V4L/DVB (7574): mt312: Add support for zl10313 demod

[pandora-kernel.git] / drivers / media / dvb / frontends / mt312.c

diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 1f478c8..e17a361 100644 (file)
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -1,7 +1,8 @@
 /*
-    Driver for Zarlink VP310/MT312 Satellite Channel Decoder
+    Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
 
     Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
+    Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -55,6 +56,7 @@ static int debug;
        } while (0)
 
 #define MT312_PLL_CLK          10000000UL      /* 10 MHz */
+#define MT312_PLL_CLK_10_111   10111000UL      /* 10.111 MHz */
 
 static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
                      u8 *buf, const size_t count)
@@ -264,6 +266,32 @@ static int mt312_initfe(struct dvb_frontend *fe)
                        return ret;
        }
 
+       switch (state->id) {
+       case ID_ZL10313:
+               /* enable ADC */
+               ret = mt312_writereg(state, GPP_CTRL, 0x80);
+               if (ret < 0)
+                       return ret;
+
+               /* configure ZL10313 for optimal ADC performance */
+               buf[0] = 0x80;
+               buf[1] = 0xB0;
+               ret = mt312_write(state, HW_CTRL, buf, 2);
+               if (ret < 0)
+                       return ret;
+
+               /* enable MPEG output and ADCs */
+               ret = mt312_writereg(state, HW_CTRL, 0x00);
+               if (ret < 0)
+                       return ret;
+
+               ret = mt312_writereg(state, MPEG_CTRL, 0x00);
+               if (ret < 0)
+                       return ret;
+
+               break;
+       }
+
        /* SYS_CLK */
        buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
 
@@ -278,7 +306,17 @@ static int mt312_initfe(struct dvb_frontend *fe)
        if (ret < 0)
                return ret;
 
-       ret = mt312_writereg(state, OP_CTRL, 0x53);
+       /* different MOCLK polarity */
+       switch (state->id) {
+       case ID_ZL10313:
+               buf[0] = 0x33;
+               break;
+       default:
+               buf[0] = 0x53;
+               break;
+       }
+
+       ret = mt312_writereg(state, OP_CTRL, buf[0]);
        if (ret < 0)
                return ret;
 
@@ -552,6 +590,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe,
                break;
 
        case ID_MT312:
+       case ID_ZL10313:
                break;
 
        default:
@@ -617,11 +656,29 @@ static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 {
        struct mt312_state *state = fe->demodulator_priv;
 
-       if (enable) {
-               return mt312_writereg(state, GPP_CTRL, 0x40);
-       } else {
-               return mt312_writereg(state, GPP_CTRL, 0x00);
+       u8 val = 0x00;
+       int ret;
+
+       switch (state->id) {
+       case ID_ZL10313:
+               ret = mt312_readreg(state, GPP_CTRL, &val);
+               if (ret < 0)
+                       goto error;
+
+               /* preserve this bit to not accidently shutdown ADC */
+               val &= 0x80;
+               break;
        }
+
+       if (enable)
+               val |= 0x40;
+       else
+               val &= ~0x40;
+
+       ret = mt312_writereg(state, GPP_CTRL, val);
+
+error:
+       return ret;
 }
 
 static int mt312_sleep(struct dvb_frontend *fe)
@@ -635,6 +692,18 @@ static int mt312_sleep(struct dvb_frontend *fe)
        if (ret < 0)
                return ret;
 
+       if (state->id == ID_ZL10313) {
+               /* reset ADC */
+               ret = mt312_writereg(state, GPP_CTRL, 0x00);
+               if (ret < 0)
+                       return ret;
+
+               /* full shutdown of ADCs, mpeg bus tristated */
+               ret = mt312_writereg(state, HW_CTRL, 0x0d);
+               if (ret < 0)
+                       return ret;
+       }
+
        ret = mt312_readreg(state, CONFIG, &config);
        if (ret < 0)
                return ret;
@@ -736,8 +805,13 @@ struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config,
                state->xtal = MT312_PLL_CLK;
                state->freq_mult = 6;
                break;
+       case ID_ZL10313:
+               strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
+               state->xtal = MT312_PLL_CLK_10_111;
+               state->freq_mult = 9;
+               break;
        default:
-               printk(KERN_WARNING "Only Zarlink VP310/MT312"
+               printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
                        " are supported chips.\n");
                goto error;
        }
@@ -753,7 +827,7 @@ EXPORT_SYMBOL(vp310_mt312_attach);
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
-MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
+MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
 MODULE_LICENSE("GPL");