*/
#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include "ipath_common.h"
/* rcvhdrq base, needs mmap before useful */
void *port_rcvhdrq;
/* kernel virtual address where hdrqtail is updated */
- volatile __le64 *port_rcvhdrtail_kvaddr;
+ void *port_rcvhdrtail_kvaddr;
/*
* temp buffer for expected send setup, allocated at open, instead
* of each setup call
void *l_arg;
};
+struct ipath_skbinfo {
+ struct sk_buff *skb;
+ dma_addr_t phys;
+};
+
struct ipath_devdata {
struct list_head ipath_list;
/* ipath_cfgports pointers */
struct ipath_portdata **ipath_pd;
/* sk_buffs used by port 0 eager receive queue */
- struct sk_buff **ipath_port0_skbs;
+ struct ipath_skbinfo *ipath_port0_skbinfo;
/* kvirt address of 1st 2k pio buffer */
void __iomem *ipath_pio2kbase;
/* kvirt address of 1st 4k pio buffer */
u8 ipath_ht_slave_off;
/* for write combining settings */
unsigned long ipath_wc_cookie;
+ unsigned long ipath_wc_base;
+ unsigned long ipath_wc_len;
/* ref count for each pkey */
atomic_t ipath_pkeyrefs[4];
/* shadow copy of all exptids physaddr; used only by funcsim */
u64 *ipath_tidsimshadow;
/* shadow copy of struct page *'s for exp tid pages */
struct page **ipath_pageshadow;
+ /* shadow copy of dma handles for exp tid pages */
+ dma_addr_t *ipath_physshadow;
/* lock to workaround chip bug 9437 */
spinlock_t ipath_tid_lock;
u32 ipath_lli_counter;
/* local link integrity errors */
u32 ipath_lli_errors;
+ /*
+ * Above counts only cases where _successive_ LocalLinkIntegrity
+ * errors were seen in the receive headers of kern-packets.
+ * Below are the three (monotonically increasing) counters
+ * maintained via GPIO interrupts on iba6120-rev2.
+ */
+ u32 ipath_rxfc_unsupvl_errs;
+ u32 ipath_overrun_thresh_errs;
+ u32 ipath_lli_errs;
+
+ /*
+ * Not all devices managed by a driver instance are the same
+ * type, so these fields must be per-device.
+ */
+ u64 ipath_i_bitsextant;
+ ipath_err_t ipath_e_bitsextant;
+ ipath_err_t ipath_hwe_bitsextant;
+
+ /*
+ * Below should be computable from number of ports,
+ * since they are never modified.
+ */
+ u32 ipath_i_rcvavail_mask;
+ u32 ipath_i_rcvurg_mask;
+
+ /*
+ * Register bits for selecting i2c direction and values, used for
+ * I2C serial flash.
+ */
+ u16 ipath_gpio_sda_num;
+ u16 ipath_gpio_scl_num;
+ u64 ipath_gpio_sda;
+ u64 ipath_gpio_scl;
};
/* Private data for file operations */
/* can miss port0 rx interrupts */
#define IPATH_POLL_RX_INTR 0x40000
#define IPATH_DISABLED 0x80000 /* administratively disabled */
+ /* Use GPIO interrupts for new counters */
+#define IPATH_GPIO_ERRINTRS 0x100000
+
+/* Bits in GPIO for the added interrupts */
+#define IPATH_GPIO_PORT0_BIT 2
+#define IPATH_GPIO_RXUVL_BIT 3
+#define IPATH_GPIO_OVRUN_BIT 4
+#define IPATH_GPIO_LLI_BIT 5
+#define IPATH_GPIO_ERRINTR_MASK 0x38
/* portdata flag bit offsets */
/* waiting for a packet to arrive */
int ipathfs_add_device(struct ipath_devdata *);
int ipathfs_remove_device(struct ipath_devdata *);
+/*
+ * dma_addr wrappers - all 0's invalid for hw
+ */
+dma_addr_t ipath_map_page(struct pci_dev *, struct page *, unsigned long,
+ size_t, int);
+dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int);
+
/*
* Flush write combining store buffers (if present) and perform a write
* barrier.
#endif /* _IPATH_DEBUGGING */
+/*
+ * this is used for formatting hw error messages...
+ */
+struct ipath_hwerror_msgs {
+ u64 mask;
+ const char *msg;
+};
+
+#define INFINIPATH_HWE_MSG(a, b) { .mask = INFINIPATH_HWE_##a, .msg = b }
+
+/* in ipath_intr.c... */
+void ipath_format_hwerrors(u64 hwerrs,
+ const struct ipath_hwerror_msgs *hwerrmsgs,
+ size_t nhwerrmsgs,
+ char *msg, size_t lmsg);
+
#endif /* _IPATH_KERNEL_H */