/* IIR "flip pending" means done if this bit is set */
I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
+
+ /* interrupts should cause a wake up from C3 */
+ I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS));
}
static void i85x_init_clock_gating(struct drm_device *dev)
void __vlv_set_power_well(struct drm_i915_private *dev_priv,
enum punit_power_well power_well_id, bool enable)
{
+ struct drm_device *dev = dev_priv->dev;
u32 mask;
u32 state;
u32 ctrl;
+ enum pipe pipe;
+
+ if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ if (enable) {
+ /*
+ * Enable the CRI clock source so we can get at the
+ * display and the reference clock for VGA
+ * hotplug / manual detection.
+ */
+ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+ DPLL_REFA_CLK_ENABLE_VLV |
+ DPLL_INTEGRATED_CRI_CLK_VLV);
+ udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+ } else {
+ for_each_pipe(pipe)
+ assert_pll_disabled(dev_priv, pipe);
+ /* Assert common reset */
+ I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) &
+ ~DPIO_CMNRST);
+ }
+ }
mask = PUNIT_PWRGT_MASK(power_well_id);
state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
out:
mutex_unlock(&dev_priv->rps.hw_lock);
+
+ /*
+ * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+ * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
+ * a. GUnit 0x2110 bit[0] set to 1 (def 0)
+ * b. The other bits such as sfr settings / modesel may all
+ * be set to 0.
+ *
+ * This should only be done on init and resume from S3 with
+ * both PLLs disabled, or we risk losing DPIO and PLL
+ * synchronization.
+ */
+ if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable)
+ I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
}
static void vlv_set_power_well(struct drm_i915_private *dev_priv,
.data = PUNIT_POWER_WELL_DISP2D,
.ops = &vlv_display_power_well_ops,
},
- {
- .name = "dpio-common",
- .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
- .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
- .ops = &vlv_dpio_power_well_ops,
- },
{
.name = "dpio-tx-b-01",
.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
.ops = &vlv_dpio_power_well_ops,
.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
},
+ {
+ .name = "dpio-common",
+ .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+ .ops = &vlv_dpio_power_well_ops,
+ },
};
#define set_power_wells(power_domains, __power_wells) ({ \