dd->ipath_control);
/*
- * Note that prior to try 14 or 15 of IB, the credit scaling
- * wasn't working, because it was swapped for writes with the
- * 1 bit default linkstate field
+ * set initial max size pkt IBC will send, including ICRC; it's the
+ * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
*/
+ val = (dd->ipath_ibmaxlen >> 2) + 1;
+ ibc = val << dd->ibcc_mpl_shift;
- /* ignore pbc and align word */
- val = dd->ipath_piosize2k - 2 * sizeof(u32);
- /*
- * for ICRC, which we only send in diag test pkt mode, and we
- * don't need to worry about that for mtu
- */
- val += 1;
- /*
- * Set the IBC maxpktlength to the size of our pio buffers the
- * maxpktlength is in words. This is *not* the IB data MTU.
- */
- ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
- /* in KB */
+ /* flowcontrolwatermark is in units of KBytes */
ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
/*
* How often flowctrl sent. More or less in usecs; balance against
/*
* Want to start out with both LINKCMD and LINKINITCMD in NOP
* (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
- * to stay a NOP
+ * to stay a NOP. Flag that we are disabled, for the (unlikely)
+ * case that some recovery path is trying to bring the link up
+ * before we are ready.
*/
ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
INFINIPATH_IBCC_LINKINITCMD_SHIFT;
+ dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
(unsigned long long) ibc);
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
dd->ipath_piosize2k = val & ~0U;
dd->ipath_piosize4k = val >> 32;
- /*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the initial value
- * to 2048.
- */
- dd->ipath_ibmtu = 2048;
+ if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
+ ipath_mtu4096 = 0; /* 4KB not supported by this chip */
+ dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
dd->ipath_piobcnt2k = val & ~0U;
dd->ipath_piobcnt4k = val >> 32;
* head values to match.
*/
val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
- (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
+ ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
/* Initialize so we interrupt on next packet received */
- (void)ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off |
- dd->ipath_pd[0]->port_head, 0);
+ ipath_write_ureg(dd, ur_rcvhdrhead,
+ dd->ipath_rhdrhead_intr_off |
+ dd->ipath_pd[0]->port_head, 0);
/*
* by now pioavail updates to memory should have occurred, so
* initial values of the generation bit correct.
*/
for (i = 0; i < dd->ipath_pioavregs; i++) {
- __le64 val;
+ __le64 pioavail;
/*
* Chip Errata bug 6641; even and odd qwords>3 are swapped.
*/
if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- val = dd->ipath_pioavailregs_dma[i ^ 1];
+ pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
else
- val = dd->ipath_pioavailregs_dma[i];
- dd->ipath_pioavailshadow[i] = le64_to_cpu(val);
+ pioavail = dd->ipath_pioavailregs_dma[i];
+ dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
}
/* can get counters, stats, etc. */
dd->ipath_flags |= IPATH_PRESENT;
goto done;
}
- (void)ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
- dd->ipath_pioavailregs_phys);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
+ dd->ipath_pioavailregs_phys);
/*
* this is to detect s/w errors, which the h/w works around by
* ignoring the low 6 bits of address, if it wasn't aligned.
dd->ipath_stats_timer_active = 1;
}
+ /* Set up HoL state */
+ init_timer(&dd->ipath_hol_timer);
+ dd->ipath_hol_timer.function = ipath_hol_event;
+ dd->ipath_hol_timer.data = (unsigned long)dd;
+ dd->ipath_hol_state = IPATH_HOL_UP;
+
done:
if (!ret) {
*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;