firmware: ti_sci: Update ti_sci_msg_req_reboot to include domain

[pandora-u-boot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index e7b5d22..3510dab 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
 obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
@@ -13,6 +14,7 @@ obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
 obj-y += mtd/
+obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/
 obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
 obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
@@ -25,16 +27,18 @@ obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
 obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
 obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
+obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
 obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
 obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
-obj-$(CONFIG_$(SPL_)BOARD) += board/
+obj-$(CONFIG_XEN) += xen/
+obj-$(CONFIG_$(SPL_)FPGA) += fpga/
 
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
 obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_SPL_CACHE_SUPPORT) += cache/
-obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
+obj-$(CONFIG_SPL_CPU) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
@@ -45,7 +49,7 @@ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
 obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
 obj-$(CONFIG_SPL_DM_RESET) += reset/
-obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_DMA) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
@@ -58,7 +62,6 @@ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
 obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
-obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
 endif
@@ -66,6 +69,7 @@ endif
 
 ifdef CONFIG_TPL_BUILD
 
+obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 
 endif
@@ -74,6 +78,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
 obj-y += adc/
 obj-y += ata/
+obj-y += bus/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
@@ -82,7 +87,6 @@ obj-y += cache/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
 obj-$(CONFIG_FASTBOOT) += fastboot/
-obj-$(CONFIG_FPGA) += fpga/
 obj-y += misc/
 obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
@@ -91,6 +95,7 @@ obj-y += dfu/
 obj-$(CONFIG_PCH) += pch/
 obj-y += phy/allwinner/
 obj-y += phy/marvell/
+obj-y += phy/rockchip/
 obj-y += rtc/
 obj-y += scsi/
 obj-y += sound/
@@ -107,7 +112,6 @@ obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += smem/
-obj-y += soc/
 obj-y += thermal/
 obj-$(CONFIG_TEE) += tee/
 obj-y += axi/
@@ -119,3 +123,5 @@ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
 obj-$(CONFIG_DM_RNG) += rng/
 endif
+
+obj-y += soc/