#include <drm/drm_fb_helper.h>
#include <drm/drm_edid.h>
+/**
+ * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
+ * connector list
+ * @dev: drm device to operate on
+ *
+ * Some userspace presumes that the first connected connector is the main
+ * display, where it's supposed to display e.g. the login screen. For
+ * laptops, this should be the main panel. Use this function to sort all
+ * (eDP/LVDS) panels to the front of the connector list, instead of
+ * painstakingly trying to initialize them in the right order.
+ */
+void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
+{
+ struct drm_connector *connector, *tmp;
+ struct list_head panel_list;
+
+ INIT_LIST_HEAD(&panel_list);
+
+ list_for_each_entry_safe(connector, tmp,
+ &dev->mode_config.connector_list, head) {
+ if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ list_move_tail(&connector->head, &panel_list);
+ }
+
+ list_splice(&panel_list, &dev->mode_config.connector_list);
+}
+EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
+
static bool drm_kms_helper_poll = true;
module_param_named(poll, drm_kms_helper_poll, bool, 0600);
/**
* drm_helper_probe_single_connector_modes - get complete set of display modes
- * @dev: DRM device
+ * @connector: connector to probe
* @maxX: max width for modes
* @maxY: max height for modes
*
* LOCKING:
* Caller must hold mode config lock.
*
- * Based on @dev's mode_config layout, scan all the connectors and try to detect
- * modes on them. Modes will first be added to the connector's probed_modes
- * list, then culled (based on validity and the @maxX, @maxY parameters) and
- * put into the normal modes list.
+ * Based on the helper callbacks implemented by @connector try to detect all
+ * valid modes. Modes will first be added to the connector's probed_modes list,
+ * then culled (based on validity and the @maxX, @maxY parameters) and put into
+ * the normal modes list.
*
- * Intended to be used either at bootup time or when major configuration
- * changes have occurred.
- *
- * FIXME: take into account monitor limits
+ * Intended to be use as a generic implementation of the ->probe() @connector
+ * callback for drivers that use the crtc helpers for output mode filtering and
+ * detection.
*
* RETURNS:
* Number of modes found on @connector.
connector->funcs->force(connector);
} else {
connector->status = connector->funcs->detect(connector, true);
- drm_kms_helper_poll_enable(dev);
}
+ /* Re-enable polling in case the global poll config changed. */
+ if (drm_kms_helper_poll != dev->mode_config.poll_running)
+ drm_kms_helper_poll_enable(dev);
+
+ dev->mode_config.poll_running = drm_kms_helper_poll;
+
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
connector->base.id, drm_get_connector_name(connector));
}
/**
- * drm_crtc_set_mode - set a mode
+ * drm_crtc_helper_set_mode - internal helper to set a mode
* @crtc: CRTC to program
* @mode: mode to use
- * @x: width of mode
- * @y: height of mode
+ * @x: horizontal offset into the surface
+ * @y: vertical offset into the surface
+ * @old_fb: old framebuffer, for cleanup
*
* LOCKING:
* Caller must hold mode config lock.
*
* Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
- * to fixup or reject the mode prior to trying to set it.
+ * to fixup or reject the mode prior to trying to set it. This is an internal
+ * helper that drivers could e.g. use to update properties that require the
+ * entire output pipe to be disabled and re-enabled in a new configuration. For
+ * example for changing whether audio is enabled on a hdmi link or for changing
+ * panel fitter or dither attributes. It is also called by the
+ * drm_crtc_helper_set_config() helper function to drive the mode setting
+ * sequence.
*
* RETURNS:
* True if the mode was set successfully, or false otherwise.
/**
* drm_crtc_helper_set_config - set a new config from userspace
- * @crtc: CRTC to setup
- * @crtc_info: user provided configuration
- * @new_mode: new mode to set
- * @connector_set: set of connectors for the new config
- * @fb: new framebuffer
+ * @set: mode set configuration
*
* LOCKING:
* Caller must hold mode config lock.
*
- * Setup a new configuration, provided by the user in @crtc_info, and enable
- * it.
+ * Setup a new configuration, provided by the upper layers (either an ioctl call
+ * from userspace or internally e.g. from the fbdev suppport code) in @set, and
+ * enable it. This is the main helper functions for drivers that implement
+ * kernel mode setting with the crtc helper functions and the assorted
+ * ->prepare(), ->modeset() and ->commit() helper callbacks.
*
* RETURNS:
- * Zero. (FIXME)
+ * Returns 0 on success, -ERRNO on failure.
*/
int drm_crtc_helper_set_config(struct drm_mode_set *set)
{
}
/**
- * drm_helper_connector_dpms
- * @connector affected connector
- * @mode DPMS mode
+ * drm_helper_connector_dpms() - connector dpms helper implementation
+ * @connector: affected connector
+ * @mode: DPMS mode
*
- * Calls the low-level connector DPMS function, then
- * calls appropriate encoder and crtc DPMS functions as well
+ * This is the main helper function provided by the crtc helper framework for
+ * implementing the DPMS connector attribute. It computes the new desired DPMS
+ * state for all encoders and crtcs in the output mesh and calls the ->dpms()
+ * callback provided by the driver appropriately.
*/
void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
{
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
+void drm_kms_helper_hotplug_event(struct drm_device *dev)
+{
+ /* send a uevent + call fbdev */
+ drm_sysfs_hotplug_event(dev);
+ if (dev->mode_config.funcs->output_poll_changed)
+ dev->mode_config.funcs->output_poll_changed(dev);
+}
+EXPORT_SYMBOL(drm_kms_helper_hotplug_event);
+
#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
static void output_poll_execute(struct work_struct *work)
{
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- /* if this is HPD or polled don't check it -
- TV out for instance */
- if (!connector->polled)
+ /* Ignore forced connectors. */
+ if (connector->force)
continue;
- else if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT))
- repoll = true;
+ /* Ignore HPD capable connectors and connectors where we don't
+ * want any hotplug detection at all for polling. */
+ if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
+ continue;
+
+ repoll = true;
old_status = connector->status;
/* if we are connected and don't want to poll for disconnect
skip it */
if (old_status == connector_status_connected &&
- !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT) &&
- !(connector->polled & DRM_CONNECTOR_POLL_HPD))
+ !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
continue;
connector->status = connector->funcs->detect(connector, false);
mutex_unlock(&dev->mode_config.mutex);
- if (changed) {
- /* send a uevent + call fbdev */
- drm_sysfs_hotplug_event(dev);
- if (dev->mode_config.funcs->output_poll_changed)
- dev->mode_config.funcs->output_poll_changed(dev);
- }
+ if (changed)
+ drm_kms_helper_hotplug_event(dev);
if (repoll)
schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD);
return;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector->polled)
+ if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT))
poll = true;
}
void drm_helper_hpd_irq_event(struct drm_device *dev)
{
+ struct drm_connector *connector;
+ enum drm_connector_status old_status;
+ bool changed = false;
+
if (!dev->mode_config.poll_enabled)
return;
- /* kill timer and schedule immediate execution, this doesn't block */
- cancel_delayed_work(&dev->mode_config.output_poll_work);
- if (drm_kms_helper_poll)
- schedule_delayed_work(&dev->mode_config.output_poll_work, 0);
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+
+ /* Only handle HPD capable connectors. */
+ if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
+ continue;
+
+ old_status = connector->status;
+
+ connector->status = connector->funcs->detect(connector, false);
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
+ connector->base.id,
+ drm_get_connector_name(connector),
+ old_status, connector->status);
+ if (old_status != connector->status)
+ changed = true;
+ }
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ if (changed)
+ drm_kms_helper_hotplug_event(dev);
}
EXPORT_SYMBOL(drm_helper_hpd_irq_event);
git.openpandora.org / pandora-kernel.git / blobdiff