#include <linux/libata.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.9"
+#define DRV_VERSION "1.0"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
static int pdc2027x_cable_detect(struct ata_port *ap);
-static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed);
/*
* ATA Timing Tables based on 133MHz controller clock.
/**
* pdc2027x_prereset - prereset for PATA host controller
- * @ap: Target port
+ * @link: Target link
* @deadline: deadline jiffies for the operation
*
* Probeinit including cable detection.
* None (inherited from caller).
*/
-static int pdc2027x_prereset(struct ata_port *ap, unsigned long deadline)
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
{
/* Check whether port enabled */
- if (!pdc2027x_port_enabled(ap))
+ if (!pdc2027x_port_enabled(link->ap))
return -ENOENT;
- return ata_std_prereset(ap, deadline);
+ return ata_std_prereset(link, deadline);
}
/**
/**
* pdc2027x_set_mode - Set the timing registers back to correct values.
- * @ap: Port to configure
+ * @link: link to configure
* @r_failed: Returned device for failure
*
* The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
* automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
* This function overwrites the possibly incorrect values set by the hardware to be correct.
*/
-static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
- int i;
-
- i = ata_do_set_mode(ap, r_failed);
- if (i < 0)
- return i;
+ struct ata_port *ap = link->ap;
+ struct ata_device *dev;
+ int rc;
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
+ rc = ata_do_set_mode(link, r_failed);
+ if (rc < 0)
+ return rc;
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
pdc2027x_set_piomode(ap, dev);