/*
- * linux/drivers/ide/pci/sis5513.c Version 0.25 Jun 10, 2007
+ * linux/drivers/ide/pci/sis5513.c Version 0.30 Aug 9, 2007
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
/*
* Configuration functions
*/
-/* Enables per-drive prefetch and postwrite */
-static void config_drive_art_rwp (ide_drive_t *drive)
+
+static u8 sis_ata133_get_base(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ u32 reg54 = 0;
- u8 reg4bh = 0;
- u8 rw_prefetch = (0x11 << drive->dn);
+ pci_read_config_dword(dev, 0x54, ®54);
- if (drive->media != ide_disk)
- return;
- pci_read_config_byte(dev, 0x4b, ®4bh);
+ return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
+}
- if ((reg4bh & rw_prefetch) != rw_prefetch)
- pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
+static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
+{
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ u16 t1 = 0;
+ u8 drive_pci = 0x40 + drive->dn * 2;
+
+ const u16 pio_timings[] = { 0x000, 0x607, 0x404, 0x303, 0x301 };
+ const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 };
+
+ pci_read_config_word(dev, drive_pci, &t1);
+
+ /* clear active/recovery timings */
+ t1 &= ~0x070f;
+ if (mode >= XFER_MW_DMA_0) {
+ if (chipset_family > ATA_16)
+ t1 &= ~0x8000; /* disable UDMA */
+ t1 |= mwdma_timings[mode - XFER_MW_DMA_0];
+ } else
+ t1 |= pio_timings[mode - XFER_PIO_0];
+
+ pci_write_config_word(dev, drive_pci, t1);
}
-/* Set per-drive active and recovery time */
-static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
+static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ u8 t1, drive_pci = 0x40 + drive->dn * 2;
- u8 drive_pci, test1, test2;
+ /* timing bits: 7:4 active 3:0 recovery */
+ const u8 pio_timings[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+ const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 };
- config_drive_art_rwp(drive);
+ if (mode >= XFER_MW_DMA_0) {
+ u8 t2 = 0;
- /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
- drive_pci = 0x40;
- /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */
- if (chipset_family >= ATA_133) {
- u32 reg54h;
- pci_read_config_dword(dev, 0x54, ®54h);
- if (reg54h & 0x40000000) drive_pci = 0x70;
- drive_pci += ((drive->dn)*0x4);
- } else {
- drive_pci += ((drive->dn)*0x2);
- }
+ pci_read_config_byte(dev, drive_pci, &t2);
+ t2 &= ~0x80; /* disable UDMA */
+ pci_write_config_byte(dev, drive_pci, t2);
- /* register layout changed with newer ATA100 chips */
- if (chipset_family < ATA_100) {
- pci_read_config_byte(dev, drive_pci, &test1);
- pci_read_config_byte(dev, drive_pci+1, &test2);
-
- /* Clear active and recovery timings */
- test1 &= ~0x0F;
- test2 &= ~0x07;
-
- switch(pio) {
- case 4: test1 |= 0x01; test2 |= 0x03; break;
- case 3: test1 |= 0x03; test2 |= 0x03; break;
- case 2: test1 |= 0x04; test2 |= 0x04; break;
- case 1: test1 |= 0x07; test2 |= 0x06; break;
- case 0: /* PIO0: register setting == X000 */
- default: break;
- }
- pci_write_config_byte(dev, drive_pci, test1);
- pci_write_config_byte(dev, drive_pci+1, test2);
- } else if (chipset_family < ATA_133) {
- switch(pio) { /* active recovery
- v v */
- case 4: test1 = 0x30|0x01; break;
- case 3: test1 = 0x30|0x03; break;
- case 2: test1 = 0x40|0x04; break;
- case 1: test1 = 0x60|0x07; break;
- case 0: test1 = 0x00; break;
- default: break;
- }
- pci_write_config_byte(dev, drive_pci, test1);
- } else { /* ATA_133 */
- u32 test3;
- pci_read_config_dword(dev, drive_pci, &test3);
- test3 &= 0xc0c00fff;
- if (test3 & 0x08) {
- test3 |= ini_time_value[ATA_133][pio] << 12;
- test3 |= act_time_value[ATA_133][pio] << 16;
- test3 |= rco_time_value[ATA_133][pio] << 24;
- } else {
- test3 |= ini_time_value[ATA_100][pio] << 12;
- test3 |= act_time_value[ATA_100][pio] << 16;
- test3 |= rco_time_value[ATA_100][pio] << 24;
- }
- pci_write_config_dword(dev, drive_pci, test3);
- }
+ t1 = mwdma_timings[mode - XFER_MW_DMA_0];
+ } else
+ t1 = pio_timings[mode - XFER_PIO_0];
+
+ pci_write_config_byte(dev, drive_pci + 1, t1);
}
-static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
+static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
- config_art_rwp_pio(drive, pio);
- return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ u32 t1 = 0;
+ u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
+
+ pci_read_config_dword(dev, drive_pci, &t1);
+
+ t1 &= 0xc0c00fff;
+ clk = (t1 & 0x08) ? ATA_133 : ATA_100;
+ if (mode >= XFER_MW_DMA_0) {
+ t1 &= ~0x04; /* disable UDMA */
+ idx = mode - XFER_MW_DMA_0 + 5;
+ }
+ idx = mode - XFER_PIO_0;
+ t1 |= ini_time_value[clk][idx] << 12;
+ t1 |= act_time_value[clk][idx] << 16;
+ t1 |= rco_time_value[clk][idx] << 24;
+
+ pci_write_config_dword(dev, drive_pci, t1);
}
-static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
+static void sis_program_timings(ide_drive_t *drive, const u8 mode)
{
- (void)sis5513_tune_drive(drive, pio);
+ if (chipset_family < ATA_100) /* ATA_16/33/66/100a */
+ sis_ata16_program_timings(drive, mode);
+ else if (chipset_family < ATA_133) /* ATA_100/133a */
+ sis_ata100_program_timings(drive, mode);
+ else /* ATA_133 */
+ sis_ata133_program_timings(drive, mode);
}
-static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
+ u8 reg4bh = 0;
+ u8 rw_prefetch = 0;
- u8 drive_pci, reg, speed;
- u32 regdw;
+ pci_read_config_byte(dev, 0x4b, ®4bh);
- speed = ide_rate_filter(drive, xferspeed);
+ if (drive->media == ide_disk)
+ rw_prefetch = 0x11 << drive->dn;
- /* See config_art_rwp_pio for drive pci config registers */
- drive_pci = 0x40;
- if (chipset_family >= ATA_133) {
- u32 reg54h;
- pci_read_config_dword(dev, 0x54, ®54h);
- if (reg54h & 0x40000000) drive_pci = 0x70;
- drive_pci += ((drive->dn)*0x4);
- pci_read_config_dword(dev, (unsigned long)drive_pci, ®dw);
- /* Disable UDMA bit for non UDMA modes on UDMA chips */
- if (speed < XFER_UDMA_0) {
- regdw &= 0xfffffffb;
- pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
- }
-
- } else {
- drive_pci += ((drive->dn)*0x2);
- pci_read_config_byte(dev, drive_pci+1, ®);
- /* Disable UDMA bit for non UDMA modes on UDMA chips */
- if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) {
- reg &= 0x7F;
- pci_write_config_byte(dev, drive_pci+1, reg);
- }
- }
+ if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch)
+ pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
+}
+
+static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ config_drive_art_rwp(drive);
+ sis_program_timings(drive, XFER_PIO_0 + pio);
+}
+
+static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
/* Config chip for mode */
switch(speed) {
case XFER_UDMA_1:
case XFER_UDMA_0:
if (chipset_family >= ATA_133) {
+ u32 regdw = 0;
+ u8 drive_pci = sis_ata133_get_base(drive);
+
+ pci_read_config_dword(dev, drive_pci, ®dw);
regdw |= 0x04;
regdw &= 0xfffff00f;
/* check if ATA133 enable */
regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
} else {
- /* if ATA133 disable, we should not set speed above UDMA5 */
- if (speed > XFER_UDMA_5)
- speed = XFER_UDMA_5;
regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
}
pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
} else {
+ u8 drive_pci = 0x40 + drive->dn * 2, reg = 0;
+
+ pci_read_config_byte(dev, drive_pci+1, ®);
/* Force the UDMA bit on if we want to use UDMA */
reg |= 0x80;
/* clean reg cycle time bits */
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
+ sis_program_timings(drive, speed);
break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- return sis5513_tune_drive(drive, speed - XFER_PIO_0);
default:
BUG();
break;
}
-
- return ide_config_drive_speed(drive, speed);
}
-static int sis5513_config_xfer_rate(ide_drive_t *drive)
+static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
{
- /*
- * TODO: always set PIO mode and remove this
- */
- sis5513_tuneproc(drive, 255);
-
- drive->init_speed = 0;
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ u32 regdw = 0;
+ u8 drive_pci = sis_ata133_get_base(drive);
- if (ide_tune_dma(drive))
- return 0;
+ pci_read_config_dword(dev, drive_pci, ®dw);
- if (ide_use_fast_pio(drive))
- sis5513_tuneproc(drive, 255);
-
- return -1;
+ /* if ATA133 disable, we should not set speed above UDMA5 */
+ return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
}
/* Chip detection and general config */
static const struct sis_laptop sis_laptop[] = {
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
+ { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
/* end marker */
{ 0, }
};
{
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
- hwif->autodma = 0;
-
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &sis5513_tuneproc;
- hwif->speedproc = &sis5513_tune_chipset;
+ hwif->set_pio_mode = &sis_set_pio_mode;
+ hwif->set_dma_mode = &sis_set_dma_mode;
- if (!(hwif->dma_base)) {
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+ if (chipset_family >= ATA_133)
+ hwif->udma_filter = sis5513_ata133_udma_filter;
+
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+
+ if (hwif->dma_base == 0)
return;
- }
hwif->atapi_dma = 1;
hwif->ultra_mask = udma_rates[chipset_family];
hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
-
- if (!chipset_family)
- return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_sis5513(hwif);
-
- if (chipset_family > ATA_16) {
- hwif->ide_dma_check = &sis5513_config_xfer_rate;
- if (!noautodma)
- hwif->autodma = 1;
- }
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
- return;
}
static ide_pci_device_t sis5513_chipset __devinitdata = {
.name = "SIS5513",
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
- .channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
};
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return ide_setup_pci_device(dev, &sis5513_chipset);
}
-static struct pci_device_id sis5513_pci_tbl[] = {
- { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_1180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+static const struct pci_device_id sis5513_pci_tbl[] = {
+ { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 },
+ { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 },
+ { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);