[libata] PATA drivers: remove ATA_FLAG_SRST

[pandora-kernel.git] / drivers / ata / pata_sl82c105.c

diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index da9e22b..bde7341 100644 (file)
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 
 enum {
        /*
@@ -44,11 +44,12 @@ enum {
 /**
  *     sl82c105_pre_reset              -       probe begin
  *     @ap: ATA port
+ *     @deadline: deadline jiffies for the operation
  *
  *     Set up cable type and use generic probe init
  */
 
-static int sl82c105_pre_reset(struct ata_port *ap)
+static int sl82c105_pre_reset(struct ata_port *ap, unsigned long deadline)
 {
        static const struct pci_bits sl82c105_enable_bits[] = {
                { 0x40, 1, 0x01, 0x01 },
@@ -58,7 +59,7 @@ static int sl82c105_pre_reset(struct ata_port *ap)
 
        if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
                return -ENOENT;
-       return ata_std_prereset(ap);
+       return ata_std_prereset(ap, deadline);
 }
 
 
@@ -300,20 +301,22 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
 
 static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       static struct ata_port_info info_dma = {
+       static const struct ata_port_info info_dma = {
                .sht = &sl82c105_sht,
-               .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .mwdma_mask = 0x07,
                .port_ops = &sl82c105_port_ops
        };
-       static struct ata_port_info info_early = {
+       static const struct ata_port_info info_early = {
                .sht = &sl82c105_sht,
-               .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .port_ops = &sl82c105_port_ops
        };
-       static struct ata_port_info *port_info[2] = { &info_early, &info_early };
+       /* for now use only the first port */
+       const struct ata_port_info *ppi[] = { &info_early,
+                                              &ata_dummy_port_info };
        u32 val;
        int rev;
 
@@ -323,17 +326,14 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
                dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n");
        else if (rev <= 5)
                dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n");
-       else {
-               port_info[0] = &info_dma;
-               port_info[1] = &info_dma;
-       }
+       else
+               ppi[0] = &info_dma;
 
        pci_read_config_dword(dev, 0x40, &val);
        val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
        pci_write_config_dword(dev, 0x40, val);
 
-
-       return ata_pci_init_one(dev, port_info, 1); /* For now */
+       return ata_pci_init_one(dev, ppi);
 }
 
 static const struct pci_device_id sl82c105[] = {