Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
[pandora-kernel.git] / drivers / ata / sata_sis.c
index 18d49ff..9c25a1e 100644 (file)
@@ -67,13 +67,13 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 
 static const struct pci_device_id sis_pci_tbl[] = {
-       { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
-       { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
-       { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
+       { PCI_VDEVICE(SI, 0x180), sis_180 },
+       { PCI_VDEVICE(SI, 0x181), sis_180 },
+       { PCI_VDEVICE(SI, 0x182), sis_180 },
+
        { }     /* terminate list */
 };
 
-
 static struct pci_driver sis_pci_driver = {
        .name                   = DRV_NAME,
        .id_table               = sis_pci_tbl,
@@ -173,7 +173,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
        if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
                pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
 
-       return val|val2;
+       return (val|val2) &  0xfffffffb; /* avoid problems with powerdowned ports */
 }
 
 static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
@@ -212,7 +212,7 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
        if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
                val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
 
-       return val | val2;
+       return (val | val2) &  0xfffffffb;
 }
 
 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
@@ -239,8 +239,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        static int printed_version;
        struct ata_probe_ent *probe_ent = NULL;
        int rc;
-       u32 genctl;
-       struct ata_port_info *ppi[2];
+       u32 genctl, val;
+       struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
        int pci_dev_busy = 0;
        u8 pmr;
        u8 port2_start;
@@ -265,47 +265,53 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        if (rc)
                goto err_out_regions;
 
-       ppi[0] = ppi[1] = &sis_port_info;
-       probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-       if (!probe_ent) {
-               rc = -ENOMEM;
-               goto err_out_regions;
-       }
-
        /* check and see if the SCRs are in IO space or PCI cfg space */
        pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
        if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
-               probe_ent->port_flags |= SIS_FLAG_CFGSCR;
+               pi.flags |= SIS_FLAG_CFGSCR;
 
        /* if hardware thinks SCRs are in IO space, but there are
         * no IO resources assigned, change to PCI cfg space.
         */
-       if ((!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) &&
+       if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
            ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
             (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
                genctl &= ~GENCTL_IOMAPPED_SCR;
                pci_write_config_dword(pdev, SIS_GENCTL, genctl);
-               probe_ent->port_flags |= SIS_FLAG_CFGSCR;
+               pi.flags |= SIS_FLAG_CFGSCR;
        }
 
        pci_read_config_byte(pdev, SIS_PMR, &pmr);
        if (ent->device != 0x182) {
                if ((pmr & SIS_PMR_COMBINED) == 0) {
                        dev_printk(KERN_INFO, &pdev->dev,
-                                  "Detected SiS 180/181 chipset in SATA mode\n");
+                                  "Detected SiS 180/181/964 chipset in SATA mode\n");
                        port2_start = 64;
                }
                else {
                        dev_printk(KERN_INFO, &pdev->dev,
                                   "Detected SiS 180/181 chipset in combined mode\n");
                        port2_start=0;
+                       pi.flags |= ATA_FLAG_SLAVE_POSS;
                }
        }
        else {
-               dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
+               pci_read_config_dword ( pdev, 0x6C, &val);
+               if (val & (1L << 31)) {
+                       dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
+                       pi.flags |= ATA_FLAG_SLAVE_POSS;
+               }
+               else
+                       dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
                port2_start = 0x20;
        }
 
+       probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+       if (!probe_ent) {
+               rc = -ENOMEM;
+               goto err_out_regions;
+       }
+
        if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
                probe_ent->port[0].scr_addr =
                        pci_resource_start(pdev, SIS_SCR_PCI_BAR);