len = sg->length / 4;
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
+ int index;
- for (index = 0; index < len; index++) {
- buffer[index] = swab32(buffer[index]);
+ for (index = 0; index < (sg->length / 4); index++)
+ buffer[index] = swab32(buffer[index]);
}
+
kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
flush_dcache_page(sg->page);
}
at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
- at91_mci_write(host, AT91_MCI_SDCR, 0);
+
+ /* use Slot A or B (only one at same time) */
+ at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
}
/*
if (host->board->vcc_pin) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
- at91_set_gpio_output(host->board->vcc_pin, 0);
+ at91_set_gpio_value(host->board->vcc_pin, 0);
break;
case MMC_POWER_UP:
case MMC_POWER_ON:
- at91_set_gpio_output(host->board->vcc_pin, 1);
+ at91_set_gpio_value(host->board->vcc_pin, 1);
break;
}
}
present ? "insert" : "remove");
if (!present) {
pr_debug("****** Resetting SD-card bus width ******\n");
- at91_mci_write(host, AT91_MCI_SDCR, 0);
+ at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
}
mmc_detect_change(host->mmc, msecs_to_jiffies(100));
}
return IRQ_HANDLED;
}
-int at91_mci_get_ro(struct mmc_host *mmc)
+static int at91_mci_get_ro(struct mmc_host *mmc)
{
int read_only = 0;
struct at91mci_host *host = mmc_priv(mmc);
/*
* Probe for the device
*/
-static int at91_mci_probe(struct platform_device *pdev)
+static int __init at91_mci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct at91mci_host *host;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_BYTEBLOCK;
+ mmc->max_blk_size = 4095;
+ mmc->max_blk_count = mmc->max_req_size;
+
host = mmc_priv(mmc);
host->mmc = mmc;
host->buffer = NULL;
/*
* Remove a device
*/
-static int at91_mci_remove(struct platform_device *pdev)
+static int __exit at91_mci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct at91mci_host *host;
#endif
static struct platform_driver at91_mci_driver = {
- .probe = at91_mci_probe,
- .remove = at91_mci_remove,
+ .remove = __exit_p(at91_mci_remove),
.suspend = at91_mci_suspend,
.resume = at91_mci_resume,
.driver = {
static int __init at91_mci_init(void)
{
- return platform_driver_register(&at91_mci_driver);
+ return platform_driver_probe(&at91_mci_driver, at91_mci_probe);
}
static void __exit at91_mci_exit(void)