# Hardware monitoring chip drivers configuration
#
-menu "Hardware Monitoring support"
-
-config HWMON
+menuconfig HWMON
tristate "Hardware Monitoring support"
+ depends on HAS_IOMEM
default y
help
Hardware monitoring devices let you monitor the hardware health
This support can also be built as a module. If so, the module
will be called hwmon.
+if HWMON
+
config HWMON_VID
tristate
default n
config SENSORS_ABITUGURU
- tristate "Abit uGuru"
- depends on HWMON && EXPERIMENTAL
+ tristate "Abit uGuru (rev 1 & 2)"
+ depends on EXPERIMENTAL
help
- If you say yes here you get support for the Abit uGuru chips
- sensor part. The voltage and frequency control parts of the Abit
- uGuru are not supported. The Abit uGuru chip can be found on Abit
- uGuru featuring motherboards (most modern Abit motherboards).
+ If you say yes here you get support for the sensor part of the first
+ and second revision of the Abit uGuru chip. The voltage and frequency
+ control parts of the Abit uGuru are not supported. The Abit uGuru
+ chip can be found on Abit uGuru featuring motherboards (most modern
+ Abit motherboards from before end 2005). For more info and a list
+ of which motherboards have which revision see
+ Documentation/hwmon/abituguru
This driver can also be built as a module. If so, the module
will be called abituguru.
+config SENSORS_ABITUGURU3
+ tristate "Abit uGuru (rev 3)"
+ depends on HWMON && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the
+ third revision of the Abit uGuru chip. Only reading the sensors
+ and their settings is supported. The third revision of the Abit
+ uGuru chip can be found on recent Abit motherboards (since end
+ 2005). For more info and a list of which motherboards have which
+ revision see Documentation/hwmon/abituguru3
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru3.
+
+config SENSORS_AD7418
+ tristate "Analog Devices AD7416, AD7417 and AD7418"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7416, AD7417 and AD7418 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7418.
+
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
config SENSORS_ADM1025
tristate "Analog Devices ADM1025 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1025
config SENSORS_ADM1026
tristate "Analog Devices ADM1026 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM1026
config SENSORS_ADM1029
tristate "Analog Devices ADM1029"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for Analog Devices ADM1029
sensor chip.
config SENSORS_ADM1031
tristate "Analog Devices ADM1031 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for Analog Devices ADM9240,
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
- depends on HWMON && X86 && PCI && EXPERIMENTAL
+ depends on X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported is whole AMD K8
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
- depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+ depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
help
Support for the motion sensor included in PowerBooks. Includes
implementations for PMU and I2C.
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the Attansic ATXP1 VID
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for Dallas Semiconductor
DS1621 and DS1625 sensor chips.
config SENSORS_F71805F
tristate "Fintek F71805F/FG and F71872F/FG"
- depends on HWMON && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
features of the Fintek F71805F/FG and F71872F/FG Super-I/O
config SENSORS_FSCHER
tristate "FSC Hermes"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
config SENSORS_FSCPOS
tristate "FSC Poseidon"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for Genesys Logic GL518SM
sensor chips.
config SENSORS_GL520SM
tristate "Genesys Logic GL520SM"
- depends on HWMON && I2C
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for Genesys Logic GL520SM
This driver can also be built as a module. If so, the module
will be called gl520sm.
+config SENSORS_CORETEMP
+ tristate "Intel Core (2) Duo/Solo temperature sensor"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported all are all known variants
+ of Intel Core family.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
- depends on HWMON && I2C
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F and IT8718F sensor chips, and the SiS960 clone.
+ IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
config SENSORS_LM63
tristate "National Semiconductor LM63"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for the National Semiconductor
LM63 remote diode digital temperature sensor with integrated fan
config SENSORS_LM70
tristate "National Semiconductor LM70"
- depends on HWMON && SPI_MASTER && EXPERIMENTAL
+ depends on SPI_MASTER && EXPERIMENTAL
help
If you say yes here you get support for the National Semiconductor
LM70 digital temperature sensor chip.
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM75
sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
config SENSORS_LM77
tristate "National Semiconductor LM77"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM77
sensor chips.
config SENSORS_LM78
tristate "National Semiconductor LM78 and compatibles"
- depends on HWMON && I2C
- select I2C_ISA
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM78,
config SENSORS_LM80
tristate "National Semiconductor LM80"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for National Semiconductor
LM80 sensor chips.
config SENSORS_LM83
tristate "National Semiconductor LM83 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for National Semiconductor
LM82 and LM83 sensor chips.
config SENSORS_LM85
tristate "National Semiconductor LM85 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM85
config SENSORS_LM87
tristate "National Semiconductor LM87"
- depends on HWMON && I2C
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM87
config SENSORS_LM90
tristate "National Semiconductor LM90 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
+ MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
The Analog Devices ADT7461 sensor chip is also supported, but only
if found in ADM1032 compatibility mode.
config SENSORS_LM92
tristate "National Semiconductor LM92 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm92.
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
+ depends on HWMON && I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM93
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm93.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for MAX1619 sensor chip.
This driver can also be built as a module. If so, the module
will be called max1619.
+config SENSORS_MAX6650
+ tristate "Maxim MAX6650 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the MAX6650 / MAX6651
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6650.
+
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
config SENSORS_PC87427
tristate "National Semiconductor PC87427"
- depends on HWMON && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC87427 Super-I/O chip.
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on HWMON && I2C && PCI && EXPERIMENTAL
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_DME1737
+ tristate "SMSC DME1737 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ and fan control features of the SMSC DME1737 (and compatibles
+ like the Asus A8000) Super-I/O chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called dme1737.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
- depends on HWMON && I2C
- select I2C_ISA
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
- LPC47M192 and LPC47M997 chips.
+ LPC47M192, LPC47M292 and LPC47M997 chips.
- The temperature and voltage sensor features of the LPC47M192
- and LPC47M997 are supported by another driver, select also
- "SMSC LPC47M192 and compatibles" below for those.
+ The temperature and voltage sensor features of the LPC47M15x,
+ LPC47M192, LPC47M292 and LPC47M997 are supported by another
+ driver, select also "SMSC LPC47M192 and compatibles" below for
+ those.
This driver can also be built as a module. If so, the module
will be called smsc47m1.
config SENSORS_SMSC47M192
tristate "SMSC LPC47M192 and compatibles"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the temperature and
- voltage sensors of the SMSC LPC47M192 and LPC47M997 chips.
+ voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
+ and LPC47M997 chips.
The fan monitoring and control capabilities of these chips
are supported by another driver, select
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_ISA
+ depends on EXPERIMENTAL
help
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
config SENSORS_VIA686A
tristate "VIA686A"
- depends on HWMON && I2C && PCI
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
config SENSORS_VT1211
tristate "VIA VT1211"
- depends on HWMON && EXPERIMENTAL
+ depends on EXPERIMENTAL
select HWMON_VID
help
If you say yes here then you get support for hardware monitoring
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on HWMON && I2C && PCI && EXPERIMENTAL
+ depends on PCI
select HWMON_VID
- select I2C_ISA
help
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
- depends on HWMON && I2C
- select I2C_ISA
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W8378x series
config SENSORS_W83791D
tristate "Winbond W83791D"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the Winbond W83791D chip.
config SENSORS_W83792D
tristate "Winbond W83792D"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Winbond W83792D chip.
config SENSORS_W83793
tristate "Winbond W83793"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the Winbond W83793
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
- depends on HWMON && I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Winbond W83L785TS-S
sensor chip, which is used on the Asus A7N8X, among other
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
- depends on HWMON && I2C
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for the Winbond W836X7 series
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on HWMON && I2C && EXPERIMENTAL
- select I2C_ISA
+ tristate "Winbond W83627EHF/DHG"
+ select HWMON_VID
help
- If you say yes here you get preliminary support for the hardware
+ If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
This driver also supports the W83627EHG, which is the lead-free
- version of the W83627EHF.
+ version of the W83627EHF, and the W83627DHG, which is a similar
+ chip suited for specific Intel processors that use PECI such as
+ the Core 2 Duo.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
config SENSORS_HDAPS
tristate "IBM Hard Drive Active Protection System (hdaps)"
- depends on HWMON && INPUT && X86
+ depends on INPUT && X86
default n
help
This driver provides support for the IBM Hard Drive Active Protection
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
+config SENSORS_APPLESMC
+ tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
+ depends on INPUT && X86
+ select NEW_LEDS
+ select LEDS_CLASS
+ default n
+ help
+ This driver provides support for the Apple System Management
+ Controller, which provides an accelerometer (Apple Sudden Motion
+ Sensor), light sensors, temperature sensors, keyboard backlight
+ control and fan control.
+
+ Only Intel-based Apple's computers are supported (MacBook Pro,
+ MacBook, MacMini).
+
+ Data from the different sensors, keyboard backlight control and fan
+ control are accessible via sysfs.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of applesmc.
+
config HWMON_DEBUG_CHIP
bool "Hardware Monitoring Chip debugging messages"
- depends on HWMON
default n
help
Say Y here if you want the I2C chip drivers to produce a bunch of
a problem with I2C support and want to see more of what is going
on.
-endmenu
+endif # HWMON