Merge branches 'release', 'asus', 'sony-laptop' and 'thinkpad' into release

[pandora-kernel.git] / drivers / ata / pata_optidma.c

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index f89bdfd..f9b485a 100644 (file)
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -47,14 +47,15 @@ static int pci_clock;       /* 0 = 33 1 = 25 */
 
 /**
  *     optidma_pre_reset               -       probe begin
- *     @ap: ATA port
+ *     @link: ATA link
  *     @deadline: deadline jiffies for the operation
  *
  *     Set up cable type and use generic probe init
  */
 
-static int optidma_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
 {
+       struct ata_port *ap = link->ap;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        static const struct pci_bits optidma_enable_bits = {
                0x40, 1, 0x08, 0x00
@@ -63,7 +64,7 @@ static int optidma_pre_reset(struct ata_port *ap, unsigned long deadline)
        if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
                return -ENOENT;
 
-       return ata_std_prereset(ap, deadline);
+       return ata_std_prereset(link, deadline);
 }
 
 /**
@@ -323,25 +324,26 @@ static u8 optidma_make_bits43(struct ata_device *adev)
 
 /**
  *     optidma_set_mode        -       mode setup
- *     @ap: port to set up
+ *     @link: link to set up
  *
  *     Use the standard setup to tune the chipset and then finalise the
  *     configuration by writing the nibble of extra bits of data into
  *     the chip.
  */
 
-static int optidma_set_mode(struct ata_port *ap, struct ata_device **r_failed)
+static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed)
 {
+       struct ata_port *ap = link->ap;
        u8 r;
        int nybble = 4 * ap->port_no;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       int rc  = ata_do_set_mode(ap, r_failed);
+       int rc  = ata_do_set_mode(link, r_failed);
        if (rc == 0) {
                pci_read_config_byte(pdev, 0x43, &r);
 
                r &= (0x0F << nybble);
-               r |= (optidma_make_bits43(&ap->device[0]) +
-                    (optidma_make_bits43(&ap->device[0]) << 2)) << nybble;
+               r |= (optidma_make_bits43(&link->device[0]) +
+                    (optidma_make_bits43(&link->device[0]) << 2)) << nybble;
                pci_write_config_byte(pdev, 0x43, r);
        }
        return rc;
@@ -366,7 +368,6 @@ static struct scsi_host_template optidma_sht = {
 };
 
 static struct ata_port_operations optidma_port_ops = {
-       .port_disable   = ata_port_disable,
        .set_piomode    = optidma_set_pio_mode,
        .set_dmamode    = optidma_set_dma_mode,
 
@@ -396,13 +397,11 @@ static struct ata_port_operations optidma_port_ops = {
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
        .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
 
-       .port_start     = ata_port_start,
+       .port_start     = ata_sff_port_start,
 };
 
 static struct ata_port_operations optiplus_port_ops = {
-       .port_disable   = ata_port_disable,
        .set_piomode    = optiplus_set_pio_mode,
        .set_dmamode    = optiplus_set_dma_mode,
 
@@ -432,9 +431,8 @@ static struct ata_port_operations optiplus_port_ops = {
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
        .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
 
-       .port_start     = ata_port_start,
+       .port_start     = ata_sff_port_start,
 };
 
 /**
@@ -451,7 +449,7 @@ static int optiplus_with_udma(struct pci_dev *pdev)
 
        /* Find function 1 */
        dev1 = pci_get_device(0x1045, 0xC701, NULL);
-       if(dev1 == NULL)
+       if (dev1 == NULL)
                return 0;
 
        /* Rev must be >= 0x10 */