/* #define ENABLE_DEBUG_ISOC_FRAMES */
static unsigned int core_debug;
-module_param(core_debug,int,0644);
-MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
#define em28xx_coredbg(fmt, arg...) do {\
if (core_debug) \
dev->name, __func__ , ##arg); } while (0)
static unsigned int reg_debug;
-module_param(reg_debug,int,0644);
-MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
+module_param(reg_debug, int, 0644);
+MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
#define em28xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
return -EINVAL;
if (reg_debug) {
- printk( KERN_DEBUG "(pipe 0x%08x): "
+ printk(KERN_DEBUG "(pipe 0x%08x): "
"IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
pipe,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
if (reg_debug) {
int byte;
- printk( KERN_DEBUG "(pipe 0x%08x): "
+ printk(KERN_DEBUG "(pipe 0x%08x): "
"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
pipe,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
}
}
+ if (dev->board.mute_gpio && dev->mute)
+ em28xx_gpio_set(dev, dev->board.mute_gpio);
+ else
+ em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
+
ret = em28xx_write_reg_bits(dev, EM28XX_R0E_AUDIOSRC, input, 0xc0);
if (ret < 0)
return ret;
xclk = dev->board.xclk & 0x7f;
if (!dev->mute)
- xclk |= 0x80;
+ xclk |= EM28XX_XCLK_AUDIO_UNMUTE;
ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
if (ret < 0)
if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
int sel = ac97_return_record_select(dev->ctl_aoutput);
- /* Use the same input for both left and right channels */
+ /* Use the same input for both left and right
+ channels */
sel |= (sel << 8);
em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
/* it seems that both H and V scalers must be active
to work correctly */
- mode = (h || v)? 0x30: 0x00;
+ mode = (h || v) ? 0x30 : 0x00;
}
return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
}
struct em28xx *dev = container_of(dma_q, struct em28xx, vidq);
int rc, i;
+ switch (urb->status) {
+ case 0: /* success */
+ case -ETIMEDOUT: /* NAK */
+ break;
+ case -ECONNRESET: /* kill */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default: /* error */
+ em28xx_isocdbg("urb completition error %d.\n", urb->status);
+ break;
+ }
+
/* Copy data from URB */
spin_lock(&dev->slock);
rc = dev->isoc_ctl.isoc_copy(dev, urb);
em28xx_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
- in_interrupt()?" while in int":"");
+ in_interrupt() ? " while in int" : "");
em28xx_uninit_isoc(dev);
return -ENOMEM;
}
em28xx_irq_callback, dma_q, 1);
urb->number_of_packets = max_packets;
- urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
k = 0;
for (j = 0; j < max_packets; j++) {
*/
void em28xx_wake_i2c(struct em28xx *dev)
{
- struct v4l2_routing route;
- int zero = 0;
-
- route.input = INPUT(dev->ctl_input)->vmux;
- route.output = 0;
- em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
- em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
- em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
+ INPUT(dev->ctl_input)->vmux, 0, 0);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
}
/*