drm_file_t * filp_priv,
u32 *offset)
{
- u32 off = *offset;
+ u64 off = *offset;
+ u32 fb_end = dev_priv->fb_location + dev_priv->fb_size - 1;
struct drm_radeon_driver_file_fields *radeon_priv;
/* Hrm ... the story of the offset ... So this function converts
/* First, the best case, the offset already lands in either the
* framebuffer or the GART mapped space
*/
- if ((off >= dev_priv->fb_location &&
- off < (dev_priv->fb_location + dev_priv->fb_size)) ||
- (off >= dev_priv->gart_vm_start &&
- off < (dev_priv->gart_vm_start + dev_priv->gart_size)))
+ if (radeon_check_offset(dev_priv, off))
return 0;
/* Ok, that didn't happen... now check if we have a zero based
}
/* Finally, assume we aimed at a GART offset if beyond the fb */
- if (off > (dev_priv->fb_location + dev_priv->fb_size))
- off = off - (dev_priv->fb_location + dev_priv->fb_size) +
- dev_priv->gart_vm_start;
+ if (off > fb_end)
+ off = off - fb_end - 1 + dev_priv->gart_vm_start;
/* Now recheck and fail if out of bounds */
- if ((off >= dev_priv->fb_location &&
- off < (dev_priv->fb_location + dev_priv->fb_size)) ||
- (off >= dev_priv->gart_vm_start &&
- off < (dev_priv->gart_vm_start + dev_priv->gart_size))) {
- DRM_DEBUG("offset fixed up to 0x%x\n", off);
+ if (radeon_check_offset(dev_priv, off)) {
+ DRM_DEBUG("offset fixed up to 0x%x\n", (unsigned int)off);
*offset = off;
return 0;
}
}
break;
+ case R200_EMIT_VAP_CTL:{
+ RING_LOCALS;
+ BEGIN_RING(2);
+ OUT_RING_REG(RADEON_SE_TCL_STATE_FLUSH, 0);
+ ADVANCE_RING();
+ }
+ break;
+
case RADEON_EMIT_RB3D_COLORPITCH:
case RADEON_EMIT_RE_LINE_PATTERN:
case RADEON_EMIT_SE_LINE_WIDTH:
case R200_EMIT_TCL_LIGHT_MODEL_CTL_0:
case R200_EMIT_TFACTOR_0:
case R200_EMIT_VTX_FMT_0:
- case R200_EMIT_VAP_CTL:
case R200_EMIT_MATRIX_SELECT_0:
case R200_EMIT_TEX_PROC_CTL_2:
case R200_EMIT_TCL_UCP_VERT_BLEND_CTL:
unsigned int *cmdsz)
{
u32 *cmd = (u32 *) cmdbuf->buf;
+ u32 offset, narrays;
+ int count, i, k;
*cmdsz = 2 + ((cmd[0] & RADEON_CP_PACKET_COUNT_MASK) >> 16);
return DRM_ERR(EINVAL);
}
- /* Check client state and fix it up if necessary */
- if (cmd[0] & 0x8000) { /* MSB of opcode: next DWORD GUI_CNTL */
- u32 offset;
+ switch(cmd[0] & 0xff00) {
+ /* XXX Are there old drivers needing other packets? */
+
+ case RADEON_3D_DRAW_IMMD:
+ case RADEON_3D_DRAW_VBUF:
+ case RADEON_3D_DRAW_INDX:
+ case RADEON_WAIT_FOR_IDLE:
+ case RADEON_CP_NOP:
+ case RADEON_3D_CLEAR_ZMASK:
+/* case RADEON_CP_NEXT_CHAR:
+ case RADEON_CP_PLY_NEXTSCAN:
+ case RADEON_CP_SET_SCISSORS: */ /* probably safe but will never need them? */
+ /* these packets are safe */
+ break;
+
+ case RADEON_CP_3D_DRAW_IMMD_2:
+ case RADEON_CP_3D_DRAW_VBUF_2:
+ case RADEON_CP_3D_DRAW_INDX_2:
+ case RADEON_3D_CLEAR_HIZ:
+ /* safe but r200 only */
+ if (dev_priv->microcode_version != UCODE_R200) {
+ DRM_ERROR("Invalid 3d packet for r100-class chip\n");
+ return DRM_ERR(EINVAL);
+ }
+ break;
+
+ case RADEON_3D_LOAD_VBPNTR:
+ count = (cmd[0] >> 16) & 0x3fff;
+
+ if (count > 18) { /* 12 arrays max */
+ DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n",
+ count);
+ return DRM_ERR(EINVAL);
+ }
+
+ /* carefully check packet contents */
+ narrays = cmd[1] & ~0xc000;
+ k = 0;
+ i = 2;
+ while ((k < narrays) && (i < (count + 2))) {
+ i++; /* skip attribute field */
+ if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[i])) {
+ DRM_ERROR
+ ("Invalid offset (k=%d i=%d) in 3D_LOAD_VBPNTR packet.\n",
+ k, i);
+ return DRM_ERR(EINVAL);
+ }
+ k++;
+ i++;
+ if (k == narrays)
+ break;
+ /* have one more to process, they come in pairs */
+ if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[i])) {
+ DRM_ERROR
+ ("Invalid offset (k=%d i=%d) in 3D_LOAD_VBPNTR packet.\n",
+ k, i);
+ return DRM_ERR(EINVAL);
+ }
+ k++;
+ i++;
+ }
+ /* do the counts match what we expect ? */
+ if ((k != narrays) || (i != (count + 2))) {
+ DRM_ERROR
+ ("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n",
+ k, i, narrays, count + 1);
+ return DRM_ERR(EINVAL);
+ }
+ break;
+
+ case RADEON_3D_RNDR_GEN_INDX_PRIM:
+ if (dev_priv->microcode_version != UCODE_R100) {
+ DRM_ERROR("Invalid 3d packet for r200-class chip\n");
+ return DRM_ERR(EINVAL);
+ }
+ if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[1])) {
+ DRM_ERROR("Invalid rndr_gen_indx offset\n");
+ return DRM_ERR(EINVAL);
+ }
+ break;
+ case RADEON_CP_INDX_BUFFER:
+ if (dev_priv->microcode_version != UCODE_R200) {
+ DRM_ERROR("Invalid 3d packet for r100-class chip\n");
+ return DRM_ERR(EINVAL);
+ }
+ if ((cmd[1] & 0x8000ffff) != 0x80000810) {
+ DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
+ return DRM_ERR(EINVAL);
+ }
+ if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[2])) {
+ DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+ return DRM_ERR(EINVAL);
+ }
+ break;
+
+ case RADEON_CNTL_HOSTDATA_BLT:
+ case RADEON_CNTL_PAINT_MULTI:
+ case RADEON_CNTL_BITBLT_MULTI:
+ /* MSB of opcode: next DWORD GUI_CNTL */
if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
| RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[2] << 10;
}
cmd[3] = (cmd[3] & 0xffc00000) | offset >> 10;
}
+ break;
+
+ default:
+ DRM_ERROR("Invalid packet type %x\n", cmd[0] & 0xff00);
+ return DRM_ERR(EINVAL);
}
return 0;
*/
dev_priv->sarea_priv->ctx_owner = 0;
- if ((dev_priv->flags & CHIP_HAS_HIERZ)
+ if ((dev_priv->flags & RADEON_HAS_HIERZ)
&& (flags & RADEON_USE_HIERZ)) {
/* FIXME : reverse engineer that for Rx00 cards */
/* FIXME : the mask supposedly contains low-res z values. So can't set
for (i = 0; i < nbox; i++) {
int tileoffset, nrtilesx, nrtilesy, j;
/* it looks like r200 needs rv-style clears, at least if hierz is not enabled? */
- if ((dev_priv->flags & CHIP_HAS_HIERZ)
+ if ((dev_priv->flags & RADEON_HAS_HIERZ)
&& !(dev_priv->microcode_version == UCODE_R200)) {
/* FIXME : figure this out for r200 (when hierz is enabled). Or
maybe r200 actually doesn't need to put the low-res z value into
}
/* TODO don't always clear all hi-level z tiles */
- if ((dev_priv->flags & CHIP_HAS_HIERZ)
+ if ((dev_priv->flags & RADEON_HAS_HIERZ)
&& (dev_priv->microcode_version == UCODE_R200)
&& (flags & RADEON_USE_HIERZ))
/* r100 and cards without hierarchical z-buffer have no high-level z-buffer */
DRM_DEBUG("dispatch swap %d,%d-%d,%d\n", x, y, w, h);
- BEGIN_RING(7);
+ BEGIN_RING(9);
- OUT_RING(CP_PACKET3(RADEON_CNTL_BITBLT_MULTI, 5));
+ OUT_RING(CP_PACKET0(RADEON_DP_GUI_MASTER_CNTL, 0));
OUT_RING(RADEON_GMC_SRC_PITCH_OFFSET_CNTL |
RADEON_GMC_DST_PITCH_OFFSET_CNTL |
RADEON_GMC_BRUSH_NONE |
/* Make this work even if front & back are flipped:
*/
+ OUT_RING(CP_PACKET0(RADEON_SRC_PITCH_OFFSET, 1));
if (dev_priv->current_page == 0) {
OUT_RING(dev_priv->back_pitch_offset);
OUT_RING(dev_priv->front_pitch_offset);
OUT_RING(dev_priv->back_pitch_offset);
}
+ OUT_RING(CP_PACKET0(RADEON_SRC_X_Y, 2));
OUT_RING((x << 16) | y);
OUT_RING((x << 16) | y);
OUT_RING((w << 16) | h);
case RADEON_PARAM_GART_TEX_HANDLE:
value = dev_priv->gart_textures_offset;
break;
-
+ case RADEON_PARAM_SCRATCH_OFFSET:
+ if (!dev_priv->writeback_works)
+ return DRM_ERR(EINVAL);
+ value = RADEON_SCRATCH_REG_OFFSET;
+ break;
case RADEON_PARAM_CARD_TYPE:
- if (dev_priv->flags & CHIP_IS_PCIE)
+ if (dev_priv->flags & RADEON_IS_PCIE)
value = RADEON_CARD_PCIE;
- else if (dev_priv->flags & CHIP_IS_AGP)
+ else if (dev_priv->flags & RADEON_IS_AGP)
value = RADEON_CARD_AGP;
else
value = RADEON_CARD_PCI;
break;
default:
+ DRM_DEBUG("Invalid parameter %d\n", param.param);
return DRM_ERR(EINVAL);
}
git.openpandora.org / pandora-kernel.git / blobdiff