default n
config SENSORS_ABITUGURU
- tristate "Abit uGuru"
- depends on EXPERIMENTAL
+ tristate "Abit uGuru (rev 1 & 2)"
+ depends on X86 && EXPERIMENTAL
help
- If you say yes here you get support for the Abit uGuru chips
- sensor part. The voltage and frequency control parts of the Abit
- uGuru are not supported. The Abit uGuru chip can be found on Abit
- uGuru featuring motherboards (most modern Abit motherboards).
+ If you say yes here you get support for the sensor part of the first
+ and second revision of the Abit uGuru chip. The voltage and frequency
+ control parts of the Abit uGuru are not supported. The Abit uGuru
+ chip can be found on Abit uGuru featuring motherboards (most modern
+ Abit motherboards from before end 2005). For more info and a list
+ of which motherboards have which revision see
+ Documentation/hwmon/abituguru
This driver can also be built as a module. If so, the module
will be called abituguru.
+config SENSORS_ABITUGURU3
+ tristate "Abit uGuru (rev 3)"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the
+ third revision of the Abit uGuru chip. Only reading the sensors
+ and their settings is supported. The third revision of the Abit
+ uGuru chip can be found on recent Abit motherboards (since end
+ 2005). For more info and a list of which motherboards have which
+ revision see Documentation/hwmon/abituguru3
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru3.
+
config SENSORS_AD7418
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7470
+ tristate "Analog Devices ADT7470"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7470 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7470.
+
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on I2C && EXPERIMENTAL
+ depends on X86 && I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
will be called ds1621.
config SENSORS_F71805F
- tristate "Fintek F71805F/FG and F71872F/FG"
+ tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71805F/FG and F71872F/FG Super-I/O
- chips.
+ features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+ Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
+config SENSORS_F71882FG
+ tristate "Fintek F71882FG and F71883FG"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71882FG and F71883FG Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71882fg.
+
+config SENSORS_F75375S
+ tristate "Fintek F75375S/SP and F75373";
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F75375S/SP and F75373
+
+ This driver can also be built as a module. If so, the module
+ will be called f75375s.
+
config SENSORS_FSCHER
tristate "FSC Hermes"
- depends on I2C
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
config SENSORS_FSCPOS
tristate "FSC Poseidon"
- depends on I2C
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
This driver can also be built as a module. If so, the module
will be called fscpos.
+config SENSORS_FSCHMD
+ tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+ depends on X86 && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for various Fujitsu Siemens
+ Computers sensor chips.
+
+ This is a new merged driver for FSC sensor chips which is intended
+ as a replacment for the fscpos, fscscy and fscher drivers and adds
+ support for several other FCS sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fschmd.
+
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
depends on I2C
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMPEX
+ tristate "IBM PowerExecutive temperature/power sensors"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors in various IBM System X servers that support
+ PowerExecutive. So far this includes the x3550, x3650, x3655,
+ x3755, and certain HS20 blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmpex.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
- depends on I2C
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F and IT8718F sensor chips, and the SiS960 clone.
+ IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
+ MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
The Analog Devices ADT7461 sensor chip is also supported, but only
if found in ADM1032 compatibility mode.
This driver can also be built as a module. If so, the module
will be called lm92.
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM93
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm93.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on I2C && PCI && EXPERIMENTAL
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_DME1737
+ tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ and fan control features of the SMSC DME1737 (and compatibles
+ like the Asus A8000) and SCH311x Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called dme1737.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
help
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_THMC50
+ tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments THMC50
+ sensor chips and clones: the Analog Devices ADM1022.
+
+ This driver can also be built as a module. If so, the module
+ will be called thmc50.
+
config SENSORS_VIA686A
tristate "VIA686A"
- depends on I2C && PCI
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI
select HWMON_VID
- select I2C_ISA
help
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on I2C && EXPERIMENTAL
- select I2C_ISA
+ tristate "Winbond W83627EHF/DHG"
+ select HWMON_VID
help
- If you say yes here you get preliminary support for the hardware
+ If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
This driver also supports the W83627EHG, which is the lead-free
- version of the W83627EHF.
+ version of the W83627EHF, and the W83627DHG, which is a similar
+ chip suited for specific Intel processors that use PECI such as
+ the Core 2 Duo.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
config SENSORS_HDAPS
tristate "IBM Hard Drive Active Protection System (hdaps)"
depends on INPUT && X86
+ select INPUT_POLLDEV
default n
help
This driver provides support for the IBM Hard Drive Active Protection
git.openpandora.org / pandora-kernel.git / blobdiff