config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
- depends on X86 && EXPERIMENTAL
+ depends on X86 && DMI && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
config SENSORS_ABITUGURU3
tristate "Abit uGuru (rev 3)"
- depends on X86 && EXPERIMENTAL
+ depends on X86 && DMI && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
config SENSORS_ASC7621
tristate "Andigilog aSC7621"
- depends on HWMON && I2C
+ depends on I2C
help
If you say yes here you get support for the aSC7621
family of SMBus sensors chip found on most Intel X38, X48, X58,
will be called k8temp.
config SENSORS_K10TEMP
- tristate "AMD Family 10h/11h/12h/14h temperature sensor"
+ tristate "AMD Family 10h+ temperature sensor"
depends on X86 && PCI
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
the AMD Family 10h and all revisions of the AMD Family 11h,
- 12h (Llano), and 14h (Brazos) microarchitectures.
+ 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
+config SENSORS_FAM15H_POWER
+ tristate "AMD Family 15h processor power"
+ depends on X86 && PCI
+ help
+ If you say yes here you get support for processor power
+ information of your AMD family 15h CPU.
+
+ This driver can also be built as a module. If so, the module
+ will be called fam15h_power.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C && EXPERIMENTAL
If you say yes here you get support for hardware monitoring
features of many Fintek Super-I/O (LPC) chips. The currently
supported chips are:
- F71808E
+ F71808E/A
F71858FG
F71862FG
F71863FG
sensor inside your CPU. Most of the family 6 CPUs
are supported. Check Documentation/hwmon/coretemp for details.
-config SENSORS_PKGTEMP
- tristate "Intel processor package temperature sensor"
- depends on X86 && EXPERIMENTAL
- help
- If you say yes here you get support for the package level temperature
- sensor inside your CPU. Check documentation/driver for details.
-
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
select IPMI_SI
This driver can also be built as a module. If so, the module
will be called max1111.
+config SENSORS_MAX16065
+ tristate "Maxim MAX16065 System Manager and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for hardware monitoring
+ capabilities of the following Maxim System Manager chips.
+ MAX16065
+ MAX16066
+ MAX16067
+ MAX16068
+ MAX16070
+ MAX16071
+
+ This driver can also be built as a module. If so, the module
+ will be called max16065.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
This driver can also be built as a module. If so, the module
will be called max6639.
+config SENSORS_MAX6642
+ tristate "Maxim MAX6642 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for MAX6642 sensor chip.
+ MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
+ with Overtemperature Alarm from Maxim.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6642.
+
config SENSORS_MAX6650
tristate "Maxim MAX6650 sensor chip"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module will
be called pmbus.
+config SENSORS_ADM1275
+ tristate "Analog Devices ADM1275"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1275.
+
config SENSORS_MAX16064
tristate "Maxim MAX16064"
default n
This driver can also be built as a module. If so, the module will
be called max8688.
+config SENSORS_UCD9000
+ tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
+ Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9000.
+
+config SENSORS_UCD9200
+ tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+ Digital PWM System Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9200.
+
endif # PMBUS
config SENSORS_SHT15
This driver can also be built as a module. If so, the module
will be called emc2103.
+config SENSORS_EMC6W201
+ tristate "SMSC EMC6W201"
+ depends on I2C
+ help
+ If you say yes here you get support for the SMSC EMC6W201
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called emc6w201.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
help
comment "ACPI drivers"
+config SENSORS_ACPI_POWER
+ tristate "ACPI 4.0 power meter"
+ help
+ This driver exposes ACPI 4.0 power meters as hardware monitoring
+ devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
+ and a power meter.
+
+ To compile this driver as a module, choose M here:
+ the module will be called acpi_power_meter.
+
config SENSORS_ATK0110
tristate "ASUS ATK0110"
depends on X86 && EXPERIMENTAL
git.openpandora.org / pandora-kernel.git / blobdiff