#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.2"
enum {
+ SIL_MMIO_BAR = 5,
+
/*
* host flags
*/
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
-static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
-static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-static void sil_post_set_mode (struct ata_port *ap);
-static irqreturn_t sil_interrupt(int irq, void *dev_instance,
- struct pt_regs *regs);
+static void sil_dev_config(struct ata_device *dev);
+static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
static const struct pci_device_id sil_pci_tbl[] = {
- { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
- { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
- { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
- { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
+ { PCI_VDEVICE(CMD, 0x3112), sil_3112 },
+ { PCI_VDEVICE(CMD, 0x0240), sil_3112 },
+ { PCI_VDEVICE(CMD, 0x3512), sil_3512 },
+ { PCI_VDEVICE(CMD, 0x3114), sil_3114 },
+ { PCI_VDEVICE(ATI, 0x436e), sil_3112 },
+ { PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq },
+ { PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq },
+
{ } /* terminate list */
};
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
};
static const struct ata_port_operations sil_ops = {
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .post_set_mode = sil_post_set_mode,
+ .set_mode = sil_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_mmio_data_xfer,
+ .data_xfer = ata_data_xfer,
.freeze = sil_freeze,
.thaw = sil_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = sil_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .irq_ack = ata_irq_ack,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_pci_host_stop,
};
static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x3f, /* udma0-5 */
+ .udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
/* sil_3112_no_sata_irq */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x3f, /* udma0-5 */
+ .udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
/* sil_3512 */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x3f, /* udma0-5 */
+ .udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
/* sil_3114 */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x3f, /* udma0-5 */
+ .udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
};
unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
- { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
+ /* tf ctl bmdma bmdma2 fifo scr sien mode sfis */
+ { 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
{ 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
{ 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
return cache_line;
}
-static void sil_post_set_mode (struct ata_port *ap)
+/**
+ * sil_set_mode - wrap set_mode functions
+ * @ap: port to set up
+ * @r_failed: returned device when we fail
+ *
+ * Wrap the libata method for device setup as after the setup we need
+ * to inspect the results and do some configuration work
+ */
+
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
{
struct ata_host *host = ap->host;
struct ata_device *dev;
- void __iomem *addr = host->mmio_base + sil_port[ap->port_no].xfer_mode;
+ void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
+ void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
u32 tmp, dev_mode[2];
unsigned int i;
+ int rc;
+
+ rc = ata_do_set_mode(ap, r_failed);
+ if (rc)
+ return rc;
for (i = 0; i < 2; i++) {
dev = &ap->device[i];
tmp |= (dev_mode[1] << 4);
writel(tmp, addr);
readl(addr); /* flush */
+ return 0;
}
-static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
+static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
{
- unsigned long offset = ap->ioaddr.scr_addr;
+ void __iomem *offset = ap->ioaddr.scr_addr;
switch (sc_reg) {
case SCR_STATUS:
break;
}
- return 0;
+ return NULL;
}
-static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
+static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
- void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
- if (mmio)
- return readl(mmio);
- return 0xffffffffU;
+ void __iomem *mmio = sil_scr_addr(ap, sc_reg);
+
+ if (mmio) {
+ *val = readl(mmio);
+ return 0;
+ }
+ return -EINVAL;
}
-static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
- if (mmio)
+ void __iomem *mmio = sil_scr_addr(ap, sc_reg);
+
+ if (mmio) {
writel(val, mmio);
+ return 0;
+ }
+ return -EINVAL;
}
static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
{
+ struct ata_eh_info *ehi = &ap->eh_info;
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
u8 status;
* controllers continue to assert IRQ as long as
* SError bits are pending. Clear SError immediately.
*/
- serror = sil_scr_read(ap, SCR_ERROR);
+ sil_scr_read(ap, SCR_ERROR, &serror);
sil_scr_write(ap, SCR_ERROR, serror);
/* Trigger hotplug and accumulate SError only if the
goto freeze;
}
- if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+ if (unlikely(!qc))
goto freeze;
+ if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ /* this sometimes happens, just clear IRQ */
+ ata_chk_status(ap);
+ return;
+ }
+
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
/* kick HSM in the ass */
ata_hsm_move(ap, qc, status, 0);
+ if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+ ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
+
return;
err_hsm:
ata_port_freeze(ap);
}
-static irqreturn_t sil_interrupt(int irq, void *dev_instance,
- struct pt_regs *regs)
+static irqreturn_t sil_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
- void __iomem *mmio_base = host->mmio_base;
+ void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
int handled = 0;
int i;
static void sil_freeze(struct ata_port *ap)
{
- void __iomem *mmio_base = ap->host->mmio_base;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
u32 tmp;
/* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
static void sil_thaw(struct ata_port *ap)
{
- void __iomem *mmio_base = ap->host->mmio_base;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
u32 tmp;
/* clear IRQ */
/**
* sil_dev_config - Apply device/host-specific errata fixups
- * @ap: Port containing device to be examined
* @dev: Device to be examined
*
* After the IDENTIFY [PACKET] DEVICE step is complete, and a
* appreciated.
* - But then again UDMA5 is hardly anything to complain about
*/
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void sil_dev_config(struct ata_device *dev)
{
+ struct ata_port *ap = dev->ap;
+ int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
unsigned int n, quirks = 0;
- unsigned char model_num[41];
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
- ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
+ ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
for (n = 0; sil_blacklist[n].product; n++)
if (!strcmp(sil_blacklist[n].product, model_num)) {
if (slow_down ||
((ap->flags & SIL_FLAG_MOD15WRITE) &&
(quirks & SIL_QUIRK_MOD15WRITE))) {
- ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
- "(mod15write workaround)\n");
+ if (print_info)
+ ata_dev_printk(dev, KERN_INFO, "applying Seagate "
+ "errata fix (mod15write workaround)\n");
dev->max_sectors = 15;
return;
}
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
- ata_dev_printk(dev, KERN_INFO,
- "applying Maxtor errata fix %s\n", model_num);
+ if (print_info)
+ ata_dev_printk(dev, KERN_INFO, "applying Maxtor "
+ "errata fix %s\n", model_num);
dev->udma_mask &= ATA_UDMA5;
return;
}
}
-static void sil_init_controller(struct pci_dev *pdev,
- int n_ports, unsigned long port_flags,
- void __iomem *mmio_base)
+static void sil_init_controller(struct ata_host *host)
{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
u8 cls;
u32 tmp;
int i;
if (cls) {
cls >>= 3;
cls++; /* cls = (line_size/8)+1 */
- for (i = 0; i < n_ports; i++)
+ for (i = 0; i < host->n_ports; i++)
writew(cls << 8 | cls,
mmio_base + sil_port[i].fifo_cfg);
} else
"cache line size not set. Driver may not function\n");
/* Apply R_ERR on DMA activate FIS errata workaround */
- if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
int cnt;
- for (i = 0, cnt = 0; i < n_ports; i++) {
+ for (i = 0, cnt = 0; i < host->n_ports; i++) {
tmp = readl(mmio_base + sil_port[i].sfis_cfg);
if ((tmp & 0x3) != 0x01)
continue;
}
}
- if (n_ports == 4) {
+ if (host->n_ports == 4) {
/* flip the magic "make 4 ports work" bit */
tmp = readl(mmio_base + sil_port[2].bmdma);
if ((tmp & SIL_INTR_STEERING) == 0)
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_probe_ent *probe_ent = NULL;
- unsigned long base;
+ int board_id = ent->driver_data;
+ const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+ struct ata_host *host;
void __iomem *mmio_base;
- int rc;
+ int n_ports, rc;
unsigned int i;
- int pci_dev_busy = 0;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- rc = pci_enable_device(pdev);
+ /* allocate host */
+ n_ports = 2;
+ if (board_id == sil_3114)
+ n_ports = 4;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
+ rc = pcim_enable_device(pdev);
if (rc)
return rc;
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- pci_dev_busy = 1;
- goto err_out;
- }
+ rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+ host->iomap = pcim_iomap_table(pdev);
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
- goto err_out_regions;
+ return rc;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
- goto err_out_regions;
-
- probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL) {
- rc = -ENOMEM;
- goto err_out_regions;
- }
-
- INIT_LIST_HEAD(&probe_ent->node);
- probe_ent->dev = pci_dev_to_dev(pdev);
- probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
- probe_ent->sht = sil_port_info[ent->driver_data].sht;
- probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
- probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
- probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
- probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->port_flags = sil_port_info[ent->driver_data].flags;
-
- mmio_base = pci_iomap(pdev, 5, 0);
- if (mmio_base == NULL) {
- rc = -ENOMEM;
- goto err_out_free_ent;
- }
-
- probe_ent->mmio_base = mmio_base;
+ return rc;
- base = (unsigned long) mmio_base;
+ mmio_base = host->iomap[SIL_MMIO_BAR];
- for (i = 0; i < probe_ent->n_ports; i++) {
- probe_ent->port[i].cmd_addr = base + sil_port[i].tf;
- probe_ent->port[i].altstatus_addr =
- probe_ent->port[i].ctl_addr = base + sil_port[i].ctl;
- probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma;
- probe_ent->port[i].scr_addr = base + sil_port[i].scr;
- ata_std_ports(&probe_ent->port[i]);
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+ ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
+ ioaddr->altstatus_addr =
+ ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
+ ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
+ ioaddr->scr_addr = mmio_base + sil_port[i].scr;
+ ata_std_ports(ioaddr);
}
- sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
- mmio_base);
+ /* initialize and activate */
+ sil_init_controller(host);
pci_set_master(pdev);
-
- /* FIXME: check ata_device_add return value */
- ata_device_add(probe_ent);
- kfree(probe_ent);
-
- return 0;
-
-err_out_free_ent:
- kfree(probe_ent);
-err_out_regions:
- pci_release_regions(pdev);
-err_out:
- if (!pci_dev_busy)
- pci_disable_device(pdev);
- return rc;
+ return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
+ &sil_sht);
}
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
- ata_pci_device_do_resume(pdev);
- sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
- host->mmio_base);
+ sil_init_controller(host);
ata_host_resume(host);
return 0;
git.openpandora.org / pandora-kernel.git / blobdiff