memstick: fix MSProHG 8-bit interface mode support

[pandora-kernel.git] / drivers / atm / horizon.c

diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 4dc1010..c0ac728 100644 (file)
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -424,7 +424,7 @@ static inline void FLUSH_RX_CHANNEL (hrz_dev * dev, u16 channel) {
   return;
 }
 
-static inline void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) {
+static void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) {
   while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & FLUSH_CHANNEL)
     ;
   return;
@@ -435,7 +435,7 @@ static inline void SELECT_RX_CHANNEL (hrz_dev * dev, u16 channel) {
   return;
 }
 
-static inline void WAIT_UPDATE_COMPLETE (hrz_dev * dev) {
+static void WAIT_UPDATE_COMPLETE (hrz_dev * dev) {
   while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & RX_CHANNEL_UPDATE_IN_PROGRESS)
     ;
   return;
@@ -796,7 +796,7 @@ static void hrz_change_vc_qos (ATM_RXER * rxer, MAAL_QOS * qos) {
 
 /********** free an skb (as per ATM device driver documentation) **********/
 
-static inline void hrz_kfree_skb (struct sk_buff * skb) {
+static void hrz_kfree_skb (struct sk_buff * skb) {
   if (ATM_SKB(skb)->vcc->pop) {
     ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
   } else {
@@ -1076,7 +1076,7 @@ static void rx_schedule (hrz_dev * dev, int irq) {
 
 /********** handle RX bus master complete events **********/
 
-static inline void rx_bus_master_complete_handler (hrz_dev * dev) {
+static void rx_bus_master_complete_handler (hrz_dev * dev) {
   if (test_bit (rx_busy, &dev->flags)) {
     rx_schedule (dev, 1);
   } else {
@@ -1089,7 +1089,7 @@ static inline void rx_bus_master_complete_handler (hrz_dev * dev) {
 
 /********** (queue to) become the next TX thread **********/
 
-static inline int tx_hold (hrz_dev * dev) {
+static int tx_hold (hrz_dev * dev) {
   PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);
   wait_event_interruptible(dev->tx_queue, (!test_and_set_bit(tx_busy, &dev->flags)));
   PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);
@@ -1232,7 +1232,7 @@ static void tx_schedule (hrz_dev * const dev, int irq) {
 
 /********** handle TX bus master complete events **********/
 
-static inline void tx_bus_master_complete_handler (hrz_dev * dev) {
+static void tx_bus_master_complete_handler (hrz_dev * dev) {
   if (test_bit (tx_busy, &dev->flags)) {
     tx_schedule (dev, 1);
   } else {
@@ -1246,7 +1246,7 @@ static inline void tx_bus_master_complete_handler (hrz_dev * dev) {
 /********** move RX Q pointer to next item in circular buffer **********/
 
 // called only from IRQ sub-handler
-static inline u32 rx_queue_entry_next (hrz_dev * dev) {
+static u32 rx_queue_entry_next (hrz_dev * dev) {
   u32 rx_queue_entry;
   spin_lock (&dev->mem_lock);
   rx_queue_entry = rd_mem (dev, &dev->rx_q_entry->entry);
@@ -1270,7 +1270,7 @@ static inline void rx_disabled_handler (hrz_dev * dev) {
 /********** handle RX data received by device **********/
 
 // called from IRQ handler
-static inline void rx_data_av_handler (hrz_dev * dev) {
+static void rx_data_av_handler (hrz_dev * dev) {
   u32 rx_queue_entry;
   u32 rx_queue_entry_flags;
   u16 rx_len;
@@ -1382,8 +1382,9 @@ static inline void rx_data_av_handler (hrz_dev * dev) {
 
 /********** interrupt handler **********/
 
-static irqreturn_t interrupt_handler(int irq, void *dev_id) {
-  hrz_dev * dev = (hrz_dev *) dev_id;
+static irqreturn_t interrupt_handler(int irq, void *dev_id)
+{
+  hrz_dev *dev = dev_id;
   u32 int_source;
   unsigned int irq_ok;
   
@@ -1393,7 +1394,7 @@ static irqreturn_t interrupt_handler(int irq, void *dev_id) {
   irq_ok = 0;
   while ((int_source = rd_regl (dev, INT_SOURCE_REG_OFF)
          & INTERESTING_INTERRUPTS)) {
-    // In the interests of fairness, the (inline) handlers below are
+    // In the interests of fairness, the handlers below are
     // called in sequence and without immediate return to the head of
     // the while loop. This is only of issue for slow hosts (or when
     // debugging messages are on). Really slow hosts may find a fast
@@ -1457,7 +1458,7 @@ static void do_housekeeping (unsigned long arg) {
 /********** find an idle channel for TX and set it up **********/
 
 // called with tx_busy set
-static inline short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) {
+static short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) {
   unsigned short idle_channels;
   short tx_channel = -1;
   unsigned int spin_count;
@@ -1776,13 +1777,13 @@ static void hrz_reset (const hrz_dev * dev) {
 
 /********** read the burnt in address **********/
 
-static inline void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl)
+static void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl)
 {
        wr_regl (dev, CONTROL_0_REG, ctrl);
        udelay (5);
 }
   
-static inline void CLOCK_IT (const hrz_dev *dev, u32 ctrl)
+static void CLOCK_IT (const hrz_dev *dev, u32 ctrl)
 {
        // DI must be valid around rising SK edge
        WRITE_IT_WAIT(dev, ctrl & ~SEEPROM_SK);
@@ -1845,7 +1846,7 @@ static u16 __devinit read_bia (const hrz_dev * dev, u16 addr)
 
 /********** initialise a card **********/
 
-static int __init hrz_init (hrz_dev * dev) {
+static int __devinit hrz_init (hrz_dev * dev) {
   int onefivefive;
   
   u16 chan;